Abstract:The nonuniformity of samples in reinforcement treatment is a bottleneck that restricts the development of microbial geotechnical technologies, which severely affects the reinforcement effect of microbially reinforced tailings and other fine-grained geotechnical materials. This study presents a mixing method that represents an innovative sample preparation and grouting technology for reinforcing tailings using microbially induced calcite precipitation (MICP) based on the characteristics of tailings discharged in the form of mud and accumulated layer-by-layer. A large number of mechanical experiments and microanalyses were conducted to compare the effects of various methods on tailings reinforcement, including the methods of adding bacterial solution (i.e., the traditional grouting method and the proposed mixing method) and the treatment methods of cementing solution (i.e., the grouting method and soaking). The results of the shear test showed that the strength of the samples generated by the mixing method increased compared with the original tailings samples and samples generated using the traditional grouting method. Moreover, miniature cone penetration test results showed that the samples made using the mixing method had better uniformity, which could be attributed to the fine particles (silt and clay particles) of tailings that strongly adsorb bacteria and the low permeability of the fine particle tailings, which is not conducive to the spread of bacteria. In the tailings samples, the traditional grouting method only makes the bacteria gather at the region where the bacterial solution initially makes contact. However, the mixing method evenly distributed the bacteria among the tailings particles, which significantly improved the reinforcement effect of bacteria, as the reinforcement reaction occurred throughout each region of the samples. Therefore, the mixing method can be used for reinforcement research and in the application of MICP to tailings or other fine-grained geotechnical materials.

EXPERIMENTAL STUDY OF THE IMPROVEMENT OF THE PROPERTIES OF THE TAILING BY BIOMINERALIZATION

Heavy Metal Immobilisation and Particle Cementation of Tailings by Biomineralisation

Inhibition of cadmium releasing from sulfide tailings into the environment by carbonate-mineralized bacteria

Study on comprehensive utilization of tailings by using bioleaching and microbial-cementation

Experimental study on solidification and remediation of lead–zinc tailings based on microbially induced calcium carbonate precipitation (MICP)

Bio-Mediated Method for Immobilizing Copper Tailings Sand Contaminated with Multiple Heavy Metals

Pollution control performance of solidified nickel-cobalt tailings on site: Bioavailability of heavy metals and microbial response

Experimental Study on Cemented Tailings Backfill Based on Microbially Induced Calcite Precipitation

Experimental Study On Physical And Mechanical Properties Of Iron Tailing Materials

Experimental Investigation of sample preparation and grouting technology on microbially reinforced tailings

Leaching characteristics and stabilization of heavy metals in tin-polymetallic tailings by sodium diethyl dithiocarbamate intercalated montmorillonite (DDTC-Mt)

Analysis of unconfined compressive strength and environmental impact of MICP-treated lead-zinc tailings sand instead of sand as embankment material

Effect of phosphate-mineralized bacteria on multi-metals migration behavior in vanadium tailing slags: Coexistence of immobilization and mobilization

Experimental Study on the Effect of an Organic Matrix on Improving the Strength of Tailings Strengthened by MICP

Montmorillonite-coupled microbially induced carbonate precipitation (MICP) enhanced contaminant removal and carbon capture in cyanide tailings

Experimental Study on Mechanical Characteristics of Copper Tailing Materials with Sulfur Content

Use of sludge stabilization products for remediation of heavy metal (loid)s-contaminated mine tailings: Physicochemical, biochemical and microbial mechanisms

Geotechnical Properties of Mine Tailings

Microbial-mediated metal(loid) immobilization in mulch-covered tailings

MECHANICAL CHARACTERISTICS OF IRON MINE TAILING MATERIALS AND ANALYSIS ON DEFORMATION AND STABILITY OF TAILING DAM

Copper recovery from tailings through bioleaching and further application of bioleached tailings residue: Comprehensive utilization of tailings