Abstract:Recovering gold from wastewater has both economic and environmental benefits. However, how to effectively recover it is challenging. In this work, a novel Fe-based metal-organic framework (MOF) was synthesized and decorated with 2,5-thiophenedicarboxylic acid to have a well-developed porous architecture to effectively recover Au(III) from water. The maximum Au(III) sorption capacity by the finally-synthesized porous material MIL-101(Fe)-TDCA reached 2350 mg/g at pH = 6.00 ± 0.15, which is one of the highest among all literature-reported relevant materials including MOFs, and high sorption strength can be maintained within a wide pH range from 2.0 to 10.0. Besides, Au(III) sorption efficiency at low concentrations (i.e., 3.5 × 10−4 mg/mL) reached over 99 %. Mechanically, outstanding Au(III) sorption by MIL-101(Fe)-TDCA resulted from the O/N/S-containing moieties on its surface, large surface area and porosity. The N- and S-containing functionalities (CS, CONH) served as electron donors to chelate Au(III). The O-containing (FeOFe, COFe, COOH, and coordinated H2O) and N-containing (CONH) moieties on MIL-101(Fe)-TDCA interacted with OH groups on the hydrolyzed species of Au(III) (AuCl3(OH)−, AuCl2(OH)2−, and AuCl(OH)3−) by hydrogen bond, which further increased Au(III) sorption. Furthermore, about 45.71 % of Au(III) was reduced to gold nanoparticles by CS groups on the decorated 2,5-dithiophene dicarboxylic acid during sorption on MIL-101(Fe)-TDCA. Over 98.35 % of Au(III) was selectively sorbed on MIL-101(Fe)-TDCA at pH 4.0, much higher than that of the coexisting heavy metal ions including Cu(II), Zn(II), Pb(II), and Ni(II) (<5 %), despite their same concentration at 0.01 mg/mL. Although sorption selectivity of a noble metal Pt(IV) by MIL-101(Fe)-TDCA is relatively poor (68.23 %), it could be acceptable. Moreover, reusability of MIL-101(Fe)-TDCA is also excellent, since above 90.5 % Au(III) still can be sorbed after two sorption-desorption cycles. Overall, excellent sorption performance and the roughly-calculated gold recycling benefits (26.30 %) highlight that MIL-101(Fe)-TDCA is a promising porous material for gold recovery from the aqueous phase.

Covalent Organic Polymer Containing Nitrogen and Oxygen Groups with High Adsorption Capacity and Selectivity for Gold Ions under Strongly Acidic Conditions

Highly efficient and selective extraction of gold by fluorinated imine-based covalent organic polymer

Synthesis of covalent thiourea organic polymer (CTOP) and adsorption of au (III) ions

Gold-loaded Graphene Oxide/pdpb Composites for the Synchronous Removal of Cr(VI) and Phenol

Highly Efficient and Selective Gold Recovery Based on Hypercross-Linking and Polyamine-Functionalized Porous Organic Polymers

Exploration of two novel highly efficient polymer composite materials based on 3-chloropropyltriethoxysilane-grafted waste para-aramid functionalized by organo-phosphonic acid/L-proline and their excellent adsorption performance for gold ions

Polythioamide-g-C3N4 for Highly Efficient and Selective Gold Recovery

Construction of porphyrin and viologen-linked cationic porous organic polymer for efficient and selective gold recovery

Highly selective and effective gold recovery from electronic wastewater by synergistic effect between covalent organic framework (COF) and MoS 2 : Performance and mechanisms

Efficient recovery of gold using Macroporous Metal-Organic framework prepared by the 'MOF in MOF' method

A robust cationic covalent triazine framework-based nanotrap for fast and efficient recovery of gold from electronic waste

Ultrahigh Capacity and Rapid Selective Recycling of Gold Ions by Organic Intercalated and Exfoliated Few-Layer Ti 3 C 2 T x Nanosheets

A MOF/poly(thioctic acid) composite for enhanced gold extraction from water matrices

Imidazopyridinium‐Linked Covalent Organic Frameworks for Efficient Gold Recovery

A novel phosphonic acid functionalized poly(vinyl choride) electrospun nanofiber for efficient adsorption of gold from aqueous solution

An O/N/S-rich porous Fe-based metal-organic framework (MOF) for gold recovery from the aqueous phase with excellent performance

A 2D Acridine‐Based Covalent Organic Framework for Selective Detection and Efficient Extraction of Gold from Complex Aqueous‐Based Matrices

High-efficiency gold recovery by additive-induced supramolecular polymerization of β-cyclodextrin

Covalent organic frameworks constructed by flexible alkyl amines for efficient gold recovery from leaching solution of e-waste

Synthesis of azole-functionalized microspheres and their adsorption properties for gold(I) thiosulfate complex

Selective Removal Mechanism of the Novel Zr-based Metal Organic Framework Adsorbents for Gold Ions from Aqueous Solutions