Abstract:This study investigates the use of geopolymer technology as an alternative for the management of mine tailings, which is a serious environmental problem in mining areas, including the Arequipa region of Peru. In this study, the mixture of stabilized mine tailings with different percentages of binders (i.e., metakaolin and pumice) and their impact on the mechanical, microstructural, and toxicological properties of the synthesized geopolymers were analyzed. The ratios of mine tailings to binder material varied between 100/0 and 0/100. The activation was carried out with an alkaline solution of sodium hydroxide (10 M) and sodium silicate (modulus 2.5). Specimens were fabricated as 50 mm cubes, and the seven mix designs were evaluated in triplicate. The evaluations included compressive strength at 7, 14, 28, and 56 days of curing, chemical analysis by Fourier Transform Infrared Spectroscopy (FT-IR), microstructural characterization by X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM/EDS), thermal behavior by thermogravimetry and differential thermal analysis (TGA/DTA) between 40 °C and 1000 °C, and toxicological tests by the Toxicity Characteristic Leaching Procedure (TCLP, EPA 1311) to determine the efficiency of immobilization of toxic metals. The results demonstrate significant improvements in compressive strength for the F50 specimens compared to A0, with increases of approximately 300%, 270%, and 461% observed at 7, 28, and 56 days of curing, respectively, with microstructural stability with an average pore size of 7.21 μm, and efficiency in the immobilization of heavy metals in geopolymers with 30% or 40% binder (60%–70% mine tailings). The leachate concentrations of As, Cd, Pb, and Hg were below the established thresholds, indicating that the stabilized mine tailings can be classified as "non-hazardous materials". Geopolymers with 30% to 50% binder showed strength development with microstructural stability and efficiency in the immobilization of heavy metals, complying with current regulations. Therefore, these geopolymers are suitable for various applications and in different environmental conditions.

Experimental investigations on sustainable mortar containing mining tailing as partial replacement of fine aggregate

Gold and Iron Tailings to Improve the Compressive Strength and Workability of Concrete

Electrochemical analysis of the effect of copper tailings on mortars

Exploring the Potential for Utilization of Medium and Highly Sulfidic Mine Tailings in Construction Materials: A Review

Feasibility Evaluation of Replacing River Sand with Copper Tailings

Increasing the Sustainability of the Stabilization/Solidification of Potentially Toxic Elements Contained in Tailings from an Active Mine Using a Modified Lime Mortar

Utilization of Molybdenum Tailings in Concrete Manufacturing: A Review

Transformation of mine tailings into cement-bound aggregates for use in concrete by granulation in a high intensity mixer

Experimental Investigation on the Performance of Cement Mortar by Partial Replacement of the Standard Sands with Sulfide-Contained Iron Tailings

Carbonation and chloride penetration performance of self-compacting concrete with masonry and concrete wastes

Experimental Study on the Utilization of Metallic Tailings As Cement Active Admixture

Mine Tailings and Bottom Ash from Waste Incineration as Alternative Fine Aggregates for Controlled Low-Strength Materials

Examining the effect of the particle modification on zinc tailing waste as a cementitious material in concrete: performance and toxicity assessment

Disposal of solid waste as building materials: A study on the mechanical and durability performance of concrete composed of gold tailings

Evaluation of mine tailings' potential as supplementary cementitious materials based on chemical, mineralogical and physical characteristics

Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete

Optimization of Geopolymers for Sustainable Management of Mine Tailings: Impact on Mechanical, Microstructural, and Toxicological Properties

Study on comprehensive utilization of tailings by using bioleaching and microbial-cementation

Early-age reactivity and strength development in high volume mine tailings-based alkali activated binders and their application potential

Sustainable use of magnesite mine waste in self-compacting concrete and its study on strength, microstructure, cost and CO2 emission

Synthesis and influencing factors of high-performance concrete based on copper tailings for efficient solidification of heavy metals