Abstract:Reliability analysis of reinforced slopes is crucial in geotechnical engineering. In this study, a procedure is proposed for calculating the reliability of three-dimensional reinforced slopes, taking into consideration the spatial variability of soil strength parameters. An ellipsoidal sliding surface is utilized as an approximate substitute for the actual sliding surface. The Karhunen–Loève (K–L) expansion method is employed to generate random fields. The safety factor calculations are based on the Bishop method. The reliability is evaluated through the Monte Carlo simulation. Based on the procedure, the effects of different reinforcement parameters and random parameters on the mean safety factor and failure probability of three-dimensional slopes are studied and compared with the results of two-dimensional slopes. Notably, the implementation of an upper sparse and lower dense reinforcement scheme leads to a remarkable enhancement in slope reliability, resulting in a substantial 38.4% reduction in failure probability and a 2.4% increase in the safety factor. Additionally, an effective means of enhancing slope reliability is found to be the increase in the length and number of reinforcement layers. The reliability of 3D reinforced slopes is notably influenced by the spatial variability of soil strength parameters. The degree of influence of autocorrelation distance on the failure probability is ranked as l z > l x > l y . When l z increases from 1 to 5 m, the failure probability is increased by 221.85%, from 5.4 to 17.38%. As the correlation coefficient is increased from −0.7 to −0.3, the failure probability increased by 26.7%, from 23.2% to 29.4%. The comparison with 2D reinforced slopes reveals that 3D reinforced slopes demonstrate a higher safety factor and a lower failure probability. As a result, slope reliability is tended to be underestimated by the 2D slope analysis.

Comparing 2D and 3D slope stability in spatially variable soils using random finite-element method

Efficient Reliability Analysis of Slopes Integrating the Random Field Method and a Gaussian Process Regression‐based Surrogate Model

An Investigation of Cross-Sectional Spatial Variation with Random Finite Element Method Slope Stability Analysis

Evaluating Slope Stability with 3D Limit Equilibrium Technique and Its Application to Landfill in China

Probabilistic Risk Assessment of Slope Failure in 3-D Spatially Variable Soils by Finite Element Method

Numerical Modeling of 3D Slopes with Weak Zones by Random Field and Finite Elements

3D slope reliability analysis based on the intelligent response surface methodology

Stability evaluation of gentle slopes in spatially variable soils using discretized limit analysis method: a probabilistic study

Three-dimensional Reliability Analysis of Slope Stability

Effect of the Spatial Variability of Soil Parameters on the Deformation Behavior of Excavated Slopes

Probabilistic assessment of slope failure considering anisotropic spatial variability of soil properties

Probabilistic Slope Stability Analysis Considering the Variability of Hydraulic Conductivity under Rainfall Infiltration–redistribution Conditions

Reliability analysis of three-dimensional reinforced slope considering the spatial variability in soil parameters

Dynamic reliability analysis of three-dimensional slopes considering the spatial variability in soil parameters

Assessing Slope Stability with an Improved 3D Numerical Manifold Method

Random Finite-Element Analysis of Slope Considering Strength Anisotropy and Spatial Variability of Soil

Element Failure Probability of Soil Slope under Consideration of Random Groundwater Level

Probabilistic Assessment of Seismic Stability of a Rock Slope by Combining the Simulation of Stochastic Ground Motion with Permanent Displacement Analysis

Probabilistic Slope Stability Analysis by Finite Elements

Stochastic Bearing Capacity and Failure Mechanism of Footings Placed Adjacent to Slopes considering the Anisotropic Spatial Variability of the Clay Undrained Strength

Quasi-Monte Carlo Simulation-Based SFEM for Slope Reliability Analysis