Abstract:Silicon is regarded as one of the most promising anode materials because of its theoretical specific capacity (4200mAh/g) compared to commercially available graphite anodes (370mAh/g). However, Si electrodes suffer considerable volume expansion of up to 300% during electrochemical lithiation, leading to electrode cracking and pulverization of the Si, causing rapid capacity degradation. Various approaches had been used for using nanostructured Si materials have been applied to solve this problem, since the interval distance between nano structures and internal spaces in them can act as structural buffer space to accommodate the volume expansion of Si. Although some of the nanostructured Si materials achieved considerably high capacity and cyclability, they are usually prepared by complicate and high cost synthetic process which are difficult to extend to large scale. The other approach is using active/inactive alloys as an efficient way to reduce volume expansion and improve cycling performance. The volume expansion of Si can be suppressed by the presence of inactive components, resulting in the maximum energy density at a given volume expansion. Literature has also shown commercially available and low-cost Si alloys can serve as high capacity Li-storage anodic host materials with certain cyclability. If such Si alloy compounds can be made with required chemical stoichiometry and structural architecture though a simple mechanochemical process. Wildcat Discovery Technologies is developing facile synthesis pathway to prepare Si-alloy active/inactive material. Our approach utilized high-throughput combinatorial research to optimize synthesis process, Si-alloy composition and electrode component to improve the cycling performance of the anode material. Here we demonstrate that with optimized synthesis process, varied active Si and inactive alloy composition reveal a strong correlation between capacity and cyclability.

Scalable Synthesis of Porous Silicon by Acid Etching of Atomized Al-Si Alloy Powder for Lithium-Ion Batteries

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Scalable synthesis of porous silicon electrodes for lithium-ion batteries via acid etching of atomized Al–Si alloy powders

Scalable Fabrication of Micro-Sized Bulk Porous Si from Fe–Si Alloy As a High Performance Anode for Lithium-Ion Batteries

Large-Scale Synthesis Of Si@C Three-Dimensional Porous Structures As High-Performance Anode Materials For Lithium-Ion Batteries

Pomegranate-like silicon-based anodes self-assembled by hollow-structured Si/void@C nanoparticles for Li-ion batteries with high performances

Green, Scalable, and Controllable Fabrication of Nanoporous Silicon from Commercial Alloy Precursors for High-Energy Lithium-Ion Batteries

Scalable synthesis of ant-nest-like bulk porous silicon for high-performance lithium-ion battery anodes

Solution synthesis of porous silicon particles as an anode material for lithium ion batteries.

Develop a Facil Syntheis Process for Si-Alloy Anode Material for Li-Ion Batteries

A Novel Approach to Synthesize Micrometer-Sized Porous Silicon As a High Performance Anode for Lithium-Ion Batteries

Silver-Assisted Chemical Etching for the Fabrication of Porous Silicon N-Doped Nanohollow Carbon Spheres Composite Anodes to Enhance Electrochemical Performance

Scalable synthesis of micrometer-sized porous silicon/carbon composites for high-stability lithium-ion battery anodes

Porous Si Nanowires from Cheap Metallurgical Silicon Stabilized by a Surface Oxide Layer for Lithium Ion Batteries

A Simple Method to Fabricate Size and Porosity Tunable Si by Al–Si Alloy As Lithium Ion Battery Anode Material

Simultaneous Purification and Perforation of Low-Grade Si Sources for Lithium-Ion Battery Anode.

Preparation of porous silicon by Ag-assisted chemical etching in non-filling type carbon shell for high performance lithium-ion batteries

Scalable Synthesis of High Performance Silicon Anode by Impregnation of Pitch in Nanoporous Silicon

Si Anode Materials for Li-Ion Batteries