Abstract:Lithium-sulfur battery has attracted extensive research interest because of its high theoretical specific capacity, low cost and environmental friendliness. However, its practical application is still limited by the low utilization of sulfur, serious shuttle and polarization effects. To solve these problems, confining sulfur in a highly conductive host, with the assistance of chemical adsorption of intermediate lithium polysulfides (LiPS) by polar sites and catalytic promotion of LiPS conversion by catalytic sites, can effectively boost the charge transfer and suppress the shuttle and polarization effects, hence leading to the high utilization of sulfur and the improved performances of lithium-sulfur batteries. Hollow carbon nanocages have become an ideal host for sulfur encapsulation because of the large inner cavity, high conductivity, and tunable surface and electronic structures. In this study, three kinds of hollow carbon nanocages with similar size but different composition and structure of shells were prepared by etching the ZIF8, ZIF67 and ZIF8@ZIF67@ZIF8 precursors with tannic acid solution, followed by the carbonization. Used as the cathodes for lithium-sulfur batteries after sulfur filling, the sample derived from ZIF8@ZIF67@ZIF8 shows the best electrochemical performance. Specifically, the specific capacity reaches 1010 mAh.g(-1) at 0.1 C (1 C=1675 mA.g(-1)), and remains 664 mAh.g(-1) at 1 C; after 300 cycles tests at 0.5 C, the capacity is retained at 492 mAh.g(-1), significantly better than the control samples derived from ZIF8 and ZIF67. The excellent performance of the former is closely related to its unique structure and composition: (.) the Co species presented in the precursor can improve the conductivity of derived carbon nanocages; (.) the evaporation of Zn species brings about large specific surface area and rich micro/mesopores, which is conducive to the sulfur filling and the catalytic conversion of S species by the active Co species. Therefore, the shuttle and polarization effects are efficiently suppressed and the utilization of sulfur is improved accordingly, leading to the better performances of lithium-sulfur batteries. This study opens a new avenue to regulate the performance of lithium-sulfur batteries by constructing novel carbon nanocages hosts based on the metal organic framework (MOF) precursors.

Engineering the morphology/porosity of oxygen-doped carbon for sulfur host as lithium-sulfur batteries

A Combined Ordered Macro‐Mesoporous Architecture Design and Surface Engineering Strategy for High‐Performance Sulfur Immobilizer in Lithium–Sulfur Batteries

Electrochemical investigation of Li-ion diffusion and absorbing polysulfide of hierarchically structured carbon for the quasi-solid lithium-sulfur batteries

Engineering the Conductive Network of Metal Oxide‐Based Sulfur Cathode toward Efficient and Longevous Lithium–Sulfur Batteries

Sulfur-infiltrated porous carbon microspheres with controllable multi-modal pore size distribution for high energy lithium–sulfur batteries

Integrated interconnected porous and lamellar structures realized fast ion/electron conductivity in high-performance lithium-sulfur batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Carbon-coated Mesoporous Fe 3 O 4 Nanospindles with Interconnected Porosities as Polysulfide Mediator for Lithium-Sulfur Batteries

Promoting sulfur immobilization by a hierarchical morphology of hollow carbon nanosphere clusters for high-stability Li–S battery

Tailored Reaction Route by Micropore Confinement for Li–S Batteries Operating under Lean Electrolyte Conditions

Exploiting Natural Diatom Shells as an Affordable Polar Host for Sulfur in Li-S Batteries

Structural Regulation of Metal Organic Framework-derived Hollow Carbon Nanocages and Their Lithium-Sulfur Battery Performance

Hierarchically porous, ultrathin N–doped carbon nanosheets embedded with highly dispersed cobalt nanoparticles as efficient sulfur host for stable lithium–sulfur batteries

Coordinated Immobilization and Rapid Conversion of Polysulfide Enabled by a Hollow Metal Oxide/Sulfide/Nitrogen‐Doped Carbon Heterostructure for Long‐Cycle‐Life Lithium‐Sulfur Batteries

Double-oxide Sulfur Host for Advanced Lithium-Sulfur Batteries

Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

Combination of heterostructure with oxygen vacancies in Co@CoO1-x nanosheets array for high-performance lithium sulfur batteries

3D Cotton-Pad-Like Hierarchically Porous Structure Stacked by Hexagonal Highly Graphitized Carbon Nanosheets as Sulfur Immobilizers for Li–S Batteries

Porous Fe2O3 Doped Cathodes for Lithium-Sulfur Batteries

A Highly Efficient Sulfur Host Enabled by Nitrogen/Oxygen Dual‐Doped Honeycomb‐Like Carbon for Advanced Lithium–Sulfur Batteries

Dipolar and catalytic effects of an Fe<sub>3</sub>O<sub>4</sub> based nitrogen-doped hollow carbon sphere framework for high performance lithium sulfur batteries