Simulation of Diffraction and Interference Experiment Based on MATLAB

Chen Jun

Abstract:Based on the theory of optical diffraction and interference,we simulated the results of single-slit diffraction,Young's interference and multi-slit diffraction using MATLAB.It makes easy to teach optical theory and experiment,in addition,it provides a new way for courseware design.

Physics,Computer Science

What problem does this paper attempt to address?

The Computer Simulation of Optical Interference Experiments

Zhang Gan-yuan

Abstract:Several typical optical interference experiments with Matlab are stated.The drawing results of the experiments are delicate and distinct which makes whole physical process object and offers a new effective supplementary means for optical theory analysis and experiment teaching.

Physics,Computer Science
Computer Simulation Model for Room Diffuse Sound Field

Ge Jian,Shi Jian-ren

DOI: https://doi.org/10.1631/jzus.2000.0402

2000-01-01

Journal of Zhejiang University SCIENCE A

Abstract:With the development of computer simulation technique for room acoustics, diffuse reflection is considered more and more important. In this paper, some models are developed by considering two diffuse factors in a room-diffuse reflection due to room surfaces and scattering due to objects. The surface diffusion is treated by two different methods on the basis of probability analysis or Energy Conservation Law, and the scattering among objects is simulated as a multiple random ray-tracing process. Thus the sound pressure level distribution in a diffuse sound field can be calculated more precisely and easily. Agreement between the computer simulation results and measurements shows the accuracy of the mathematical and physical model and the applicability of the computer simulation methods. These models can be used in noise control engineering, as well as in the practice of acoustical design.
A computer simulation model for room sound field considering diffuse reflection

Jian Ge,Shuoxian Wu

IF: 6.9

1999-01-01

Journal of Environmental Sciences

Abstract:A multiple random ray-tracing model was developed for predicting the distribution of sound pressure levels in an enclosed space of any shape. This model considered two diffuse factors of a room: diffuse reflection due to room surfaces and scattering due to objects. The surface diffusion was treated by two different methods on the basis of probability analysis, and the scattering was simulated by a multiple random ray-tracing process. Thus the sound pressure level distribution in a diffuse sound filed can be calculated more precisely.
Event-by-event Simulation of Double-Slit Experiments with Single Photons

F. Jin,S. Yuan,H. De Raedt,K. Michielsen

DOI: https://doi.org/10.48550/arxiv.0809.0616

2008-01-01

Abstract:We present a computer simulation model that reproduces, event-by-event, the wave mechanical results of double-slit and two-beam interference experiments. The same model also simulates a one-to-one copy of a single-photon interference experiment with a Fresnel biprism (Jacques V. et al., Eur. Phys. J. D, 35 (2005) 561). The model satisfies Einstein's criterion of local causality and is solely based on experimental facts, comprising the apparatuses used in the experiment and the observation of individual detector clicks. Our results prove that it is possible to give a particle-only description of single-photon double-slit experiments.
Quantitative Optic Experiments of Diffraction and Interference Based on Spatial Light Modulator and CCD Camera

ZHU Hao,GUO Hong,SUN Li-qun,TAN Qiao-feng,CAO Liang-cai

DOI: https://doi.org/10.3969/j.issn.1000-0712.2011.10.010

2011-01-01

Abstract:Using the spatial light modulator(SLM) and CCD camera to substitute the traditional lithographic masks and white screens,a novel quantitative diffractive and interferential optics experimental system is developed.Slits,apertures and other patterns generated by plotting software of personal computer are sent to the SLM,their far field diffractive and interferential images are acquired by CCD camera,which are then processed and analyzed quantitatively by personal computer.Slits and apertures' diffraction formulas can be proved by this method.The diffractive and interferential images of abnormal-shaped apertures which are complex distributed may also be observed,stored, measured and analyzed conveniently.
Mathematical Modeling and Simulation Based on the Light Particles Doctrine

Shi Duanyin,Zhang Xiaopeng,Du Hong

DOI: https://doi.org/10.4028/www.scientific.net/amr.529.148

2012-01-01

Advanced Materials Research

Abstract:Gong Zutong academician guessed that the structure of the photon may be similar to the hydrogen atom which consists of a negative charge and a positive charge with the equal power, and the negative charge rotates around the positive charge in a spherical orbit. Based on this conjecture, to establish respectively the equation of photon movement for the dual-slit interference and single slit diffraction experiments. To get respectively the light intensity distribution model using complex integration method. Finally, to get that the width of the diffraction pattern of the conjecture is obviously wider than the results of Born through mathematical simulation in MATLAB software.
Diffractive Optics Experimental System Based on Spatial Light Modulator and CCD

ZHU Hao,TAN Qiao-feng,SUN Li-qun,GUO Hong,HE Qing-sheng,BAI Ben-feng

DOI: https://doi.org/10.3969/j.issn.1006-7167.2011.02.011

2011-01-01

Abstract:This article developed a novel diffractive optics experimental system based on spatial light modulator(SLM) and charge coupled device(CCD).The SLM is used to replace the lithographic masks.The plotting software such as AutoCAD and Matlab are used to generate apertures,slits,and other complex geometric patterns on the screen of a personal computer,which are then sent to the SLM via an interface circuit.An expanded and collimated laser beam illuminates the SLM and produces diffraction patterns that are observed by the aid of a CCD camera combined with a lens after the SLM,which enables the real-time observation,measurement,and analysis of the Fresnel and Fraunhofer diffraction properties.This system can perform diffraction experiments on three types of objects including classical geometrical patterns,circular apertures and slits,and the random distribution of various patterns.The system has good real-time property and can save and analyze diffraction patterns conveniently.
Unified simulation platform for interference microscopy

Felix Hitzelhammer,Anežka Dostálová,Ilia Zykov,Barbara Platzer,Clara Conrad-Billroth,Thomas Juffmann,Ulrich Hohenester

2024-05-13

Abstract:Interferometric scattering microscopy is a powerful technique that enables various applications, such as mass photometry and particle tracking. Here we present a numerical toolbox to simulate images obtained in interferometric scattering, coherent bright-field, and dark-field microscopy. The scattered fields are calculated using a boundary element method, facilitating the simulation of arbitrary sample geometries and substrate layer structures. A fully vectorial model is used for simulating the imaging setup. We demonstrate excellent agreement between our simulations and experiments for different shapes of scatterers and excitation angles. Notably, for angles near the Brewster angle, we observe a contrast enhancement which may be beneficial for nanosensing applications. The software is available as a Matlab toolbox.

Optics
Corpuscular Model of Two-Beam Interference and Double-Slit Experiments with Single Photons

Fengping Jin,Shengjun Yuan,Hans De Raedt,Kristel Michielsen,Seiji Miyashita

DOI: https://doi.org/10.1143/jpsj.79.074401

2010-01-01

Journal of the Physical Society of Japan

Abstract:We introduce an event-based corpuscular simulation model that reproduces the wave mechanical results of single-photon double-slit and two-beam interference experiments and (of a one-to-one copy of an experimental realization) of a single-photon interference experiment with a Fresnel biprism. The simulation comprises models that capture the essential features of the apparatuses used in the experiment, including the single-photon detectors recording individual detector clicks. We demonstrate that incorporating in the detector model, simple and minimalistic processes mimicking the memory and threshold behavior of single-photon detectors is sufficient to produce multipath interference patterns. These multipath interference patterns are built up by individual particles taking one single path to the detector where they arrive one-by-one. The particles in our model are not corpuscular in the standard, classical physics sense in that they are information carriers that exchange information with the apparatuses of the experimental set-up. The interference pattern is the final, collective outcome of the information exchanges of many particles with these apparatuses. The interference patterns are produced without making reference to the solution of a wave equation and without introducing signalling or non-local interactions between the particles or between different detection points on the detector screen.
Game Based Optical Experiment Simulation.

Wenfeng Hu,Jiangchun Guo,Xiaolin Li

DOI: https://doi.org/10.1109/icis.2018.8466521

2018-01-01

Abstract:Optics is an experiment-oriented lesson that plays an important role in middle school physics. Simulation technology based on game engine has attracted many educators and teachers to explore its application in pedagogy because it is attractive, interactive and low-cost. This paper designs an optical experiment simulation based on the Unity3D game engine, which implements three optical experiments: mirror reflection, water refraction and Young’s double-slit interference. Furthermore, this paper constructs an optical experiment simulation software library, which can be reused to other optical simulation experiment system.
Stray light simulation and control in imaging systems including diffraction elements

Xiaotong Li,Zhaofeng Cen

DOI: https://doi.org/10.1117/12.2312444

2018-01-01

Abstract:Some imaging optical systems include diffraction elements, both the even reflected stray light and multi-order diffraction stray light need to be considered at the image. They are related to the reflectivity and diffraction efficiency of optical surfaces. In this paper the binary tree is employed to describe the multifurcating tree in which each sampling ray's information is kept. According to the multi-order diffraction efficiency, paraxial ray and real sampling rays are traced, and the calculating results are applied to analyze the stray light in optical systems including diffraction components, and then the stray light energy distribution at any space especially at the image can be obtained. A new calculated wavelength is used to replace the designing wavelength for binary optical elements to calculate the reflected diffraction stray light. Based on the principles above, the stray light analysis software is developed. By tracing and analyzing all sampling rays the positions of ghosts are shown, especially at image surface. In this procedure, the first surface of the system serves as the entrance pupil or stop, instead of the entrance pupil in original imaging system, so as to collect all sampling rays from all direction, in or out the field of view, and then all possible ghosts are obtained. According to the simulation, the glare shields or control methods can be designed.
Study of Computer Simulation for Digital Optical Fiber Communication System

Jiufeng Dai,Xiaohong Ma,Youcui Wang

DOI: https://doi.org/10.3321/j.issn:1005-0086.1999.03.013

1999-01-01

Abstract:Based on the models of the components in optical communication systems, an application simulation software was developed. An experiment platform for system performance evaluation and theoretical research was built, which can display signal waveform, eye diagrams and give the bit error rate of the system. The result of simulation is in good agreement with the actual performance.
Simulation on Interference Control System in Fourier Transform Spectrograph

施宇锋,周纯杰,尹泉,周永鹏

DOI: https://doi.org/10.16182/j.cnki.joss.2013.04.006

2013-01-01

Abstract:A novel modeling and simulation for the interference control was proposed based on the analysis of the operation principle and application characteristics of the Fourier transform spectrometer. Under the Saber environment, the simulation models of voice coil motor, DSP controller, feedback laser and PWM driver circuit were built by the models and MAST language, and the simulation with optical- electro-mechanical integration was carried out. In the double closed loop control system, the system tracked the desired optical path difference velocity stably with PI control strategy. Meanwhile, the disturbance caused by micro-vibration was simulated according to its application environment. The simulation results verify the rationality and effectiveness of the model of system. It provides the conveniences of design and debug for the physical system.
A simulation imaging method for actual optical system and results analysis

Fen Neng,Qiangsheng Liu,Hongbo Shang,Zhaofeng Cen,Xiaotong Li

DOI: https://doi.org/10.1117/12.869009

2010-01-01

Abstract:The image quality is the most direct method for evaluating actual optical system's quality. Imaging of standard feather image, such as resolution plate, comet and so on is also frequently used in lens test in optical industry. The existing simulation method for optical system can be divided into two categories. One is using ideal optical system model to simulate image the object formed, but the actual parameters, aberration, processing and assembly of the optical system cannot be considered. The other can calculate the special field's Spot Diagram, Point Spread Function and Module Transfer Function by the optical design software. It is widely used for optimization (design) and image restoration. In this paper, the actual optical system is simulated by our self-developed simulation software, the target image is entered, the ray tracing method is used and the simulated image is received, which is formed by the object image of the practical optical system with errors. Known parameters of the optical system are used in this article. The correctness of simulation results is demonstrated. And the targeted photorealistic images with colors and photometric information can be gotten by the simulation software, and the more rays be used, the more fields be cut, the simulated image much closer to the actual image. The errors possible existing in optical system processing and assembly, such as eccentric, tilt or surface error are considered in our simulation software, and the simulated image we get is affected by these factors. So that we can give the reasonable tolerances, speed up the development efficiency and reduce cost.
Multiple slit interference: a hyperbola based analysis

Joseph Ivin Thomas

DOI: https://doi.org/10.1088/1361-6404/ac05d3

2021-07-22

European Journal of Physics

Abstract:Abstract The textbook description of multiple slit interference employs a standard path difference formula that was originally calculated for the purpose of analyzing Young’s double slit experiment. It was arrived at on the basis of a pair of assumptions that help simplify the geometry of the slit-barrier-screen arrangement and the ensuing formalism needed to estimate the positions of interference fringes on the detection screen. According to the conventional approach, convergent rays of light that emanate from different slits can be treated as effectively parallel in the far field limit. Such a parallel ray approximation-based analysis was shown by Thomas (2019; 2020) to be redundant, paradoxical and limited in accuracy. In this paper, the task of reformulation that began previously with the elementary two-slit experiment is now extended to encompass the N -slit scenario, diffraction at a single-slit and the formation of circular fringes. In order to derive one of the key results (the generalized hyperbola theorem for N -point sources), a novel computational technique called analytical induction is introduced. The procedure involves a synthesis of concepts from Cartesian geometry and discrete mathematics, namely coordinate transformation by Euclidean translation and a method of proof called the principle of mathematical induction, respectively. The final goal attained are two distribution functions that succinctly and precisely describe the variation of intensity of interference fringes on the distant screen, when it is oriented parallel and perpendicular relative to the line joining the sources. A comparison is drawn between the predictions of the conventional and the new analyses by means of numerical-graphical simulation with MATLAB. The theoretical methods and results presented herein may have a significant bearing in areas of applied optics like interferometry and diffraction crystallography. On the pedagogic front, it is suggested that the current geometrical program being visually more intuitive, be incorporated into the standard curriculum of an advanced undergraduate/graduate level course in physical optics, to complement the conventional approach.

physics, multidisciplinary,education, scientific disciplines
Application of liquid crystal spatial light modulator in optical comprehensive experiment teaching

LI Hai-feng,LIU Xu,LIU Xiang-dong

DOI: https://doi.org/10.3321/j.issn:1002-1582.2008.z1.066

2008-01-01

Optical Technique

Abstract:An optical experiment system using liquid crystal spatial light modulators is introduced in student's optical comprehensive experiment teaching.The spatial light modulators in the system are photo-addressed liquid crystal light valve and electronic-addressed liquid crystal light valve.Four optical information processing experiments are designed.Good teaching effect is achieved in the teaching experience.
Simulation of diffraction and scattering using the Wigner Distribution Function

Emilie Pietersoone,Jean Michel Létang,Simon Rit,Max Langer

2024-03-13

Abstract:X-ray phase-contrast imaging enhances soft tissue visualization by leveraging the phase shift of X-rays passing through materials. It permits to minimize radiation exposure due to high contrast, as well as high resolution imaging limited by the wavelength of the X-rays. Phase retrieval extracts the phase shift computationally, but simulated images fail to recreate low-frequency noise observed in experimental images. To this end, we propose a new method to simulate phase contrast images using the Wigner Distribution Function. This permits the simulation of wave and particle effects simultaneously and simulates images photon by photon. Here, we give a first demonstration of the method by simulating the Gaussian double-slit experiment. It has the potential for realistic simulation of low-dose imaging.

Optics,Image and Video Processing
Simulation and Implementation of Typical Optical Path Adjustments Involved in an Optical Virtual Lab

LIN Yuan-fang,LI Tuo-yu,ZHENG Xiao-dong,LIU Xu,LIU Xiang-dong

DOI: https://doi.org/10.3969/j.issn.1006-7167.2011.05.006

2011-01-01

Abstract:To avoid the limits of traditional optical real lab on the opening hours,space and equipments,an object-oriented approach was applied to the modeling of virtual equipments and the simulation of various experimental scenes and status were realized through developing of event driven applications based on C# language in Visual Studio 2005.Real-time interactive virtual adjustments of optical paths which include adjusting the laser beam to be parallel to the work platform,adjusting the chief ray of the laser beam to go through the center of the lens optical surface,adjusting the pinhole to position in the focus of the extender lens,adjusting the collimating lens based on shearing interferometry to get collimated laser beam,adjusting the grating in spectrometer to locate in the plane perpendicular to the optical axis and the grating line to be parallel to the slit,could be simulated through operations of the mouse and keyboard.This WYSIWYG way of virtual experiment needs no real experimental equipment support,can realize concept of if users can't come to the lab…,the lab without walls will come to users!,is helpful to enhance perceptual knowledge and deepen the understanding of the optical basic theory.
Study of optical interference using Fresnel biprism

Zhen-jun YANG,Jing-zhou XU,Zhao-guang PANG,Yu-xian LI

DOI: https://doi.org/10.3969/j.issn.1005-4642.2017.04.006

2017-01-01

Abstract:The basic optical principle and the experimental process of the Fresnel biprism interference experiment were presented in brief.The common problems in experimental teaching, such as no interference fringe detected, large measurement error, choosing of convex glass and non-uniform interference fringes, were discussed in detail, and the solving methods were given.
Simulation Tool for the Visualization of EM Wave Reflection and Refraction

Luiz C. Trintinalia

DOI: https://doi.org/10.1109/map.2013.6474525

IF: 3.179

2013-02-01

IEEE Antennas and Propagation Magazine

Abstract:This papers presents a simulation tool that can be helpful in teaching the concepts related to the reflection and refraction of electromagnetic waves incident on a planar interface between two dielectric media. It is implemented in MATLAB This tool provides a very flexible graphical interface, with multiple viewing formats for static images or animations. It presents an easy-to-use graphical interface that allows the analysis of any pair of dielectric/conducting media at any incidence angle with linear TE or TM polarization, as well as circular polarization. Different viewing modes, which can be simultaneously presented in a single window, plus the graphical tools already available in all MATLAB graphical windows, provide a simple and efficient interactive environment for the visualization and understanding of the EM reflection phenomena. The implementation of the simulation tool uses an analytical formulation instead of a numerical formulation, providing fast calculations for any modifications in the geometry.

telecommunications,engineering, electrical & electronic

Simulation of Diffraction and Interference Experiment Based on MATLAB

The Computer Simulation of Optical Interference Experiments

Computer Simulation Model for Room Diffuse Sound Field

A computer simulation model for room sound field considering diffuse reflection

Event-by-event Simulation of Double-Slit Experiments with Single Photons

Quantitative Optic Experiments of Diffraction and Interference Based on Spatial Light Modulator and CCD Camera

Mathematical Modeling and Simulation Based on the Light Particles Doctrine

Diffractive Optics Experimental System Based on Spatial Light Modulator and CCD

Unified simulation platform for interference microscopy

Corpuscular Model of Two-Beam Interference and Double-Slit Experiments with Single Photons

Game Based Optical Experiment Simulation.

Stray light simulation and control in imaging systems including diffraction elements

Study of Computer Simulation for Digital Optical Fiber Communication System

Simulation on Interference Control System in Fourier Transform Spectrograph

A simulation imaging method for actual optical system and results analysis

Multiple slit interference: a hyperbola based analysis

Application of liquid crystal spatial light modulator in optical comprehensive experiment teaching

Simulation of diffraction and scattering using the Wigner Distribution Function

Simulation and Implementation of Typical Optical Path Adjustments Involved in an Optical Virtual Lab

Study of optical interference using Fresnel biprism

Simulation Tool for the Visualization of EM Wave Reflection and Refraction