Abstract:Electrochemical production of H2O2 from O-2 via the two-electron reduction reaction (2e-ORR) is a green and safe process that is being heavily investigated. Zeolitic imidazolate frameworks (ZIF) as a subclass of metal-organic frameworks (MOFs) have attracted enormous scientific interests due to their high porosity, excellent mechanical stability, tunable surface properties, and exceptional chemical and thermal stabilities. Herein, a series of pyrolyzed ZIF catalysts (p-ZIF) were synthesized by treating 2-methylimidazole zinc salt (ZIF-8) at high temperatures (900, 950 and 1000 degrees C). During pyrolysis, zinc was vaporized, leaving the metal-free nitrogen-doped porous graphitic carbon materials. The effects of the pyrolysis temperature on the structure and catalytic performance of the p-ZIF catalysts in 2e-ORR were systematically studied. In 2e-ORR in an acidic electrolyte, the p-ZIF catalysts displayed low overpotential, low Tafel slope, and negligible activity loss after 3000 cycles of accelerated durability testing (ADT). In particular, the p-ZIF-950 catalyst possessed the highest H2O2 partial current of 0.185 mA at 0 V vs. RHE, followed by the p-ZIF-900 (0.146 mA) and p-ZIF-1000 (0.135 mA) catalysts. The H2O2 selectivity over the p-ZIF-950 catalyst was also constantly higher than those over the other two p-ZIF catalysts across the potential range investigated and maximized at 89.2%. Highly efficient and durable H2O2 production was demonstrated on the p-ZIF-950 catalyst by the linear accumulation of H2O2 to 522 minol.g(cat)(-1) within 6 h, translating to an H2O2 production rate of 87 mmol.g(cat)(-1).h(-1). The morphology, composition, carbon defect, texture, and surface chemical state were characterized by techniques such as transmission electron microscopy (TEM), elemental analysis, Raman spectroscopy, N-2 physisorption, and X-ray photoelectron spectroscopy (XPS). The p-ZIF catalysts not only nicely carried over the regular rhombic dodecahedral morphology of ZIF-8, but also possessed abundant amount of nitrogen, high specific surface area, and hierarchical pore structure. According to the characterization results, the specific surface area and carbon defect are unlikely the key factors that determine the catalytic performance, while the evolutions of the average pore size and surface content of graphitic N mimicked those of the H2O2 partial current and selectivity on the p-ZIF catalysts. In light of the literature works, the large pore size is proposed to facilitate the in-diffusion of O-2 and out-diffusion of H2O2, while the graphitic N is able to enhance the activation of O-2 and desorption of H2O2, both of which are beneficial to the kinetics of the 2e-ORR reaction.

Pyrolyzed Polydopamine-Modified Carbon Black for Selective and Durable Electrocatalytic Oxygen Reduction to Hydrogen Peroxide in Acidic Medium

Kinetically Facilitating Two-electron Oxygen Reduction by the Synergy of Multiple Pyrrolic Nitrogen Sites for Ultra-high-yield Electrochemical Hydrogen Peroxide Production

Dipole-Dipole Tuned Electronic Reconfiguration of Defective Carbon Sites for Efficient Oxygen Reduction into H2O2

Promoting H2O2 production via 2-electron oxygen reduction by coordinating partially oxidized Pd with defect carbon

Dipole–Dipole Tuned Electronic Reconfiguration of Defective Carbon Sites for Efficient Oxygen Reduction into H 2 O 2

Highly efficient electrosynthesis of hydrogen peroxide through reversible transformation between catechol and o-benzoquinone on polydopamine modified carbon black

Ultra‐Rapid Electrocatalytic H2O2 Fabrication over Mono‐Species and High‐Density Polypyrrolic‐N Sites

Probing Oxygen-to-Hydrogen Peroxide Electro-Conversion at Electrocatalysts Derived from Polyaniline

Pulsed Electrocatalysis Enables An Efficient 2-Electron Oxygen Reduction Reaction For H2o2 Production

Facilitating two-electron oxygen reduction with pyrrolic nitrogen sites for electrochemical hydrogen peroxide production

Tandem Oxidation Activation of Carbon for Enhanced Electrochemical Synthesis of H2O2: Unveiling the Role of Quinone Groups and Their Operando Derivatives

Surface oxidation of commercial activated carbon with enriching carboxyl groups for high-yield electrocatalytic H2O2production

Pyrolysis-Free Mechanochemical Conversion of Small Organic Molecules into Metal-Free Heteroatom-Doped Mesoporous Carbons for Efficient Electrosynthesis of Hydrogen Peroxide

Selective H2O2 electrosynthesis by O-doped and transition-metal-O-doped carbon cathodes via O2 electroreduction: A critical review

Oxygenated boron-doped carbon via polymer dehalogenation as an electrocatalyst for high-efficiency O2 reduction to H2O2

Optimizing Heteroatom Doping for Efficient Hydrogen Peroxide Production via Oxygen Reduction

Efficient Electrochemical Production of H2O2 on Hollow N-Doped Carbon Nanospheres with Abundant Micropores

Pulsed electrocatalysis enables the stabilization and activation of carbon-based catalysts towards H2O2 production

Selective H2o2 Electrosynthesis By O-Doped And Transition-Metal-O-Doped Carbon Cathodes Via O-2 Electroreduction: A Critical Review

Electrosynthesis of H2O2 through a two-electron oxygen reduction reaction by carbon based catalysts: From mechanism, catalyst design to electrode fabrication

Nitrogen-doped Carbon Pyrolyzed from ZIF-8 for Electrocatalytic Oxygen Reduction to Hydrogen Peroxide