Abstract:Abstract Despite the relatively numerous experimental studies, there are few published works on the topic of development of mathematical models that describe the hydrodynamic processes in gears. There is no generic analytical model that integrates all types of losses. The purpose of this work is to develop a modern generalised methodology for calculating the hydrodynamic power losses of high-speed gears. For each gear, partially or fully immersed into an oil bath, the power spent to overcome the hydromechanical resistance can be represented as the sum of the following: the Coriolis force moment arising from the radial movement of the oil in the tooth spaces of the rotating gear, the viscous friction forces moment on the periphery of the gear addendums in the oil bath and the viscous friction forces moment at the face of the gear in the oil bath. The hydrodynamic power losses due to the Coriolis force action, viscosity friction losses at the periphery of the gear and the viscosity friction at the face of the gear (both turbulent and laminar modes) were observed separately. From the mathematical simulation of the rotation processes when the gear is immersed into the oil bath, an analytical dependence was obtained. It allows predicting the influence of the geometrical parameters of the gearing on the hydrodynamic power losses. Analysis of the calculation results of the power losses due to the action of hydraulic resistance forces and results from experimental studies is provided for several gears with different hydromechanical parameters. The proposed method of calculating power loss due to hydromechanical resistance of the oil bath to the rotation of the gear gave results that were close to the experimental data. Acceptable coincidence of theoretical and experimental results allows recommending the received analytical dependencies for practical calculations of high-speed gears.

A Theoretical and Experimental Study on the Power Loss of Gearbox Based on Dimensionless Analysis

Windage Power Losses of Ordinary Gears: Different CFD Approaches Aimed to the Reduction of the Computational Effort

Classification of numerical, experimental, and analytical approaches for gearbox oil flow and no-load gear power loss

Numerical modeling and experimental validation of power loss and efficiency in an electric-drive axle system

A New Integrated Approach for the Prediction of the Load Independent Power Losses of Gears: Development of a Mesh-Handling Algorithm to Reduce the CFD Simulation Time

Determination of Hydrodynamic Power Losses in a Gearing

Power Losses of Spiral Bevel Gears: An Analysis Based on Computational Fluid Dynamics

A Novel Prediction Model for Churning Power Loss of Spur Gear

A unified analytical model to calculate no-load power losses for the coexistence of windage-churning phenomenon for spiral bevel gears

Modelling and Experimental Study of Power Losses in Toothed Wheels

Gear dynamics and power loss

Research on the efficiency analysis method of 9AT transmission planetary gear system based on power loss

Load Distribution Analysis Considering Corner Contact Effects to Predict the Mechanical Efficiency of Spur Gears

Numerical and Experimental Investigation of Splashing Oil Flow in a Hypoid Gearbox

Dynamic Modeling and Simulation of Double-Planetary Gearbox Based on Bond Graph

Research on internal flow field analysis and power loss modeling of the expansion seal ring

Numerical Calculation Analysis and Characteristic Research on Windage Loss of Oil-Jet Lubricated Aviation Gear Pair

Dynamic analysis of a helical gear reduction by experimental and numerical methods

Bearing Power Losses with Water-Containing Gear Fluids

A New Computational Method of the Friction Power Loss of Spiral Bevel Gears of a Helicopter Reducer

Power flow and efficiency analysis of 2K-V gear transmission via virtual power