Visible-light-promoted thiocyanation of sp 2 C–H bonds over heterogeneous graphitic carbon nitrides

Wei Chen,Tingzhen Li,Xinwen Peng

DOI: https://doi.org/10.1039/d1nj00532d

IF: 3.3

2021-01-01

New Journal of Chemistry

Abstract:Mesoporous graphitic carbon nitride (mpg-C 3 N 4 ) is developed as a practical heterogeneous photocatalyst for C–S bond formation.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Visible-light-promoted Thiocyanation of Sp2 C–H Bonds over Heterogeneous Graphitic Carbon Nitrides

Wei Chen,Tingzhen Li,Xinwen Peng

DOI: https://doi.org/10.1039/d1nj00532d

IF: 3.3

2021-01-01

New Journal of Chemistry

Abstract:Mesoporous graphitic carbon nitride (mpg-C3N4) is developed as a practical heterogeneous photocatalyst for C–S bond formation.
Graphitic carbon nitride/Cu2O heterojunctions: Preparation, characterization, and enhanced photocatalytic activity under visible light

Yanlong Tian,Binbin Chang,Jie Fu,Baocheng Zhou,Jiyang Liu,Fengna Xi,Xiaoping Dong

DOI: https://doi.org/10.1016/j.jssc.2014.01.011

IF: 3.3

2014-01-01

Journal of Solid State Chemistry

Abstract:As a metal-free semiconductor material, graphitic carbon nitride (C3N4), the high recombination rate of photogenerated charges and insufficient sunlight absorption limit its solar-based photocatalytic activity. Here, we reported the heterojunctions of C3N4–Cu2O with a p–n junction structure, which was synthesized by a hydrothermal method. The HR-TEM result revealed an intimate interface between C3N4 and Cu2O in the heterojunction, and UV–vis diffuse reflection spectra showed their extended spectral response in the visible region compared with pure C3N4. These excellent structural and spectral properties, as well as p–n junction structures, endowed the C3N4–Cu2O heterojunctions with enhanced photocatalytic activities. The possible photocatalytic mechanism that photogenerated holes as the mainly oxidant species in photocatalysis was proposed base on the trapping experiments.
Template-free Preparation of Porous g-C3N4 for Visible-light Catalysis

Feng Yu,Shen Jianchao,Cai Qifeng,Shen Qianhong

2016-01-01

Rare Metal Materials and Engineering

Abstract:A novel and facile template-free method was presented to fabricate a porous g-C3N4 (graphite-like carbon nitaide) by combining ultrasonic treatment with hydrothermal modification in the presence of sulfuric acid. Particle size analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and UV-vis diffuse reflectance spectra (DRS) were adopted to analyze its structure, morphology and properties. And the photocatalytic activities of the as-prepared samples were also evaluated by decomposing methyl orange (MO) and Rhodamine B (RhB) in aqueous solution under visible light illumination. The results show that combining ultrasonic treatment with hydrothermal modification is favorable to improve the porosity of g-C3N4, which can increase the ability to absorb pollutants and inhibit the recombination of photo-generated carriers, thereby enhancing the visible-light photocatalytic property.
Visible light-induced recyclable g-C 3 N 4 catalyzed thiocyanation of C(sp 2 )–H bonds in sustainable solvents

Fan-Lin Zeng,Hu-Lin Zhu,Xiao-Lan Chen,Ling-Bo Qu,Bing Yu

DOI: https://doi.org/10.1039/d1gc00938a

IF: 9.8

2021-01-01

Green Chemistry

Abstract:A metal-free photocatalytic strategy for the preparation of thiocyanated heterocycles from inexpensive NH 4 SCN has been developed using carbon nitride (g-C 3 N 4 ) as a general heterogeneous catalyst.

chemistry, multidisciplinary,green & sustainable science & technology
Constructing supramolecular self-assembled porous g-C3N4 nanosheets containing thiophene-groups for excellent photocatalytic performance under visible light

Rongping Xu,Jinlong Li,Guozhe Sui,Yan Zhuang,Dongxuan Guo,Ze Luo,Shuang Liang,Hong Yao,Chao Wang,Shijie Chen

DOI: https://doi.org/10.1016/j.apsusc.2021.152064

IF: 6.7

2022-03-01

Applied Surface Science

Abstract:Enhancing catalytic visible light capture and light utilization efficiency represent an important objective in graphitic carbon nitride (g-C3N4) research. Herein, a novel sulfur-containing thiophene-grafted g-C3N4 porous nanosheets (CM-CN-Th A) prepared via co-thermal polycondensation of supramolecular self-assembled precursors (CM) and 3-thiophenecarboxylic acid (Th A) is reported. The introduction of thiophene groups improved the optical properties of the synthesized catalyst in the visible range, enhanced charge carrier separation, and suppressed e-/h+ pair complexation compared to pristine g-C3N4. Various analytical techniques were employed to characterize the structure, morphology, and electrical and optical features of the synthesized catalysts. In the removal of rhodamine B (Rh B) from aqueous media, CM-CN-Th A displayed favorable photocatalytic activity (rate constant k of 0.0360 min−1) under visible light illumination (λ > 420 nm), with photocatalytic removal effieciency of 89.22%, mineralization efficiency of 45.34%; this value was maintained after five cycles. The catalyst also delivers superior photocatalytic activity for methyl orange (MO), methylene blue (MB), and crystalline violet (CV) degradation, demonstrating wide applicability for dye wastewater treatment. In addition, a possible photocatalytic mechanism of CM-CN-Th A is proposed by analyzing the experimental results of active species capture. This work offers a novel approach for the photodegradation of dye wastewater.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Shining bright: B@S-codoped graphitic carbon nitride nanorods illuminate enhanced catalytic C-N bond formation under visible-light

Neha Chaurasia,Rajesh K. Yadav,Shaifali Mishra,Rehana Shahin,Satyam Singh,Navneet K. Gupta,S.K. Pandey,Mantesh Kumari Yadav,Jin-OoK Baeg,Ahmad J. Obaidullah,Krishna Kumar Yadav

DOI: https://doi.org/10.1016/j.flatc.2024.100669

IF: 5.829

2024-05-08

FlatChem

Abstract:Graphitic carbon nitride as a photocatalyst seeking attention nowadays, due to its thermal stability, band structure, and chemical properties. Herein, we reported a boron sulfur co-doped graphitic carbon nitride (B@S-g-C 3 N 4 ) photocatalyst synthesized by a one-pot thermal polycondensation mechanism. However, it was observed that due to co-doping in native carbon nitride structure the photocatalytic behavior and the band structure enhanced which was capable of fascinating the demand of organic transformations i.e. photocatalytic and charge transfer capability. The synthesized B@S-g-C 3 N 4 photocatalyst was characterized by UV–vis DRS, FT-IR, XRD, SEM, EDX, HR-TEM, XPS and electrochemical properties. In addition, the synthesized B@S-g-C 3 N 4 photocatalyst is a metal-free carbon nitride photocatalyst proven to be highly effective in performing organic transformations (conversion yield 98 %) like C-N bond formation under visible light source.

materials science, multidisciplinary,chemistry, physical
Graphitic Carbon Nitride as a Photocatalyst for Decarboxylative C(sp2)–C(sp3) Couplings via Nickel Catalysis

Florian Lukas,Michael T. Findlay,Méritxell Fillols,Johanna Templ,Elia Savino,Benjamin Martin,Simon Allmendinger,Markus Furegati,Timothy Noel

DOI: https://doi.org/10.1002/anie.202405902

2024-05-30

Angewandte Chemie International Edition

Abstract:The development of robust and reliable methods for the construction of C(sp2)–C(sp3) bonds is vital for accessing an increased array of structurally diverse scaffolds in drug discovery and development campaigns. While significant advances towards this goal have been achieved using metallaphotoredox chemistry, many of these methods utilise photocatalysts based on precious-metals due to their efficient redox processes and tuneable properties. However, due to the cost, scarcity, and toxicity of these metals, the search for suitable replacements should be a priority. Here, we show the use of commercially available heterogeneous semiconductor graphitic carbon nitride (gCN) as a photocatalyst, combined with nickel catalysis, for the cross-coupling between aryl halide and carboxylic acid coupling partners. gCN has been shown to engage in single-electron-transfer (SET) and energy-transfer (EnT) processes for the formation of C–X bonds, and in this manuscript we overcome previous limitations to furnish C–C over C–O bonds using carboxylic acids. A broad scope of both aryl halides and carboxylic acids is presented, and recycling of the photocatalyst demonstrated. The mechanism of the reaction is also investigated.

chemistry, multidisciplinary
Synthesis and Photocatalytic Activity of Mesoporous G-C3n4/mos2 Hybrid Catalysts

Yirong Qi,Qinghua Liang,Ruitao Lv,Wanci Shen,Feiyu Kang,Zheng-Hong Huang

DOI: https://doi.org/10.1098/rsos.180187

IF: 3.5

2018-01-01

Royal Society Open Science

Abstract:The key to solving environmental and energy issues through photocatalytic technology requires highly efficient, stable and eco-friendly photocatalysts. Graphitic carbon nitride (g-C3N4) is one of the most promising candidates except for its limited photoactivity. In this work, a facile and scalable one-step method is developed to fabricate an efficient heterostructural g-C3N4 photocatalyst in situ coupled with MoS2. The strong coupling effect between the MoS2 nanosheets and g-C3N4 scaffold, numerous mesopores and enlarged specific surface area helped form an effective heterojunction. As such, the photocatalytic activity of the g-C3N4/MoS2 is more than three times higher than that of the pure g-C3N4 in the degradation of RhB under visible light irradiation. Improvement of g-C3N4/MoS2 photocatalytic performance is mainly ascribed to the effective suppression of the recombination of charge carriers.
One-step Preparation of Sulfur-Doped Porous G-C3n4 for Enhanced Visible Light Photocatalytic Performance.

Xin Xiao,Yihui Wang,Qiu Bo,Xingyou Xu,Dongen Zhang

DOI: https://doi.org/10.1039/d0dt00299b

IF: 4

2020-01-01

Dalton Transactions

Abstract:Nonmetal doping is a convenient method to adjust the visible light photocatalytic activity of graphitic carbon nitride (g-C3N4). Herein, highly active sulfur-doped porous g-C3N4 (C3N4-S) was successfully prepared by one-step calcination using thiourea and melamine as the precursors. C3N4-S exhibited excellent photocatalytic performance for the degradation of Rhodamine B (RhB) under visible light irradiation. C3N4-S not only promoted the separation of photogenerated electron-hole pairs, but also enhanced electron transfer, resulting in a great improvement in the photocatalytic efficiency. Based on capture experiments and DMPO spin-trapping ESR spectra, the superoxide radical (˙O2-) was proved to be the predominant active species and the possible photocatalytic mechanism of C3N4-S was proposed. The photocatalytic mechanism of RhB degradation over C3N4-S was further explored using high-resolution mass spectra (HRMS).
Oxygen-doped carbon nitride for enhanced photocatalytic activity in visible-light-induced decarboxylative annulation reactions

Anzai Shi,Kai Sun,Yanxuan Wu,Panjie Xiang,Igor B. Krylov,Alexander O. Terent''ev,Xiaolan Chen,Bing Yu

DOI: https://doi.org/10.1016/j.jcat.2022.09.027

IF: 7.3

2022-11-01

Journal of Catalysis

Abstract:An oxygen atom-doped modification strategy was developed to improve the photocatalytic activity of graphite-like carbon nitride (g-C3N4), which was successfully employed as a reusable photocatalyst in the cascade annulation reaction of N-sulfonyl ketimines with N-aryl glycines. The oxygen-doped g-C3N4 (denoted as OCN) displays better catalytic performance than bulk g-C3N4 under visible light irradiation. Moreover, this heterogeneous photocatalyst can be easily recovered and recycled at least 5 times without loss of activity. Such a strategy would offer an expansion for the development of novel heterogeneous photocatalysts and their applications in organic synthesis.

chemistry, physical,engineering, chemical
Graphitic carbon nitride as a photocatalyst for decarboxylative C(sp2)-C(sp3) couplings via nickel catalysis

Timothy Noel,Florian Lukas,Michael Findlay,Méritxell Fillols,Johanna Templ,Elia Savino,Benjamin Martin,Simon Allmendinger,Markus Furegati

DOI: https://doi.org/10.26434/chemrxiv-2024-b7kv6

2024-03-26

Abstract:The development of robust and reliable methods for the construction of C(sp2)–C(sp3) bonds is vital for accessing an increased array of structurally diverse scaffolds in drug discovery and development campaigns. While significant advances towards this goal have been achieved using metallaphotoredox chemistry, many of these methods utilise photocatalysts based on precious-metals due to their efficient redox processes and tuneable properties. However, due to the cost, scarcity, and toxicity of these metals, the search for suitable replacements should be a priority. Here, we show the use of commercially available heterogeneous semiconductor graphitic carbon nitride (g-C3N4) as a photocatalyst, combined with nickel catalysis, for the cross-coupling between aryl halide and carboxylic acid coupling partners. g-C3N4 has been shown to engage in single-electron-transfer (SET) and energy-transfer (ET) processes for the formation of C–X bonds, and in this manuscript we overcome previous limitations to furnish C–C over C–O bonds using carboxylic acids. A broad scope of both aryl halides and carboxylic acids is presented, and recycling of the photocatalyst demonstrated. The mechanism of the reaction is also investigated.

Chemistry
One-pot synthesis of porous g-C3N4 nanosheets with enhanced photocatalytic activity under visible light

Cunlu Wang,Guangwei Zhang,Han Zhang,Zihao Li,Yeqian Wen

DOI: https://doi.org/10.1016/j.diamond.2021.108416

IF: 3.806

2021-06-01

Diamond and Related Materials

Abstract:Porous graphitic carbon nitride nanosheets (PMCNS) photocatalyst with a specific surface area of 92.75 m2 g−1 was prepared by ammonium carbonate guide structure in a one-pot strategy. Compared with bulk graphitic carbon nitride (MCN), the pores in the PMCNS formed by curling and sealing of the lamella provide more active sites, which promote charge separation and transfer, and inhibit the recombination of photoexcited electron and hole pairs. To confirm our strategy, the photocatalytic degradation of rhodamine B (RhB) and hydrogen evolution ability of PMCNS under visible light were performed, and a significant enhancement was observed, the efficiencies are 12.8 and 3.8 times that of MCN, respectively. This work provides an approach for reconstruction of graphitic carbon nitride (g-C3N4) structure to improve the photocatalytic oxidation and reduction capabilities under visible light.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Insights into the Role of C-S-C Bond in C 3 N 5 for Photocatalytic NO Deep Oxidation: Experimental and DFT Exploration

Junlei Zhang,Zhi Li,Bin Liu,Mengshan Chen,Yingtang Zhou,Mingshan Zhu

DOI: https://doi.org/10.1016/j.apcatb.2023.122522

2023-02-26

Abstract:Non-stoichiometric polymer carbon nitride of C 3 N 5 is becoming an important visible-light-type catalyst due to the narrow bandgap, non-toxicity, and thermal stability. Here, we report a sulfur doping strategy for upgrading the photogenerated carriers' dynamics of C 3 N 5 . Studies on the transient diffuse reflectance spectra prove that the lifetime of photogenerated carriers of sulfur-doped C 3 N 5 (S-C 3 N 5 ) increases 61.6%. The widened visible-light responsive range and enhanced structural defects are also confirmed by UV-vis DRS and ESR characterizations. DFT calculations also verify the better NO adsorption and activation as well as give an insight into the mechanism of NO conversion from the molecule level. Such unique properties endow S-C 3 N 5 with a 4.9- and 5.1-fold increase in photocatalytic NO removal efficiency and rate respectively compared to C 3 N 5 . In-situ DRIFTS tests demonstrate the excellent NO deep-oxidation capability of S-C 3 N 5 . Ten-cycle NO removal experiments prove its reusability and durability.

chemistry, physical,engineering, chemical, environmental
Fabrication of a Carbonized Cellulose Nanofibrils/Ti 3 C 2 T x MXene/g-C 3 N 4 Heterojunction for Visible-Light-Driven Photocatalysis

Wenyue Zu,Chuang Jiang,Wei Liu,Qingxi Hou,Xingxiang Ji

DOI: https://doi.org/10.1021/acs.langmuir.2c01818

IF: 3.9

2022-10-21

Langmuir

Abstract:Photocatalytic degrading pollutants driven by visible-light irradiation has attracted tremendous attention. One strategy of preparing carbonized cellulose nanofibrils/Ti(3)C(2)T(x) MXene/g-C(3)N(4) (CMCN) as a photocatalyst was developed. The as-prepared CMCN was comprehensively characterized in terms of the chemical composition, chemical and crystal structure, morphology, and photoelectrochemical properties. The CMCN was explored as a photocatalyst and exhibited good photocatalytic performance...

chemistry, multidisciplinary, physical,materials science
Sulfur- and Strontium-Doped Graphitic Carbon Nitride for Efficient Photocatalytic Hydrogen Evolution

Feng Liu,Wencheng Li,Lu Wang,Xi Rao,Shaohui Zheng,Yongping Zhang

DOI: https://doi.org/10.1021/acsaem.2c03376

IF: 6.4

2022-12-01

ACS Applied Energy Materials

Abstract:Doping metallic and nonmetallic elements in the graphitic carbon nitride (g-C3N4) molecular layer to tune its band structure is an important strategy for improving its photocatalytic activity. Herein, sulfur- and strontium-doped g-C3N4 catalysts are synthesized by calcining the mixture of urea, 2-thiobarbituric acid, and strontium chloride hexahydrate at elevated temperature. The optimal hydrogen production rate of 6Sr-SCN (SCN, sulfur-doped graphitic carbon nitride) reaches 13.9 μmol/h, about 6.6 times that of pure g-C3N4, abridged as CN, under visible light irradiation with λ ≥ 420 nm. An experimental study and theoretical simulation demonstrate that S and Sr doping narrows the band gap, forms an intraplane heterojunction, extends the harvest in the visible light range and the transport and separation efficiency of photogenerated carriers, and increases molecular buckling and specific surface area as well. All these factors are synergistically combined to improve the photocatalytic performance of g-C3N4.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Facile transformation of low cost thiourea into nitrogen-rich graphitic carbon nitride nanocatalyst with high visible light photocatalytic performance

fan dong,yanjuan sun,liwen wu,min fu,zhongbiao wu

DOI: https://doi.org/10.1039/c2cy20049j

IF: 6.177

2012-01-01

Catalysis Science & Technology

Abstract:Polymeric nitrogen-rich graphitic carbon nitride (g-C3N4-T) nanocatalyst was synthesized for the first time with a facile approach by directly treating low cost thiourea in air. The g-C3N4-T demonstrated much higher visible light photocatalytic activity than that of g-C3N4 obtained from toxic dicyandiamide, C-doped TiO2 and P25.
Copper Loaded Nitrogen-Rich Mesoporous Carbon Nitride as a Highly Efficient Photocatalyst for Selective Oxidative Cleavage of C(sp3)-C(sp3) Bonds at Room Temperature under Visible Light

Jiabao Guo,Yizhuo Zhao,Peng Wang,Yang Song,Yifei Shao,Li Zhu,Xiaoquan Yao

DOI: https://doi.org/10.1039/d2ta00660j

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:Catalytic selective cleavage reaction of C(sp3)-C(sp3) bond has received little attention, despite its importance in organic synthesis and biochemistry. Herein, a novel copper loaded nitrogen-rich mesoporous carbon nitride material was...

materials science, multidisciplinary,chemistry, physical,energy & fuels
Cyano-rich mesoporous carbon nitride nanospheres for visible-light-driven photocatalytic degradation of pollutants

Chang-Bin Chen,Chen-Xuan Li,Ying-Jie Zhang,Yun-Jie Wang,Jia-Yuan Lu,Hou-Qi Liu,Wen-Wei Li

DOI: https://doi.org/10.1039/C8EN00908B

2018-01-01

Abstract:Visible-light-responsive photocatalysis offers exciting opportunities for sustainable environmental pollution control, but the unsatisfactory photoactivity of the existing photocatalysts impedes their practical application. Here, we fabricated a high-activity mesoporous carbon nitride nanosphere (MCNS) photocatalyst by a hard template synthesis method through incomplete polycondensation of the cyanamide precursors during thermal polymerization. The MCNS showed a unique nanosphere structure with a larger specific surface area and possessed more abundant cyano groups than two other graphitic carbon nitride (g-C3N4) materials (i.e., nanosheet and bulk g-C3N4). Experimental results and theoretical calculations indicate important roles of the cyano groups in narrowing the catalyst band gap to favor visible light absorption and accelerating the separation of the electron–hole pairs. With such superior surface properties and improved charge separation efficiency, the MCNS exhibited 14.7 times higher photocatalytic activity for bisphenol A (BPA) degradation than the bulk g-C3N4. The MCNS also showed good stability during repeated use. Therefore, the as-prepared MCNS has great potential for visible-light-responsive photocatalysis in environmental remediation and other photocatalytic applications.
Heterogeneous Metallaphotocatalytic C(sp 2 )-C(sp 3 ) Cross-Coupling Reactions with Integrated Bipyridyl-Ni(II)-Carbon Nitride

Xiao Dan,Qian Yang,Liuzhuang Xing,Yurong Tang,Wentao Wang,Yunfei Cai

DOI: https://doi.org/10.1021/acs.orglett.3c01384

IF: 5.2

2023-05-18

Organic Letters

Abstract:A fully heterogeneous metallaphotocatalytic C-C cross-coupling of aryl/vinyl halides with alkyl/allyltrifluoroborates has been developed by employing integrated bipyridyl-Ni(II)-carbon nitride as a stable and recyclable bifunctional catalyst. This visible-light-mediated heterogeneous protocol allows for the sustainable synthesis of diverse valuable diarylmethanes and allylarenes in high efficiency.

chemistry, organic
Metal-free g-C 3 N 4 nanosheets as a highly visible-light-active photocatalyst for thiol–ene reactions

Shouren Zhang,Wenjing Yi,Yanzhen Guo,Ruoqi Ai,Zhichao Yuan,Baocheng Yang,Jianfang Wang

DOI: https://doi.org/10.1039/d1nr00453k

IF: 6.7

2021-01-01

Nanoscale

Abstract:Graphitic carbon nitride nanosheets are synthesized as photocatalysts for thiol–ene reactions. They are metal-free, highly visible-light active, recyclable and scalable.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

Visible-light-promoted thiocyanation of sp 2 C–H bonds over heterogeneous graphitic carbon nitrides

Visible-light-promoted Thiocyanation of Sp2 C–H Bonds over Heterogeneous Graphitic Carbon Nitrides

Graphitic carbon nitride/Cu2O heterojunctions: Preparation, characterization, and enhanced photocatalytic activity under visible light

Template-free Preparation of Porous g-C3N4 for Visible-light Catalysis

Visible light-induced recyclable g-C 3 N 4 catalyzed thiocyanation of C(sp 2 )–H bonds in sustainable solvents

Constructing supramolecular self-assembled porous g-C3N4 nanosheets containing thiophene-groups for excellent photocatalytic performance under visible light

Shining bright: B@S-codoped graphitic carbon nitride nanorods illuminate enhanced catalytic C-N bond formation under visible-light

Graphitic Carbon Nitride as a Photocatalyst for Decarboxylative C(sp2)–C(sp3) Couplings via Nickel Catalysis

Synthesis and Photocatalytic Activity of Mesoporous G-C3n4/mos2 Hybrid Catalysts

One-step Preparation of Sulfur-Doped Porous G-C3n4 for Enhanced Visible Light Photocatalytic Performance.

Oxygen-doped carbon nitride for enhanced photocatalytic activity in visible-light-induced decarboxylative annulation reactions

Graphitic carbon nitride as a photocatalyst for decarboxylative C(sp2)-C(sp3) couplings via nickel catalysis

One-pot synthesis of porous g-C3N4 nanosheets with enhanced photocatalytic activity under visible light

Insights into the Role of C-S-C Bond in C 3 N 5 for Photocatalytic NO Deep Oxidation: Experimental and DFT Exploration

Fabrication of a Carbonized Cellulose Nanofibrils/Ti 3 C 2 T x MXene/g-C 3 N 4 Heterojunction for Visible-Light-Driven Photocatalysis

Sulfur- and Strontium-Doped Graphitic Carbon Nitride for Efficient Photocatalytic Hydrogen Evolution

Facile transformation of low cost thiourea into nitrogen-rich graphitic carbon nitride nanocatalyst with high visible light photocatalytic performance

Copper Loaded Nitrogen-Rich Mesoporous Carbon Nitride as a Highly Efficient Photocatalyst for Selective Oxidative Cleavage of C(sp3)-C(sp3) Bonds at Room Temperature under Visible Light

Cyano-rich mesoporous carbon nitride nanospheres for visible-light-driven photocatalytic degradation of pollutants

Heterogeneous Metallaphotocatalytic C(sp 2 )-C(sp 3 ) Cross-Coupling Reactions with Integrated Bipyridyl-Ni(II)-Carbon Nitride

Metal-free g-C 3 N 4 nanosheets as a highly visible-light-active photocatalyst for thiol–ene reactions