Abstract:Si anodes have attracted considerable attention for their potential application in next-generation lithium-ion batteries because of their high specific capacity (Li15Si4, 3579 mAh g-1) and elemental abundance. However, Si anodes have not yet been practically applied in lithium-ion batteries because the volume change associated with lithiation and delithiation degrades their capacity during cycling. Instead of considering the active material, we focused on the structural design and developed a scalable process for producing Si anodes with excellent cycle characteristics while precisely controlling the morphology. Al-Si alloy powders were prepared by gas atomization, and porous Si with a skeletal structure was prepared by leaching Al using HCl. Porous Si (p-Si12, p-Si19) prepared from Al88Si12 and Al81Si19 comprised resinous eutectic Si, and porous Si (p-Si25) prepared from Al75Si25 comprised lumpy primary Si and resinous eutectic Si. The porosity of the Si anodes varied from 63% to 76%, depending on the Si composition. The p-Si19 anode displayed the finest pore distribution (20-200 nm), excellent rate characteristics, a reversible discharge capacity of 1607 mAh g-1 after 200 cycles at a rate of 0.1 C with a Coulombic efficiency of over 97%, and high stability. The performances of the p-Si25 and p-Si19 electrodes began to decrease after 250 and 850 cycles, respectively, with a constant-charge capacity of 1000 mAh g-1 and at a rate of 0.2 C. In contrast, the p-Si12 anode maintained its discharge capacity at 1000 mAh g-1 for up to 1000 cycles without degradation. Therefore, the developed manufacturing process is expected to produce porous Si as an active material in lithium-ion batteries for high capacity and long life at an industrial scale.

From natural material to high-performance silicon based anode: Towards cost-efficient silicon based electrodes in high-performance Li-ion batteries

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Scalable Fabrication of Micro-Sized Bulk Porous Si from Fe–Si Alloy As a High Performance Anode for Lithium-Ion Batteries

High-Performance Porous Silicon/Nanosilver Anodes from Industrial Low-Grade Silicon for Lithium-Ion Batteries.

Multi-step low-cost synthesis of ultrafine silicon porous structures for high-reversible lithium-ion battery anodes

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Facile Fabrication of a Nanoporous Silicon Electrode with Superior Stability for Lithium Ion Batteries

Scalable synthesis of micrometer-sized porous silicon/carbon composites for high-stability lithium-ion battery anodes

Green, Scalable, and Controllable Fabrication of Nanoporous Silicon from Commercial Alloy Precursors for High-Energy Lithium-Ion Batteries

Low-Cost Micron-Scale Silicon-Based Anodes for High-Performance Lithium-Ion Batteries

Electrochemical Performance Enhancement of Porous Si Lithium-Ion Battery Anode by Integrating with Optimized Carbonaceous Materials

Scalable Synthesis of Porous Silicon by Acid Etching of Atomized Al-Si Alloy Powder for Lithium-Ion Batteries

Nonfilling carbon coating of porous silicon micrometer-sized particles for high-performance lithium battery anodes.

Porous Si/Fe2O3 Dual Network Anode for Lithium–Ion Battery Application

Porous Si/Fe<sub>2</sub>O<sub>3</sub> Dual Network Anode for Lithium-Ion Battery Application

Porous Carbon-Coated Silicon Composites for High Performance Lithium-Ion Batterie Anode

Artificial solid electrolyte interphase modified porous SiO composite as anode material for lithium ion batteries

Electrochemical performance of a high-performance SiO composite anode material for Li-ion battery enhanced by piezoelectric effect

Porous Si Nanowires from Cheap Metallurgical Silicon Stabilized by a Surface Oxide Layer for Lithium Ion Batteries