Abstract:In this study, native ureolytic bacteria were isolated from copper tailings soils to perform microbial-induced carbonate precipitation (MICP) tests and evaluate their potential for biocement formation and their contribution to reduce the dispersion of particulate matter into the environment from tailings containing potentially toxic elements. It was possible to isolate a total of 46 bacteria; among them only three showed ureolytic activity: Priestia megaterium T130-1, Paenibacillus sp. T130-13 and Staphylococcus sp. T130-14. Biocement cores were made by mixing tailings with the isolated bacteria in presence of urea, resulting similar to those obtained with Sporosarcina pasteurii and Bacillus subtilis used as positive control. Indeed, XRD analysis conducted on biocement showed the presence of microcline ( B. subtilis 17%; P. megaterium 11. 9%), clinochlore ( S. pasteurii , 6.9%) and magnesiumhornblende ( Paenibacillus sp. 17.8%; P. megaterium 14.6%); all these compounds were not initially present in the tailings soils. Moreover the presence of calcite (control 0.828%; Paenibacillus sp. 5.4%) and hematite (control 0.989%; B. subtilis 6.4%) was also significant unlike the untreated control. The development of biofilms containing abundant amount of Ca, C, and O on microscopic soil particles was evidenced by means of FE-SEM-EDX and XRD. Wind tunnel tests were carried out to investigate the resistance of biocement samples, accounted for a mass loss five holds lower than the control, i.e., the rate of wind erosion in the control corresponded to 82 g/m 2 h while for the biocement treated with Paenibacillus sp. it corresponded to only 16.371 g/m 2 h. Finally, in compression tests, the biocement samples prepared with P. megaterium (28.578 psi) and Paenibacillus sp. (28.404 psi) showed values similar to those obtained with S. pasteurii (27.102 psi), but significantly higher if compared to the control (15.427 psi), thus improving the compression resistance capacity of the samples by 85.2% and 84.1% with respect to the control. According to the results obtained, the biocement samples generated with the native strains showed improvements in the mechanical properties of the soil supporting them as potential candidates in applications for the stabilization of mining liabilities in open environments using bioaugmentation strategies with native strains isolated from the same mine tailing.

Study on comprehensive utilization of tailings by using bioleaching and microbial-cementation

Copper recovery from tailings through bioleaching and further application of bioleached tailings residue: Comprehensive utilization of tailings

Inhibition of cadmium releasing from sulfide tailings into the environment by carbonate-mineralized bacteria

Leaching behavior of copper tailings solidified/stabilized using hydantoin epoxy resin and red clay

Experimental Study on Cemented Tailings Backfill Based on Microbially Induced Calcite Precipitation

Accumulated Copper Tailing Solid Wastes with Specific Compositions Encourage Advances in Microbial Leaching

EXPERIMENTAL STUDY OF THE IMPROVEMENT OF THE PROPERTIES OF THE TAILING BY BIOMINERALIZATION

Properties and mechanisms of steel slag strengthening microbial cementation of cyanide tailings

Experimental study on solidification and remediation of lead–zinc tailings based on microbially induced calcium carbonate precipitation (MICP)

Analysis of unconfined compressive strength and environmental impact of MICP-treated lead-zinc tailings sand instead of sand as embankment material

Heavy Metal Immobilisation and Particle Cementation of Tailings by Biomineralisation

Recycling of Waste Iron Tailings by Biomineralization for Cemented Paste Backfill Production

MICP mediated by indigenous bacteria isolated from tailings for biocementation for reduction of wind erosion

Bio-Mediated Method for Immobilizing Copper Tailings Sand Contaminated with Multiple Heavy Metals

Use of Tolerant Population of P. Distichum for Revegetation of a Pb/Zn Mine Tailings at Lechang: Field Experiment

A new strategy on biomining of low grade base-metal sulfide tailings

Bacterial shifts during in-situ mineralization bio-treatment to non-ferrous metal(loid) tailings

Experimental Investigation of sample preparation and grouting technology on microbially reinforced tailings

Montmorillonite-coupled microbially induced carbonate precipitation (MICP) enhanced contaminant removal and carbon capture in cyanide tailings

Pollution control performance of solidified nickel-cobalt tailings on site: Bioavailability of heavy metals and microbial response

Feasibility Evaluation of Replacing River Sand with Copper Tailings