Abstract:Maceral composition is one of the key factors affecting the liquefaction and gasification of coal, which has attracted extensive attention of researchers working on coal chemical industry. To elucidate the impact of vitrinite and inertinite in coal on pyrolysis products, vitrinite and inertinite were extracted from a single coal sample and mixed to create six samples with varying vitrinite/inertinite ratios. The samples were subjected to thermogravimetry coupled online with mass spectrometry (TG-MS) experiments, and the Fourier transform infrared spectrometry (FITR) experiment was used to determine the macromolecular structures before and after the TG-MS experiments. The results show that the maximum mass loss rate is proportional to the vitrinite content and inversely proportional to the inertinite content, and increased vitrinite content accelerates the pyrolysis process and shifts the pyrolysis peak to low temperatures. Based on FTIR experiments, the sample's CH2/CH3 content, representing the length of aliphatic side chains, decreases significantly after pyrolysis, and the greater the loss of CH2/CH3, the greater the intensity of organic molecule production, indicating that aliphatic side chains are likely to yield organic molecule products. The aromatic degree (I) of samples rises sharply and steadily with increasing inertinite content. After high-temperature pyrolysis, the polycondensation degree of aromatic rings (DOC) and relative abundance of aromatic and aliphatic hydrogen (Har/Hal) within the sample increased significantly, indicating the thermal degradation rate of aromatic hydrogen content is much lower than that of aliphatic hydrogen. When the pyrolysis temperature is lower than 400 °C, the higher the inertinite content, the easier it is to produce CO2, whereas an increase in vitrinite leads to an increase in CO production. At this stage, the "-C-O-" functional group is pyrolyzed to produce CO and CO2. When the temperature exceeds 400 °C, the CO2 output intensity of vitrinite-rich samples is much higher than that of inertinite-rich samples, while the CO output intensity of vitrinite-rich samples is lower, and the higher the vitrinite content, the higher the peak temperature of CO gas production of samples, indicating that when the temperature exceeds 400 °C, the increase of vitrinite inhibits CO production and promotes CO2 production. At this stage, the reduction of each sample's "-C-O-" functional group after pyrolysis is positively correlated with the maximum CO gas production intensity, and the reduction of each sample's "-C=O" functional group after pyrolysis is positively correlated with the maximum CO2 gas production intensity. As a result, the "-C-O-" functional group is more likely to produce CO, whereas the "-C=O" functional group is more likely to be pyrolyzed to CO2. Hydrogen is primarily produced during the polycondensation and aromatization processes, and its production is proportional to the dynamic DOC values after pyrolysis. The higher the I value after pyrolysis, the lower the maximum gas production peak intensity of CH4 and C2H6, which indicates that increasing the aromatic proportion is detrimental to CH4 and C2H6 production. This work is expected to provide theoretical support of the liquefaction and gasification of coal with different vitrinite/inertinite ratios.

TG-MS Study on Pyrolysis Behavior of Shenmu Coal Macerals

Pyrolysis behaviors and product distribution of Shenmu coal at high heating rate: A study using TG-FTIR and Py-GC/MS

PYROLYSIS STUDIES ON COAL MACERALS USING DTA-GC,13C-NMR AND SEM TECHNIQUES

Thermogravimetric study of the kinetics and characteristics of the pyrolysis of pulverized coal

Characteristic Study of Shenmu Bituminous Coal Combustion with Online TG-MS-FTIR

Pyrolysis characteristics of macerals separated from a single coal and their artificial mixture

Study on combustion characteristics of four Chinese coal macerals by means of thermogravimetry

Evolution of structure and pyrolysis behavior of macerals and their interaction based on macro separation of a sub-bituminous coal

Characterization of pyrolysates from maceral components of Tarim coals in closed system experiments and implications to natural gas generation

Chemical bond dissociation insights into organic macerals pyrolysis of Qinghua bituminous coal: Vitrinite vs inertinite

Study on the relationship between pyrolysis volatile products and structure of Shengli lignite using TG-FTIR-GC/MS

Gas Emissions from Blends of Bituminous Coal and Biomass Chars under Different Pyrolysis Conditions

In situ analytical pyrolysis of coal macerals and solid bitumens by laser micropyrolysis GC–MS

Insight into Carbon Structures and Pyrolysis Behaviors of Coal from the 13C CP/MAS NMR Spectra

Study on pyrolysis behavior of the coal fractions based on macro maceral separation

Kinetic characteristics and reactive behaviors of HSW vitrinite coal pyrolysis: A comprehensive analysis based on TG-MS experiments, kinetics models and ReaxFF MD simulations

Simulation Study of Shenmu Coal Pyrolysis by Gas Heat Carrier Based on a Moving Bed

Effects of Functional Groups in Coal with Different Vitrinite/Inertinite Ratios on Pyrolysis Products

Study on the Structure and Pyrolysis Characteristics of Chinese Western Coals

Pyrolysis mechanisms of coal extracts based on TG-FTIR and ReaxFF MD study

Studies on the Formation of HCN and NH3 During Coal Macerals Pyrolysis