Abstract:Silicon-based anodes are promising to replace graphite-based anodes for high-capacity lithium-ion batteries (LIB). However, the charge–discharge cycling suffers from internal stresses created by large volume changes of silicon, which form silicon-lithium compounds, and excessive consumption of lithium by irreversible formation of lithium-containing compounds. Consumption of lithium by the initial conditioning of the anode, as indicated by low initial coulombic efficiency (ICE), and subsequently continuous formation of solid-electrolyte-phase (SEI) on the freshly exposed silicon surface, are among the main issues. A high-performance, silicon-based, high-capacity anode exhibiting 88.8% ICE and the retention of 2 mAh/cm2 areal capacity after 200 discharge–charge cycles at the rate of 1 A/g is reported. The anode is made on a copper foil using a mixture of 70%:10%:20% by weight ratio of silicon flakes of 100 × 800 × 800 nm in size, Super P conductivity enhancement additive, and an equal-weight mixture of CMC and SBR binders. Pyrolysis of fabricated anodes at 700 °C in argon environment for 1 h was applied to convert the binders into a porous graphitic carbon structure that encapsulates individual silicon flakes. The porous anode has a mechanically strong and electrically conductive graphitic carbon structure formed by the pyrolyzed binders, which protect individual silicon flakes from excessive reactions with the electrolyte and help keep small pieces of broken silicon flakes together within the carbon structure. The selection and amount of conductivity enhancement additives are shown to be critical to the achievement of both high-ICE and high-capacity retention after long cycling. The Super P conductivity enhancement additive exhibits a smaller effective surface area where SEI forms compared to KB, and thus leads to the best combination of both high-ICE and high-capacity retention. A silicon-based anode exhibiting high capacity, high ICE, and a long cycling life has been achieved by the facile and promising one-step fabrication process.

Capacity recovery by transient voltage pulse in silicon-anode batteries

Silicon-Based Materials As High Capacity Anodes for Next Generation Lithium Ion Batteries

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Regulating Lithium Transfer Pathway to Avoid Capacity Fading of Nano Si Through Sub‐Nano Scale Interfused Siox/C Coating

Dynamic spatial progression of isolated lithium during battery operations

Rapid, in situ Synthesis of Ultra-Small Silicon Particles for Boosted Lithium Storage Capability through Ultrafast Joule Heating

Pyromellitic Acid Induced Stable Lithium Ion Batteries Based on Recycled Silicon Flakes

Strategically Controlled Flash Irradiation on Silicon Anode for Enhancing Cycling Stability and Rate Capability toward High-Performance Lithium-Ion Batteries

Progressive growth of the solid–electrolyte interphase towards the Si anode interior causes capacity fading

Revival of Microparticular Silicon for Superior Lithium Storage

Exploiting the capacity merits of Si anodes in the energy-dense prototypes via a homogeneous prelithiation therapy

A scalable silicon/graphite anode with high silicon content for high-energy lithium-ion batteries

The Electrochemical Performance of Silicon Nanoparticles in Concentrated Electrolyte

Nanostructure designing and hybridizing of high-capacity silicon-based anode for lithium-ion batteries

High voltage electrolytes for lithium-ion batteries with micro-sized silicon anodes

Prelithiation strategies for silicon-based anode in high energy density lithium-ion battery

High-ICE and High-Capacity Retention Silicon-Based Anode for Lithium-Ion Battery

Improving Electrochemical Performance of Thick Silicon Film Anodes with Implanted Solid Lithium Source Electrolyte

From natural material to high-performance silicon based anode: Towards cost-efficient silicon based electrodes in high-performance Li-ion batteries

Impact of solid-electrolyte interphase reformation on capacity loss in silicon-based lithium-ion batteries

Electrolyte Solvation Engineering toward High-Rate and Low-Temperature Silicon-Based Batteries