Abstract:Performance degradation of lithium-ion batteries (LIBs) from in-service abuse was analyzed using novel dynamic abuse tests and sensor-based in-situ monitoring of battery state of health (SOH). The relation between dynamic impact and structure changes of LiCoO2 (LCO) electrode was analyzed through a nano-impact test directly applied to the electrode and Raman imaging. After the electrode structure damage induced by the dynamic loading was analyzed, the performance of the LIBs with the abused electrodes was evaluated to establish the relation between the number of impact cycles and LIB performance degradation. The mechanism of impact related LIB capacity decrease was analyzed, and the capacity change can be predicted based on the impact abuse history using this approach. In order to provide more detailed information on the battery performance degradation caused by the in-service dynamic loads, a dynamic aging testing platform was designed to simulate in-service vibration and impact experienced by the LIBs. Based on the lessons learned, a sensor network was constructed to provide a comprehensive in-situ evaluation of the SOH of commercial batteries. Mechanisms of LIB capacity fade, temperature increase, and cell deformation from cycling in representative dynamic environments were analyzed and correlated with theoretical predictions. Difference between the aging of a battery pack and that of a single cell was also investigated, which presented the influence of current imbalance on the SOH decay of battery packs. SEM imaging, Raman imaging, and electrochemical impedance spectroscopy (EIS) analysis were also applied to support the sensor network measurements. In order to provide an early detection of catastrophic LIB failure such as thermal runaway, an internal resistance temperature detector (RTD) based electrode temperature monitoring approach was developed. By embedding the RTD into LIBs with 3D printing technique, electrode temperature can be collected during ordinary cycling and electrical abuse of LIBs, such as external short circuit and overcharge. The internal RTD presented high measuring efficiency, while there was no interference between the sensor measurement and battery operation. The internal RTD detected the short circuit event and overcharge failure prior of time: the efficiency of the internal RTD was 6-10 times higher than the external RTD in the short circuit test. This provided the chance for early detection and prevention of catastrophic LIB failures. Besides, with the detailed information on electrode temperature evolution during LIB thermal runaway available, the internal RTD also provided the chance to enhance the understanding of the thermal runaway mechanism.

Influence of different state of charge on fire characteristics of single 32,650 lithium-ion battery in long-narrow confined space

Refined Study on Lithium Ion Battery Combustion in Open Space and a Combustion Chamber

Fire behavior of lithium-ion battery with different states of charge induced by high incident heat fluxes

Assessment on fire risk of lithium-ion battery packs with different sizes and states of charge by cone calorimeter

Effect of States of Charge on the Burning Behaviors of Lithium Ion Batteries

Experimental Study on the Thermal Runaway and Fire Behavior of LiNi0.8Co0.1Mn0.1O2 Battery in Open and Confined Spaces

Experimental Study on Thermal Runaway and Fire Behaviors of Large Format Lithium Iron Phosphate Battery

Experimental study on flame morphology, ceiling temperature and carbon monoxide generation characteristic of prismatic lithium iron phosphate battery fires with different states of charge in a tunnel

Study on the Combustion Behaviors and Thermal Stability of Aging Lithium-Ion Batteries with Different States of Charge at Low Pressure

Understanding the Influence of the Confined Cabinet on Thermal Runaway of Large Format Batteries with Different Chemistries: A Comparison and Safety Assessment Study

Experimental Study on Effect of State of Charge on Thermal Runaway Characteristics of Commercial Large-Format NCM811 Lithium-Ion Battery

Fire Characteristics of Lithium-ion Battery According to the State of Charge in an Accelerating Rate Calorimeter

Thermal runaway and fire behavior investigation of lithium ion batteries using modified cone calorimeter

EXAMINATION OF LITHIUM-ION BATTERY PERFORMANCE DEGRADATION UNDER DYNAMIC ENVIRONMENT AND EARLY DETECTION OF THERMAL RUNAWAY WITH INTERNAL SENSOR MEASUREMENT

Environmental Pressure Effects on Thermal Runaway and Fire Behaviors of Lithium-Ion Battery with Different Cathodes and State of Charge

Experimental study on thermal runaway risk of 18650 lithium ion battery under side-heating condition

Experimental study on combustion behavior and fire extinguishing of lithium iron phosphate battery

Study on the effect of spacing on thermal runaway and smoke temperature of double 32,650 lithium iron phosphate batteries under a narrow and long constrained space

Understanding the combustion characteristics and establishing a safety evaluation technique based on the overcharged thermal runaway of lithium-ion batteries

Influencing factors of lithium-ion battery thermal runaway in confined space

Research on Thermal Runaway Process of 18650 Cylindrical Lithium-Ion Batteries with Different Cathodes Using Cone Calorimetry