Abstract:Quality control is considered a critical aspect of plastic materials in the injection molding process. Two types of deformations occur during the injection molding process, namely, volumetric shrinkage and warpage. This study aims to optimize the warpage of the polyethylene terephthalate preform (PET) used for the packing of carbonated drinks. PET warpage results in an uneven distribution of material over the wall surface of the preform and causes variation in wall thickness. During the filling operation of carbonated drinks, the preforms are subjected to high pressure at the points where the wall thickness is at a minimum, which induces a high-stress concentration. Under high pressure, the preforms are ruptured at the points where the warpage is at a maximum (stress concentration area), causing wastage of the beverage as well as the preform. In this study, the Taguchi method and analysis of variance (ANOVA) are used to determine the most significant parameters to induce warpage during the molding process. Then, we optimize the process parameters in order to reduce warpage through a numerical approach using Solid Works Plastics. The result shows that the ambient temperature and melting temperature are the most critical parameters that contribute to the warpage, yielding 42.115% and 41.278%, respectively. Among the 6 parameters considered for this study, the pressure holding time contributes a minimum of 0.5961% to the yielding of the warpage. Overall, by optimizing the process parameters, warpage of the PET preform is minimized by 7.7202%, which helps to reduce wastage of the carbonated drink as well as the rejection rate of the preform during the filling operation. In a nutshell, the quality of the preform is improved.

Design and Optimization of tie Bar Breaking Problem in Injection Moulding Machine

Sequential Optimization Design Research on Rear Mould Board of Injection Machine

Multi-objective Robust Optimization of Injection Molding Process Parameters Based on TOPSIS

TECHNOLOGY Design Optimization of Stationary Platen of Plastic Injection Molding Machine Using FEA

Topological and Parameter Optimization Design on Front Platen of Injection Molding Machine

Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production

Structural scheme optimization design for the stationary platen of a precision plastic injection molding machine

Multidisciplinary robust and reliability-based design optimization of injection molding system

Optimization of a Commercial Injection-Moulded component by Using DOE and Simulation

Multi-objective performance optimal design of large-scale injection molding machine

Optimization of Injection Mold Based on Fuzzy Moldability Evaluation

Design and Parametric Optimization of the Injection Molding Process Using Statistical Analysis and Numerical Simulation

OPTIMIZATION OF INJECTION MOLDING PROCESS PARAMETER SETTINGS USING 3k GENERAL FACTORIAL DESIGN AND DATA VISUALIZATION

Part weight control via model free optimization for injection molding

Research on a Method of Injection Molding Machine Configuration Design Based on Instances

OPTIMAL PROCESS DESIGN CONSIDERING INTERACTIONS BETWEEN PROCESS PARAMETERS IN INJECTION MOLDING

Optimization of the injection molding process for the PC/ABS parts by integrating Taguchi approach and CAE simulation

Design, fabrication and analysis of pen mold for injection molding machine

Optimize Injection-Molding Process Parameters and Build an Adaptive Process Control System Based on Nozzle Pressure Profile and Clamping Force

Process Parameters Optimization Using a Novel Classification Model for Plastic Injection Molding

Experimental investigation of injection moulding using thermoplastic polyurethane