Abstract:Poly(lactide-co-glycolide) (PLGA) copolymers are the most prevalent materials for tissue engineering applications. To mimic the real microenvironment of extracellular matrix (ECM) for cell growth, nanofibrous PLGA scaffolds are preferred. PLGA5050 (in which the molar ratio of lactidyl to glycolidyl units is 50:50), which is an utterly amorphous polymer, was first reported to be made into nanofibrous networks (fiber diameter around 500nm) using phase separation from PLGA5050/THF solutions in this study. The concentration of polymeric solution had significant effects on fiber diameter and unit length. Nonsolvent (e.g. H2O) was unnecessary to form the PLGA5050 gel, which was critical to nanofibrosis, as if the environmental temperature for gelation occurrence was low enough (−70°C). The physical crosslinks to stabilize the PLGA5050/THF gel were believed to be GA segments along the backbone owing to their inferior solubility in THF. The addition of H2O would cause adverse effects of liquid–liquid phase separation and nanofibrosis failure owing to the hydrophilicity of glycolidyl units. Associating with the phase separation method, particle-leaching technique was applied to fabricate three-dimensional scaffolds with macroporous and nanofibrous structures. To ensure the occurrence of nanofibrosis on macropore walls, the temperature of salt particles should be best lowed to −70°C beforehand. Accordingly, scaffolds prepared under varied parameters exhibited different nanofiber and pore morphologies, which affected the pore size, porosity, specific surface area, water contact angle and protein adsorption ability etc. The preliminary cell (MC3T3-E1) culture confirmed the cell ingrowth into the macroporous and nanofibrous PLGA5050 scaffolds in comparison with the solely nanofibrous matrixes. This kind of bi-scaled three dimensional matrixes can be superior candidate scaffolds for tissue engineering applications.

Preparation of macroporous biodegradable PLGA scaffolds for cell attachment with the use of mixed salts as porogen additives

Preparation of Highly Porous Interconnected Poly(Lactic Acid) Scaffolds Based on A Novel Dynamic Elongational Flow Procedure

Porous Poly (Lactic-Co-glycolide) Microsphere Sintered Scaffolds for Tissue Repair Applications

Particle-collision and Porogen-Leaching Technique to Fabricate Polymeric Porous Scaffolds with Microscale Roughness of Interior Surfaces

Preparation of Macroporous Polymer Scaffolds Using Calcined Cancellous Bone As a Template.

Effect of sodium chloride as a porogen agent in mechanical properties of PLGA/HA nanocomposite scaffolds

Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique

Facile Fabrication of Poly(l-Lactic Acid)-Grafted Hydroxyapatite/poly(lactic-Co-glycolic Acid) Scaffolds by Pickering High Internal Phase Emulsion Templates.

Macroporous biodegradable natural/synthetic hybrid scaffolds as small intestine submucosa impregnated poly(D,L-lactide-co-glycolide) for tissue-engineered bone

Physical and degradation properties of PLGA scaffolds fabricated by salt fusion technique

Porous Polycaprolactone/nanohydroxyapatite Tissue Engineering Scaffolds Fabricated by Combining NaCl and PEG As Co-Porogens: Structure, Property, and Chondrocyte-Scaffold Interaction in Vitro.

Facile Fabrication of Poly(l-Lactic Acid) Microsphere-Incorporated Calcium Alginate/hydroxyapatite Porous Scaffolds Based on Pickering Emulsion Templates

Macroporous Poly (L-Lactic Acid)/chitosan Nanofibrous Scaffolds Through Cloud Point Thermally Induced Phase Separation for Enhanced Bone Regeneration

Preparation and properties of poly(lactide-co-glycolide) (PLGA)/ nano-hydroxyapatite (NHA) scaffolds by thermally induced phase separation and rabbit MSCs culture on scaffolds

Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching

Fabrication of Poly(lactide‐co‐glycolide) Scaffold Embedded Spatially with Hydroxyapatite Particles on Pore Walls for Bone Tissue Engineering

The Effect of Poly(lactic-Co-glycolic Acid) (PLGA) Coating on the Mechanical, Biodegradable, Bioactive Properties and Drug Release of Porous Calcium Silicate Scaffolds

Gas anti-solvent precipitation assisted salt leaching for generation of micro- and nano-porous wall in bio-polymeric 3D scaffolds

Preparation, physicochemical properties and biocompatibility of PBLG/PLGA/bioglass composite scaffolds

3D printed porous PLGA/n-HA/MgP composite scaffolds with improved osteogenic and angiogenic properties

A Novel Poly (Lactic-Co-Glycolic Acid)-Collagen Hybrid Scaffold Fabricated Via Multi-Nozzle Low-Temperature Deposition