Abstract:When studying the stability of a slope, the first issue that needs to be clarified is the slip surface, which determines the minimum safety factor. The slopes investigated here are homogenous with three distinct gradients (1:1.5; 1:1; 2:1), two defined heights (H-3 m; H-8 m), and four different soil characteristics (S1—clayey silt, S2—sandy clayey silt, S3—sandy silty clay, S4—clay). The purpose of this paper is to develop a new methodology capable of estimating the safety factor and the shape and centre of the critical slip surface, delivering an improved estimate of slope probability of failure, which can represent a significant component in a more precise risk assessment. This paper compares distinct methods used in the slope stability analysis, examining their hypotheses and effects on the estimated safety factor and the centre and shape of the critical slip surface. The study compares the limit equilibrium results with those determined by the shear strength reduction method using an approach based on the upper-bound limit analysis to compare the predictions extracted from these methods with those from the finite element method (FEM) analysis. The finite element method discretizes the soil mass into finite elements. Hence, it establishes a kinematically admissible velocity field searching for the failure mechanism of the slope. Results for FEM show the influence of the slope geometry and the mesh size and density on the safety factor. In the study, plots of the regression curves of five different critical slip surface shapes, including a circular slip surface (benchmark), show that the shape of the failure surface depends on the shape and material of the slope. Furthermore, they show that the critical slip surface layout can approach a logarithmic spiral, damped sinusoid, parabola, etc.; the slip surface is not always circular. The analysis reveals that none of the approaches can consider all uncertainties concerning the factor of safety and the interpretations of critical slip surfaces.

Probabilistic Slope Stability Analysis by Finite Elements

Reliability analysis for slope stable capacity based on fuzzy probability

Efficient Reliability Analysis of Slopes Integrating the Random Field Method and a Gaussian Process Regression‐based Surrogate Model

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Random Finite-Element Analysis of Slope Considering Strength Anisotropy and Spatial Variability of Soil

Slope Failure Criteria of Shear Strength Reduction Finite Element Method

Element Failure Probability of Soil Slope under Consideration of Random Groundwater Level

Probabilistic Slope Stability Analysis Considering the Variability of Hydraulic Conductivity under Rainfall Infiltration–redistribution Conditions

Reliability analysis of progressive failure of strain softening slope

Probabilistic assessment of slope failure considering anisotropic spatial variability of soil properties

Efficient Method for Calculating Slope Failure Risk Based on Element Failure Probability

Stability evaluation of gentle slopes in spatially variable soils using discretized limit analysis method: a probabilistic study

Fuzzy Random Reliability Analysis of Blocky Rock-Mass in Slopes

Slope stability analysis based on the rigid finite element method

Comparing 2D and 3D slope stability in spatially variable soils using random finite-element method

Stability and Reinforcement Analysis of Rock Slope Based on Elasto-Plastic Finite Element Method

Element Failure Risk Assessment of Soil Slope

Stability analysis of elasto-plastic soil slope by reproducing kernel particle method

Three-dimensional Reliability Analysis of Slope Stability

Probabilistic Based Reliability Slope Stability Analysis Using FOSM, FORM, and MCS

Sustainable Slope Stability Analysis: A Critical Study on Methods