Abstract:We introduce a new mechanism to pump liquid in microchannels based on the directional growth and displacement of gas bubbles in conjunction with the non-directional and selective removal of the bubbles. A majority of the existing bubble-driven micropumps employs boiling despite the unfavorable scaling of energy consumption for miniaturization because the vapor bubbles can be easily removed by condensation. Other gas generation methods are rarely suitable for micropumping applications because it is difficult to remove the gas bubbles promptly from a pump loop. In order to eradicate this limitation, the rapid removal of insoluble gas bubbles without liquid leakage is achieved with hydrophobic nanopores, allowing the use of virtually any kind of bubbles. In this paper, electrolysis and gas injection are demonstrated as two distinctively different gas sources. The proposed mechanism is first proved by circulating water in a looped microchannel. Using H(2) and O(2) gas bubbles continuously generated by electrolysis, a prototype device with a looped channel shows a volumetric flow rate of 4.5-13.5 nL s(-1) with a direct current (DC) power input of 2-85 mW. A similar device with an open-ended microchannel gives a maximum flow rate of approximately 65 nL s(-1) and a maximum pressure head of approximately 195 Pa with 14 mW input. The electrolytic-bubble-driven micropump operates with a 10-100 times higher power efficiency than its thermal-bubble-driven counterparts and exhibits better controllability. The pumping mechanism is then implemented by injecting nitrogen gas bubbles to demonstrate the flexibility of bubble sources, which would allow one to choose them for specific needs (e.g., energy efficiency, thermal sensitivity, biocompatibility, and adjustable flow rate), making the proposed mechanism attractive for many applications including micro total analysis systems (microTAS) and micro fuel cells.

Enhanced capillary pumping through evaporation assisted leaf-mimicking micropumps

Studies On A Micropump Based On Evaporation And Capillary Effects

Molecular Diffusion Replaces Capillary Pumping in Phase-Change Driven Nanopumps

A self-priming microfluidic diaphragm pump capable of recirculation fabricated by combining soft lithography and traditional machining

A Hydrostatic Pressure-Driven Passive Micropump Enhanced with Siphon-Based Autofill Function.

A Minimized Valveless Electromagnetic Micropump for Microfluidic Actuation on Organ Chips

Design and Fabrication of a Microfluidic System with Nozzle/Diffuser Micropump and Viscosity

Continuous dynamic flow micropumps for microfluid manipulation

Chip-integrated non-mechanical microfluidic pump driven by electrowetting on dielectrics

A Miniaturized Archimedean Screw Pump for High-Viscosity Fluid Pumping in Microfluidics

Micropumping of liquid by directional growth and selective venting of gas bubbles

A Continuous, Low-Flow, and Multiplexing Pumping System for Microfluidics Applications

Non-Invasive Manipulation of Two-Phase Liquid-Liquid Slug Flow Parameters Using Magnetofluidics

Acoustic Atomization-Induced Pumping Based on a Vibrating Sharp-Tip Capillary

Development of a peristaltic micropump for bio-medical applications based on mini LIPCA

A Dual-Parallel Chamber Electromagnetic Micropump Fabricated Using 3D Printing Method from a Novel Magnetic Nanocomposite Material

Enhanced capillary pumping using open-channel capillary trees with integrated paper pads

Microfluidic pumping by micromolar salt concentrations

A 3D Miniaturized Glass Magnetic-Active Centrifugal Micropump Fabricated by SLE Process and Laser Welding

A Miniaturized Wireless Micropump Enabled by Confined Acoustic Streaming

A valve-less microfluidic peristaltic pumping method.