Abstract:A coupled thermo-mechanical bond-based peridynamical (TM-BB-PD) method is developed to simulate thermal cracking processes in rocks. The coupled thermo-mechanical model consists of two parts. In the first part, temperature distribution of the system is modeled based on the heat conduction equation. In the second part, the mechanical deformation caused by temperature change is calculated to investigate thermal fracture problems. The multi-rate explicit time integration scheme is proposed to overcome the multi-scale time problem in coupled thermo-mechanical systems. Two benchmark examples, i.e., steady-state heat conduction and transient heat conduction with deformation problem, are performed to illustrate the correctness and accuracy of the proposed coupled numerical method in dealing with thermo-mechanical problems. Moreover, two kinds of numerical convergence for peridynamics, i.e., m- and \(\delta \)-convergences, are tested. The thermal cracking behaviors in rocks are also investigated using the proposed coupled numerical method. The present numerical results are in good agreement with the previous numerical and experimental data. Effects of PD material point distributions and nonlocal ratios on thermal cracking patterns are also studied. It can be found from the numerical results that thermal crack growth paths do not increases with changes of PD material point spacing when the nonlocal ratio is larger than 4. The present numerical results also indicate that thermal crack growth paths are slightly affected by the arrangements of PD material points. Moreover, influences of thermal expansion coefficients and inhomogeneous properties on thermal cracking patterns are investigated, and the corresponding thermal fracture mechanism is analyzed in simulations. Finally, a LdB granite specimen with a borehole in the heated experiment is taken as an application example to examine applicability and usefulness of the proposed numerical method. Numerical results are in good agreement with the previous experimental and numerical results. Meanwhile, it can be found from the numerical results that the coupled TM-BB-PD has the capacity to capture phenomena of temperature jumps across cracks, which cannot be captured in the previous numerical simulations.

A bond-level energy-based peridynamics for mixed-mode fracture in rocks

An extended peridynamic model equipped with a new bond-breakage criterion for mixed-mode fracture in rock-like materials

A 3-D Conjugated Bond-Pair-based Peridynamic Formulation for Initiation and Propagation of Cracks in Brittle Solids

Numerical Simulations of Failure Characteristics of Rock Materials under Blasting Loads Using the Conjugated Bond-Pair-based Peridynamics

Quantifying Post-peak Behavior of Rocks with Type-I, Type-II, and Mixed Fractures by Developing a Quasi-State-Based Peridynamics

Strength-induced peridynamic modeling and simulation of fractures in brittle materials

Numerical Simulation of Failure of Rock-Like Material Subjected to Compressive Loads Using Improved Peridynamic Method

A Generalized Bond-Based Peridynamic Model for Quasi-Brittle Materials Enriched with Bond Tension–rotation–shear Coupling Effects

A dynamic damage constitutive model and three-dimensional internal crack propagation of rock-like materials in bond-based peridynamic

Hydromechanical Bond-Based Peridynamic Model for Pressurized and Fluid-Driven Fracturing Processes in Fissured Porous Rocks

An Extended Peridynamic Approach for Deformation and Fracture Analysis

Improved peridynamic model and its application to crack propagation in rocks

A New Phase Field Model for Mixed-Mode Brittle Fractures in Rocks Modified from Triple Shear Energy Criterion

A Coupled Thermomechanical Nonordinary State‐based Peridynamics for Thermally Induced Cracking of Rocks

An Extended Bond-Based Peridynamic Approach for Analysis on Fracture in Brittle Materials

A Novel Micropolar Peridynamic Model for Rock Masses with Arbitrary Joints

A new peridynamic mixed-mode bond failure model for interface delamination and homogeneous materials fracture analysis

Numerical Simulation of Initiation, Propagation and Coalescence of Cracks Using the Non-Ordinary State-Based Peridynamics

An Innovative Bond–based Peridynamic Model for Fracture Analysis of Orthotropic Materials

A Coupled Thermo-Mechanical Bond-Based Peridynamics for Simulating Thermal Cracking in Rocks

The Modeling of Crack Propagation and Coalescence in Rocks under Uniaxial Compression Using the Novel Conjugated Bond-Based Peridynamics