Abstract:Abstract Despite the relatively numerous experimental studies, there are few published works on the topic of development of mathematical models that describe the hydrodynamic processes in gears. There is no generic analytical model that integrates all types of losses. The purpose of this work is to develop a modern generalised methodology for calculating the hydrodynamic power losses of high-speed gears. For each gear, partially or fully immersed into an oil bath, the power spent to overcome the hydromechanical resistance can be represented as the sum of the following: the Coriolis force moment arising from the radial movement of the oil in the tooth spaces of the rotating gear, the viscous friction forces moment on the periphery of the gear addendums in the oil bath and the viscous friction forces moment at the face of the gear in the oil bath. The hydrodynamic power losses due to the Coriolis force action, viscosity friction losses at the periphery of the gear and the viscosity friction at the face of the gear (both turbulent and laminar modes) were observed separately. From the mathematical simulation of the rotation processes when the gear is immersed into the oil bath, an analytical dependence was obtained. It allows predicting the influence of the geometrical parameters of the gearing on the hydrodynamic power losses. Analysis of the calculation results of the power losses due to the action of hydraulic resistance forces and results from experimental studies is provided for several gears with different hydromechanical parameters. The proposed method of calculating power loss due to hydromechanical resistance of the oil bath to the rotation of the gear gave results that were close to the experimental data. Acceptable coincidence of theoretical and experimental results allows recommending the received analytical dependencies for practical calculations of high-speed gears.

A unified analytical model to calculate no-load power losses for the coexistence of windage-churning phenomenon for spiral bevel gears

Numerical study on the churning power loss of spiral bevel gears at splash lubrication system

A New Computational Method of the Friction Power Loss of Spiral Bevel Gears of a Helicopter Reducer

A Novel Prediction Model for Churning Power Loss of Spur Gear

Modeling and Analysis of the Churning Losses Characteristics of Swash Plate Axial Piston Pump

Windage Power Losses of Ordinary Gears: Different CFD Approaches Aimed to the Reduction of the Computational Effort

Power Losses of Spiral Bevel Gears: An Analysis Based on Computational Fluid Dynamics

Windage Loss Characteristics of Aviation Spiral Bevel Gear and Windage Reduction Mechanism of Shroud

Piecewise Model and Experiment of Power Chuck's Gripping Force Loss During High Speed Turning

Modeling and analysis of transient lubrication characteristic of the helicopter main transmission spiral bevel gears in point contacts

Modeling of ball bearing churning losses

Numerical Calculation Analysis and Characteristic Research on Windage Loss of Oil-Jet Lubricated Aviation Gear Pair

Determination of Hydrodynamic Power Losses in a Gearing

Dynamics characteristics of wind turbine gear pairs considering lubrication and tooth surface roughness

Dynamic Analysis of Helical Gears with Sliding Friction and Gear Errors

Numerical and Experimental Investigation of Splashing Oil Flow in a Hypoid Gearbox

Quasi-static Analysis Based on Generalized Loaded Static Transmission Error and Dynamic Investigation of Wide-Faced Cylindrical Geared Rotor Systems

Tribo-dynamics Modeling and Analysis of Planetary Gear Bearing Systems in Wind Turbines Considering Sun-Planetary-ring Helical Gear Mesh and Elastic Deformation Effects

A Theoretical and Experimental Study on the Power Loss of Gearbox Based on Dimensionless Analysis

Rough tooth flank thermal elastohydrodynamic lubrication analysis model of spiral bevel gears

Dynamic Modeling and Analysis of Wind Turbine Drivetrain Considering the Effects of Non-Torque Loads