Abstract:[Continuous mixing equipment is widely used in polymer processing. Typical continuous mixers include single screw and twin screw extruders. The flow field in these mixing devices is difficult to analyze due to the complex geometry. In this work, a fluid dynamics analysis package-FIDAP, using the finite element method, was implemented to simulate the three dimensional, isothermal flow patterns in the region of conveying elements and shearing discs of a Leistritz intermeshing counterrotating twin screw extruder model LSM30.34, a 2{dollar}{bsol}sp{lcub}{bsol}prime{bsol}prime{rcub}{dollar} Welding Engineers tangential counterrotating twin screw extruder and the MCT section of a Multi-Cut Transfermix extrusion system. The rheology of the fluid was described by a power-law model. The problem of time dependent flow boundaries was solved by selecting a number of sequential geometries to represent a complete mixing cycle. The dispersive mixing in the region of conveying elements and shearing discs of the intermeshing counterrotating twin screw extruder was characterized in terms of shear stresses generated in the flow field and a parameter {dollar}{bsol}beta{dollar} quantifying the elongational flow components. The influence of screw rotational speed and axial pressure difference on these flow characteristics was analyzed. Comparisons of the flow characteristics in the regio n of conveying elements and in the shearing discs, and between corotating and counterrotating modes in the shearing discs were also presented. A framework was developed to evaluate distributive mixing efficiency in the intermeshing and tangential counterrotating twin screw extruders and in the Multi-Cut Transfermix. The dynamics of distributive mixing was studied numerically by means of tracking the evolution of particles originally gathered as clusters. The extent or goodness of mixing was characterized in terms of length stretch, pairwise correlation function and volume fraction of islands. The length stretch reflects the capability of the mixer to spread particles away from their neighbors initially present in the same cluster. The pairwise correlation function characterizes the global distribution of particles in the mixing region. The volume fraction of islands quantifies the regions void of minor component and provides a more local mixing analysis. This framework can then be used to differentiate among various operating conditions or various designs of the same type of equipment. Moreover, this framework can also be applied to other batch or continuous mixing equipment with some minor modifications]

Evaluation of Mixing Process in Batch Mixer Using CFD-DEM Simulation and Automatic Post-Processing Method

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Simulation and Visualization of Flow in A New Miniature Mixer for Multiphase Polymer Systems

Effects of Periodic and Non‐periodic Chaotic Mixing on Morphology Development of Immiscible Polymer Blends

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Numerical Study on Particle Mixing in a Double-Screw Conical Mixer

Analysis of Mixing Efficiency in Continuous Polymer Processing Equipment

Experimental and DEM Studies on the Particle Mixing Performance in Rotating Drums: Effect of Area Ratio

Detailed modeling and process design of an advanced continuous powder mixer

Dem Simulation of Particle Mixing for Optimizing the Overcoating Drum in Htr Fuel Fabrication

Research and Optimization Design of Mixing Characteristics of High-speed Centrifugal Mixer Based on DEM

CFD-PBM Simulation of Droplets Size Distribution in Rotor-Stator Mixing Devices

Mixing of spherical/cylindrical particles in a rotating drum: numerical modelling, characteristics, and mechanisms

Mass transfer mechanism of multiphase shear flows and interphase optimization solving method

Optimized Structure Design for Binary Particle Mixing in Rotating Drums Using a Combined DEM and Gaussian Process-Based Model

Evaluation of the mixing performance for one novel twin screw kneader with particle tracking

Mixing Ability Examination Of Three Different Rotor Cross Sections And Rotor Geometry Quantification With Pressurization Coefficient

Investigating the effects of material properties on the mixing dynamics of cohesive particles in a twin screw mixer using a discrete element method approach

Efficient DEM modeling of solid flavor particle mixing in a rotary drum

Fluid–Solid Mixing Transfer Mechanism and Flow Patterns of the Double-Layered Impeller Stirring Tank by the CFD-DEM Method