Abstract:Carbon steel piping and tubing can be degraded by hydrogen uptake. The hydrogen permeation method is commonly applied to testing and qualification steel in response to hydrogen atom diffusion. Cyclic voltammetry (CV) has recently been proposed because it is a more straightforward method than permeation. A comprehensive study was conducted to investigate whether these two methods are comparable. A model alloy of SA 210 grade was studied. The study involved preparing specimens with varying microstructures through different heat treatments. Subsequently, metallographic analysis was conducted on each microstructural variation, followed by mechanical testing to evaluate the changes obtained before and after the hydrogen absorption test. The CV method consisted of three steps: CV before H absorption to search for a reference voltammogram, H charging, and CV after H absorption to determine the after-charge voltammogram. Electrochemical hydrogen permeation tests were performed in a Devanathan–Stachursky double cell. A comparison of the CV and permeation methods revealed that they show pretty similar results in evaluating the interaction between steel and hydrogen. Permeation methods provide quantitative results, while CV offers more qualitative insights. Both methods show that the quenched steel has the slowest hydrogen diffusion rate compared with those in normalized and base material conditions.

Methodological Features of the Study of Hydrogen Permeation Through a Steel Membrane from an Acid Environment

A Review for Consistent Analysis of Hydrogen Permeability through Dense Metallic Membranes

Hydrogen Economy vs. Hydrogen Embrittlement: Indirect Electrochemical Determination of Hydrogen Diffusion in Steel

INVESTIGATION OF HYDROGEN DIFFUSION CHARACTERISTICS OF THE HEAT AFFECTED ZONE OF 2.25CR-1MO-0.25V STEEL BY AN ELECTROCHEMICAL PERMEATION METHOD

Simulation of the Hydrogen Permeation Behavior of X80 Pipeline Steels in H<sub>2</sub>S Saturated Environment by Cathodic-Charging Method

Evaluation of Hydrogen Permeation into High-Strength Steel during Corrosion in Different Marine Corrosion Zones

Methodology of the electrochemical hydrogen permeation test: A parametric evaluation

Experimental comparison of gaseous and electrochemical hydrogen charging in X65 pipeline steel using the permeation technique

Control of electrochemical parameters for hydrogen permeation of CLF-1 steel

Modelling of hydrogen diffusion in a steel containing micro-porosity. Application to the permeation experiment

Analysis of hydrogen diffusion in the three stage electro-permeation test

Effect of microstructure on hydrogen uptake in SA 210 grade A1 steel studied using cyclic voltammetry and hydrogen permeation method

Hydrogen Insertion into Complex-Phase High-Strength Steel during Atmospheric Corrosion at Low Relative Humidity

The Investigation of H2S Corrosion of 16MnR Steel and the Rule of Hydrogen Permeation

Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels

Study on the Hydrogen Permeation Through Zinc Electrodeposit

DIFFUSIVITY OF HYDROGEN IN STEELS AT LOW TEMPERATURES

Corrosion-Mechanical Properties and Susceptibility to Hydrogenetaion of Pipe Steel in the Presence of Carbon Dioxide Gas and Hydrogen Sulphide in Environment

Studies on the Preparation of Pd/Alumina/Porous Stainless Steel Membranes for Hydrogen Separation

Numerical Simulation of Hydrogen Permeation in Steels