Abstract:Electrochemical production of H2O2 from O-2 via the two-electron reduction reaction (2e-ORR) is a green and safe process that is being heavily investigated. Zeolitic imidazolate frameworks (ZIF) as a subclass of metal-organic frameworks (MOFs) have attracted enormous scientific interests due to their high porosity, excellent mechanical stability, tunable surface properties, and exceptional chemical and thermal stabilities. Herein, a series of pyrolyzed ZIF catalysts (p-ZIF) were synthesized by treating 2-methylimidazole zinc salt (ZIF-8) at high temperatures (900, 950 and 1000 degrees C). During pyrolysis, zinc was vaporized, leaving the metal-free nitrogen-doped porous graphitic carbon materials. The effects of the pyrolysis temperature on the structure and catalytic performance of the p-ZIF catalysts in 2e-ORR were systematically studied. In 2e-ORR in an acidic electrolyte, the p-ZIF catalysts displayed low overpotential, low Tafel slope, and negligible activity loss after 3000 cycles of accelerated durability testing (ADT). In particular, the p-ZIF-950 catalyst possessed the highest H2O2 partial current of 0.185 mA at 0 V vs. RHE, followed by the p-ZIF-900 (0.146 mA) and p-ZIF-1000 (0.135 mA) catalysts. The H2O2 selectivity over the p-ZIF-950 catalyst was also constantly higher than those over the other two p-ZIF catalysts across the potential range investigated and maximized at 89.2%. Highly efficient and durable H2O2 production was demonstrated on the p-ZIF-950 catalyst by the linear accumulation of H2O2 to 522 minol.g(cat)(-1) within 6 h, translating to an H2O2 production rate of 87 mmol.g(cat)(-1).h(-1). The morphology, composition, carbon defect, texture, and surface chemical state were characterized by techniques such as transmission electron microscopy (TEM), elemental analysis, Raman spectroscopy, N-2 physisorption, and X-ray photoelectron spectroscopy (XPS). The p-ZIF catalysts not only nicely carried over the regular rhombic dodecahedral morphology of ZIF-8, but also possessed abundant amount of nitrogen, high specific surface area, and hierarchical pore structure. According to the characterization results, the specific surface area and carbon defect are unlikely the key factors that determine the catalytic performance, while the evolutions of the average pore size and surface content of graphitic N mimicked those of the H2O2 partial current and selectivity on the p-ZIF catalysts. In light of the literature works, the large pore size is proposed to facilitate the in-diffusion of O-2 and out-diffusion of H2O2, while the graphitic N is able to enhance the activation of O-2 and desorption of H2O2, both of which are beneficial to the kinetics of the 2e-ORR reaction.

Tailoring Heteroatoms in Conjugated Microporous Polymers for Boosting Oxygen Electrochemical Reduction to Hydrogen Peroxide

Optimizing Heteroatom Doping for Efficient Hydrogen Peroxide Production via Oxygen Reduction

Porous Heterostructure of Graphene/hexagonal Boron Nitride As an Efficient Electrocatalyst for Hydrogen Peroxide Generation

Design of Thiazolo[5,4- d ]thiazole-Bridged Ionic Covalent Organic Polymer for Highly Selective Oxygen Reduction to H 2 O 2

Design of Thiazolo[5,4-d]thiazole-Bridged Ionic Covalent Organic Polymer for Highly Selective Oxygen Reduction to H2O2

Pyrolysis-Free Mechanochemical Conversion of Small Organic Molecules into Metal-Free Heteroatom-Doped Mesoporous Carbons for Efficient Electrosynthesis of Hydrogen Peroxide

Embellished Hollow Spherical Catalyst Boosting Activity and Durability for Oxygen Reduction Reaction

Polymerizable Ionic Liquid-Derived N, S co-Doped sp3/sp2 Carbon as Electrocatalyst for H2O2 Generation

Dipole-Dipole Tuned Electronic Reconfiguration of Defective Carbon Sites for Efficient Oxygen Reduction into H2O2

Dipole–Dipole Tuned Electronic Reconfiguration of Defective Carbon Sites for Efficient Oxygen Reduction into H 2 O 2

Pyrolyzed Polydopamine-Modified Carbon Black for Selective and Durable Electrocatalytic Oxygen Reduction to Hydrogen Peroxide in Acidic Medium

Nitrogen-doped Carbon Pyrolyzed from ZIF-8 for Electrocatalytic Oxygen Reduction to Hydrogen Peroxide

Enhanced electrocatalytic performance for H2O2 generation by boron-doped porous carbon hollow spheres

Chemically Engineering Multiple Active Sites in N, P, O-Tridoped Carbocatalyst: Unveiling Structure–Performance Relationship for Efficient Electrochemical Production of Hydrogen Peroxide

Heteroatom-Doped Carbon-Based Catalysts Synthesized through a "Cook-Off" Process for Oxygen Reduction Reaction

Honeycomb-like porous carbon with N and S dual-doping as metal-free catalyst for oxygen reduction reaction

Highly Active and Selective Oxygen Reduction to H2O2 on Boron-Doped Carbon for High Production Rates

Mechanism investigation of enhanced electrochemical H2O2 production performance on oxygen-rich hollow porous carbon spheres

Promoting H2O2 production via 2-electron oxygen reduction by coordinating partially oxidized Pd with defect carbon

Nitrogen and Sulfur Dual-Doped Carbon Nanotube Derived from a Thiazolothiazole Based Conjugated Microporous Polymer As Efficient Metal-Free Electrocatalysts for Oxygen Reduction Reaction

Efficient Electrochemical Production of H2O2 on Hollow N-Doped Carbon Nanospheres with Abundant Micropores