Abstract:Submarine cables and pipelines laid on the seafloor are critical infrastructures for energy transportation and communication transmission and must be inspected in a timely manner to determine maintenance needs. Autonomous inspection of cables (including pipelines) and their surroundings using underwater vehicles is difficult because of sensor myopia and deviations in cable routing. This study proposes an automatic cable-tracking method (ACTM) based on side-scan sonar (SSS) that endows autonomous underwater vehicles (AUVs) with autonomous decision-making capabilities to achieve fast localization and stable tracking of submarine cables with large uncertainties. Compared with the traditional predefined waypoint method, the proposed method decomposes the tasks into a series of independent behaviors according to operational objectives; thus, the AUV can perform online dynamic task replanning and realize an autonomous coverage search of the target region. When a cable is detected, the cable-tracking task is constructed as a path-following control problem on the horizontal plane. To reduce uncertainties caused by environmental noise and sensor measurement errors, a uniform motion model based on target tracking theory was used to model the virtual mass abstracted from the cable, and the states of the cable were estimated using the Kalman filter. Subsequently, an adaptive line-of-sight guidance algorithm for the SSS is established to dynamically adjust the look-ahead distance by introducing states such as cable curvature and angular change rate, which somewhat alleviates the tracking loss caused by the SSS short-sightedness. The proposed ACTM effectiveness and robustness were validated through numerical simulations and field tests. The results showed that the proposed method can achieve automatic search and adaptive tracking of cables, further reducing the role of humans in the task.

Attitude-Independent Route Tracking for Subsea Power Cables Using a Scalar Magnetometer under High Sea Conditions

Dual-probe Type Submarine Cable Routing and Depth Detection System Design

Underwater Electromagnetic Guidance Based on the Magnetic Dipole Model Applied in AUV Terminal Docking

Geographic True Navigation Based on Real-Time Measurements of Geomagnetic Fields.

Use of a Coded Voltage Signal for Cable Switching and Fault Isolation in Cabled Seafloor Observatories

Fault Detection and Isolation Methods in Subsea Observation Networks

A New Method for Locating Positions of Single-Core Cables in Three-Phase Submarine Power Circuits Based on Phase Difference Data

Interference Cancellation and Wavelet Denoising for Magnetometers in Electric Work-Class Rovs

Automatic Tracking Method for Submarine Cables and Pipelines of AUV Based on Side Scan Sonar

Underwater Cable Localization Method Based on Beetle Swarm Optimization Algorithm

Study of a Novel Underwater Cable with Whole Cable Monitoring

Construction and experimental verification research of a magnetic detection system for submarine pipelines based on a two-part towed platform

Prediction-Based Submarine Cable-Tracking Strategy for Autonomous Underwater Vehicles with Side-Scan Sonar

Submarine cable detection using an end-to-end neural network-based magnetic data inversion

Submarine Cable Detection Method Based on Multisensor Communication

Accurate Source-Receiver Positioning Method for a High-Resolution Deep-Towed Multichannel Seismic Exploration System

Attitude Magnetic Measurement Compensation Method of Fiber-optic Submarine Seismometer

A Bionic Data-driven Approach for Long-distance Underwater Navigation with Anomaly Resistance

Underground Power Cable Detection and Inspection Technology Based on Magnetic Field Sensing at Ground Surface Level