Abstract:Coconut oil (CO) has become one of the most important renewable raw materials for polyol synthesis due to its abundance and low price. However, the saturated chemical structure of CO limits its capability for functionalization. In this study, a novel reaction mechanism via the sequential glycerolysis and amidation of CO triglycerides produced an amine-based polyol (p-CDEA). The synthesized biopolyol has a relatively higher hydroxyl value of 361 mg KOH per g relative to previously reported CO-based polyols with values ranging from 270–333 mg KOH per g. This primary hydroxyl-rich p-CDEA was used directly as a sole B-side polyol component in a polyurethane-forming reaction, without further purification. Results showed that a high-performance poly(urethane-urea) (PUA) hybrid foam was successfully produced. It has a compressive strength of 226 kPa and thermal conductivity of 23.2 mW (m −1 K −1 ), classified as type 1 for a rigid structural sandwich panel core and type 2 for rigid thermal insulation foam applications according to ASTM standards. Fourier-transform infrared (FTIR) spectroscopy was performed to characterize the chemical features of the polyols and foams. Scanning electron microscopy (SEM) analysis was also performed to evaluate the morphological structures of the synthesized foams. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were conducted to investigate the foam's thermal characteristics. Thus far, this work is the first to report a novel and effective reaction mechanism for the synthesis of a highly functional CO-derived polyol and the first CO-based polyol with no petroleum-based replacement that may serve as raw material for rigid PUA foam production. PUA hybrid foams are potential insulation and structural materials. This study further provided a compelling case for enhanced sustainability of p-CDEA PUA hybrid foam against petroleum-based polyurethane.

Greener preparation of a flexible material based on macaw palm oil derivatives and CO 2

Bio-Based Polymer Developments from Tall Oil Fatty Acids by Exploiting Michael Addition

The Use of the Straightforward Diels-Alder Reaction for the Preparation of Monomers From Tung Oil and Itaconic Acid-Derived Precursors: Synthesis, Characterization, and Screening of Their Polymerization Reactions

Fatty acids based transparent polyurethane films and coatings

Bio-Based Polyurethane Composites from Macauba Kernel Oil: Part 1, Matrix Synthesis from Glycerol-Based Polyol

A novel reaction mechanism for the synthesis of coconut oil-derived biopolyol for rigid poly(urethane-urea) hybrid foam application

Environmentally friendly adhesives derived from glycerol-based polymers

Incorporation of Argan Shell Flour in a Biobased Polypropylene Matrix for the Development of High Environmentally Friendly Composites by Injection Molding

Preparation of the flexible soybean oil‐based material via [2 + 2] cycloaddition photo‐polymerization

Preparation and characterisation of polyvinyl alcohol/glycerol blends thin film for sustainable flexibility

Dibutyl Itaconate and Lauryl Methacrylate Copolymers by Emulsion Polymerization for Development of Sustainable Pressure-Sensitive Adhesives

Development of High-Performance Coconut Oil-Based Rigid Polyurethane-Urea Foam: A Novel Sequential Amidation and Prepolymerization Process

Environmentally friendly shape memory biofoams

Tailored Biobased Resins from Acrylated Vegetable Oils for Application in Wood Coatings

Design, fabrication and characterization of dynamic covalent polymer networks containing reversible Diels-Alder adducts derived from vegetable oil and furfural

Incorporation of renewable carbons via formamide reactivity for the production of novel biobased polymers

Improving the Barrier and Mechanical Properties of Paper Used for Packing Applications with Renewable Hydrophobic Coatings Derived from Camelina Oil

On the way to greener furanic-aliphatic poly(ester amide)s: Enzymatic polymerization in ionic liquid

Enzymatic Synthesis of a Diene Ester Monomer Derived from Renewable Resource

Synthesis of palm oil-based bio-polyol by thiol-ene reaction: Preliminary study of its potential as cationic waterborne polyurethane for coating application

Highly Stretchable Fully Biomass Autonomic Self-Healing Polyamide Elastomers and Their Foam for Selective Oil Absorption