Abstract:Numerical investigations and analyses are carried out particularly on the steady interactions of low enthalpy hypersonic 30-55-deg double wedge configuration at conditions similar to the experimental setup by Swantek & Austin. To achieve a steady solution, Re lower than those in the experiment are used. Three gas models, i.e., the perfect, equilibrium, and non-equilibrium gas models, are used to analyze the difference potentials that arise from the physical model. Grid convergence studies are first conducted at Ma=7 and Re=2.5e5/m. Subsequently, comprehensive numerical studies are carried out on the steady interactions and their evolution at Ma=7 and h0=2.1MJ/kg. Specifically: (a) The upper limits of Re are identified where the flows remain steady, and the corresponding interaction characteristics as well as differences in the three gas models are investigated. Notably, a quasi-normal shock wave is observed within the slip line passage in the case of the perfect gas model. (b) The flow characteristics of the three models, including the interaction pattern, geometric features of triple points, impingements, and separation zone, are studied and compared for Re=(4,3,2)e4/m. Differences primarily emerge between the results of the perfect gas model and the real gas model. Specifically, a transmitted shock reflecting above the separation zone is observed in the case of the perfect gas model. The effect of the gas model on temperature and specific heat ratio distributions, as well as the heat transfer and pressure coefficients over the wedge surface are investigated. The shock polar method is applied for comparison with computational results, while a 1D flow model is proposed to explain the occurrence of the quasi-normal shock wave. Finally, the effects of variations in Mach number and enthalpy are determined, by alternatively varying the two parameters around Ma=7 and h0=2.1MJ/kg at Re=4e4/m.

A numerical study of laminar/transitional shock–boundary layer interaction on a hypersonic double wedge using a modified -transition model

Application of simplified threeGequation transition model in hypersonic flow

Computation of Hypersonic Transitional Flows Over Cones Using Gas-Kinetic Scheme Coupled with the Turbulence Model

Effects of compressibility correction onγ-Reθ transition model

Numerical investigation of supersonic shock-wave/boundary-layer interaction in transitional and turbulent regime

A Modular RANS Approach for Modeling Hypersonic Flow Transition on an Air-Breathing Configuration

Modeling Of Supersonic/Hypersonic Boundary Layer Transition Using A Single-Point Approach

Transition Prediction in Hypersonic Regime on Complex Geometries with RANS-based Models

Hypersonic Shock Wave/Turbulent Boundary Layer Interaction over a Compression Ramp

Interaction Length Analysis of Hypersonic Shock–Boundary-Layer Interaction Including High-Enthalpy Effects

Hypersonic Boundary Layer Transition and Heat Loading

Modelling Flow Transition in a Hypersonic Boundary Layer with Reynolds-averaged Navier-Stokes Approach

Hypersonic Conical Shock-Wave/Turbulent-Boundary-Layer Interaction at High Reynolds Number

Effect of Leading-Edge Bluntness on Shockwave–Boundary-Layer Interaction in a Scramjet Intake

Numerical studies on steady interaction of low enthalpy hypersonic double wedge flows using different gas models

A Modular Rans Approach for Modeling Hypersonic Flow Transition on A Scramjet-Forebody Configuration

Effects of Wall Temperature on Hypersonic Impinging Shock-Wave/Turbulent-Boundary-Layer Interactions

Development of a Computational Fluid Dynamics Compatible Mathematical Model for Boundary Layer Transitional Flows in Low-Disturbance Environment

Numerical Investigation on Ultra-High-lift Low-Pressure Turbine Cascade Aerodynamics at Low Reynolds Numbers Using Transition-Based Turbulence Models

Reynolds-Averaged Numerical Simulations of Conical Shock-Wave/Boundary-Layer Interactions

Simulations of Compression Ramp Shock Wave/Turbulent Boundary Layer Interaction Controlled Via Steady Jets at High Reynolds Number