Abstract:Using stereo synthetic aperture radar (SAR) to extract 3-D information has become an important means of continuously improving the spatial resolution and geometric positioning accuracy of spaceborne SAR. However, owing to the large differences in a stereo configuration, such as intersection angle (ITA), it is difficult to guarantee localisation accuracy. This study proposed a method for analysing the stereoscopic intersection capability and verifying the accuracy of spaceborne SAR images. The method is improved from three aspects. First, it considers the complexity of the OPSS and SASS modes and discusses the two cases separately in the theoretical modeling and experimental analysis. Secondly, in the theoretical modeling stage, the error is no longer simplified as originating from only one image, but all images have errors. Finally, the validity of the modeling conclusions is verified using multiple sets of simulated experiments and real SAR experiments. Experiments show that stereo SAR has more potential than single SAR. In the opposite-side stereo (OPSS) mode, the planimetric positioning accuracy of 35.028 m (single SAR) can be improved to 3.132 m (stereo SAR, optimal 1.641 m). By designing a reasonable stereo configuration, the geometric positioning accuracy of the original data can be significantly reduced by 31.896 m. In addition, the results show that, (1) for the symmetric OPSS mode, the planimetric accuracy can be improved, and an increase in the ITA will decrease the vertical accuracy. (2) For the same-side stereo (SASS) mode, the smaller the ITA, the higher the planimetric accuracy (except for a weak ITA). In addition, if the incidence angle (ICA) is fixed, an increase in the ITA increases the vertical accuracy. (3) The base-to-height ratio is not the only prerequisite for the stereo configuration. The recommended ITA value for symmetric OPSS mode is 52–80°, and the suggested ITA threshold for SASS mode is 10–21°. The theoretical results are generally compatible with the previous achievements, which can guide applications such as ground control point production, DSM generation, and 3-D information extraction.

Three-Dimensional Stereo Reconstruction of Buildings Using Polarimetric SAR Images Acquired in Opposite Directions

Reconstruction of the 3D Stereo Buildings from Polarimetric SAR Images in Two Converse Flights

Three-Dimensional Structural Parameter Inversion of Buildings by Distributed Compressive Sensing-Based Polarimetric SAR Tomography Using a Small Number of Baselines

Mixed-Norm Regularization-Based Polarimetric Holographic SAR 3-D Imaging

Polarimetric Multi-view Stereo

Automatic Reconstruction of 3D Objects from Multi-Aspect Part II: Multi-aspect Reconstruction

Reconstruction of Pseudo Quad-Pol Images from General Compact Polarimetric Data.

Automatic Reconstruction of Building Objects from Multiaspect Meter-Resolution Sar Images

Polarimetric Multi-View 3d Reconstruction Based On Parallax Angle And Zenith Angle Optimization

Innovative Rotating SAR Mode for 3D Imaging of Buildings

Reconstruction of the Building Objects from Multi-Aspect High-Resolution SAR Images

Framework for Reconstruction of Pseudo Quad Polarimetric Imagery from General Compact Polarimetry

Three Dimensional Visualization Of Pol-Insar Image

Detection and Reconstruction of the Building Objects from Multi-Aspect SAR Images

Radargrammetric 3D Imaging through Composite Registration Method Using Multi-Aspect Synthetic Aperture Radar Imagery

A Probabilistic Approach for Stereo 3D Point Cloud Reconstruction from Airborne Single-Channel Multi-Aspect SAR Image Sequences

Spaceborne SAR stereoscopic intersection capability analysis and accuracy verification

Three Dimensional Surface Reconstruction with Multistatic SAR.

Least-Squares Estimation for Pseudo Quad-Pol Image Reconstruction from Linear Compact Polarimetric SAR

Computer vision to polarimetric SAR imaging

Iterative Adaptive Based Multi-Polarimetric SAR Tomography of the Forested Areas