Abstract:Many previous studies have examined solid-state particle discharge systems. However, several drawbacks have been encountered in terms of laboratory-scale particle feeding systems (e.g., high feeding rates, discontinuous feeding characteristics, the absence of long-term stability, and the use of high carrier gas volume rates). In this study, a state-of-the-art screw-assisted rotary feeding system was developed and evaluated in terms of aerosolization characteristics such as particle number concentration, geometric mean diameter, and geometric standard deviation. The various experimental conditions included changes in the rotational speed of the rotor, changes in the number of rotor grooves, and the existence or nonexistence of screw operation. Calcium carbonate (CaCO 3 ) powder was selected as the discharged sorbent particle. To verify the performance of the designed feeding system, we measured number concentrations with and without operation of the screw. Uniformity (i.e., the steadiness of feeding characteristics over time) was analyzed using a condensation particle counter. As the rotational speed and the number of rotor grooves increased, the number concentration and the frequency of discharging sorbent particles increased, whereas the coefficient of variation decreased. However, when the loading time was less than the critical time (∼0.8 s), the number concentration decreased and the coefficient of variation increased again according to the rotational speed. Stability (i.e., the invariability of the size distribution in various rotational speeds of the rotor for three different rotors) was also analyzed using an aerodynamic particle sizer and a scanning mobility particle sizer. The results of both aerosol measurement and scanning electron microscopy analysis showed that the geometric mean diameter and the geometric standard deviation of aerosolized sorbent particles remained constant under all the experimental conditions. We also determined that the region in which the coefficient of variation was less than 0.1 was the stable operation region for this screw-assisted rotary feeding system.

Study of local powder mixing in a screw reactor: Characterisation of the active layer renewal

Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder

CFD Modelling of the Effects of Local Turbulence Intensification on Synthesis of LiFePO4 Particles in an Impinging Jet Reactor

Intensification of liquid mixing and local turbulence using a fractal injector with staggered conformation

The Effects of Processing Parameters on the Properties of Micro-Scale Porous Surface for a Micro-Channel Reactor

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Numerical study of dense powder flow in a rotating drum: Comparison of CFD to experimental measurements

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

3D Eulerian-Eulerian modeling of a screw reactor for biomass thermochemical conversion. Part 1: Solids flow dynamics and back-mixing

Investigating screw-agitator speed ratio impact on feeding performance in pharmaceutical manufacturing using discrete element method

Mechanistic understanding of the effects of process and design parameters on the mixing dynamics in continuous twin-screw granulation

A novel methodology for data analysis of dynamic angle of repose tests and powder flow classification

Assessing Local Residence Time Distributions in Screw Extruders Through a New In‐line Measurement Instrument

Analysis of the Dispersive and Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle Tracking

Experimental Characterisation and Modelling of Homogeneous Solid Suspension in an Industrial Stirred Tank

Numerical study of mixing dynamics inside the novel elements of a corotating nontwin screw extruder

Design and Characterization of an Improved Screw-Assisted Rotary Feeding System for Aerosolization of Ultra-Small Quantities of Particulate Solids

Study of Dynamic Flow and Mixing Performances of Tri-Screw Extruders with Finite Element Method

Exploration of improved, roller-based spreading strategies for cohesive powders in additive manufacturing via coupled DEM-FEM simulations

Local and global gas-liquid mass transfer in a micro-packed bed reactor utilizing a noninvasive colorimetric technique

Model and Experimental Study of Relationship Between Solid Fraction and Back-Mixing in a Fluidized Bed