Abstract:Eugenol, an abundant, naturally occurring phenolic compound, was converted into a thermoplastic polycarbonate by olefin metathesis followed by interfacial polymerization with triphosghene. This resulted in polymers with Mn ranging from 5300 – 12700 g mol-1 and an average glass transition temperature (Tg) of 82 °C. The polycarbonates were depolymerized via ethenolysis reactions under modest ethylene pressures (150 – 240 psi) in the presence of [Ru]-metathesis catalysts to yield a discrete monomer [bis(4-allyl-2-methoxyphenol) carbonate, compound 2]. 2 was then polymerized with a second generation Grubbs catalyst (M204) to produce a recycled polymer with Mn = 7500 g mol-1 and a Tg of 114 °C. The 32 °C increase in Tg was due to the isomerization of the allyl group to internal positions, which then allowed for the formation of stilbene and 3-carbon unsaturated linkages between aromatic groups. To expand the ethenolysis recycling approach to cross-linked networks, eugenol was converted into a cyanate ester (3), which was then thermally cyclotrimerized to generate 2,4,6-tris(4-allyl-2-methoxyphenoxy)-1,3,5-triazine (4), a monomer with a triazine core and three pendent aromatic rings with methoxy and allyl substituents. 4 was cross-linked via olefin metathesis (M204 catalyst) to generate a network with Mn = 8600 g mol-1 and a Tg of 180 °C. Similar to the polycarbonate, the polycyanurate was efficiently depolymerized in the presence of ethylene to regenerate 4. Compound 4 was then polymerized and depolymerized two additional times, demonstrating full circularity for the triazine monomer/network. The recycled networks exhibited similar Tgs (167–184 °C) and thermal stability compared to the virgin polymer. Overall, this work demonstrates that both thermoplastic and cross-linked networks can be readily prepared from eugenol and catalytically recycled under standard ethenolysis conditions. Unlike many conventional approaches, the recycled polymers described in this work exhibited no significant degradation in thermomechanical properties. This type of approach supports a circular bioeconomy and may help to reduce plastic waste and the accumulation of micro/nanoplastic particles in the environment.

Incorporation of renewable carbons via formamide reactivity for the production of novel biobased polymers

Polyester Platform with High Refractive Indices and Closed-Loop Recyclability from CO2, 1,3-Butadiene, and Thiols

Branched Diol Monomers from the Sequential Hydrogenation of Renewable Carboxylic Acids

The Use of the Straightforward Diels-Alder Reaction for the Preparation of Monomers From Tung Oil and Itaconic Acid-Derived Precursors: Synthesis, Characterization, and Screening of Their Polymerization Reactions

Facile Synthesis of a Novel Furanic Monomer and Its ADMET Polymerization toward Fully Renewable Functional Polymers

CO2 and Lignin‐Based Sustainable Polymers with Closed‐Loop Chemical Recycling

Eco-friendly Development of New Biodegradable and Renewable Polymers Based on Di(meth)Acrylated and Acrylamidated Monomers Derived from Limonene Dioxide

Enzymatic Synthesis of a Diene Ester Monomer Derived from Renewable Resource

Polymers from biomass: one pot two-step synthesis of furilydenepropanenitrile derivatives with MIL-100(Fe) catalyst

A New Life For Nitrile‐Butadiene Rubber: Co‐Harnessing Metathesis And Condensation For Reincorporation Into Bio‐Based Materials

Artificial synthesis of polyesters at ambient condition via consecutive CO2 electrolysis and fermentation

Covalent Adaptable Networks through Dynamic N, S-Acetal Chemistry: Toward Recyclable CO2-Based Thermosets

Zinc-Mediated Allylation-Lactonization One-Pot Reaction to Methylene Butyrolactones: Renewable Monomers for Sustainable Acrylic Polymers with Closed-Loop Recyclability

Monomers and Macromolecular Materials from Renewable Resources: State of the Art and Perspectives

Wholly biomass derivable sustainable polymers by ring-opening metathesis polymerisation of monomers obtained from furfuryl alcohol and itaconic anhydride

Monomer-Recyclable Polyesters From CO2 and 1,3-Butadiene

Reactive Processing of Furan-Based Monomers via Frontal Ring-Opening Metathesis Polymerization for High Performance Materials

Furandicarboxylate Polyesters: A Comprehensive ADMET Study of a Novel Class of Furan-Based α,ω-Diene Monomers

Highly Efficient Biobased Synthesis of Acrylic Acid

[Ru]-Catalyzed Olefin Metathesis and Ethenolysis for the Synthesis and Recycling of Bio-Based Polycarbonates and Polycyanurates

Efficient Synthesis of Polar Functionalized Polyolefins with High Biomass Content