Abstract:Abstract Many wooden Chinese historic buildings are destroyed due to the ravages of frequent fire disasters. The fire risk of historic buildings are highly enlarged since a long-time weathered wooden structures in the natural environment. The clean fire-extinguishing technology using fluorinated chemical gases to put out a historic building fire rapidly at the initial stage is highly recommended and widely used. However, the gaseous hydrogen fluoride (HF) yielded during the fire suppression process could be a potential method to result in secondary damage due to its corrosiveness. Nowadays, experiments were employed to clarify the effect of fire suppression on the surface of historic wooden buildings. Five traditional fluorinated chemical gases, H-37, FK-5-1-12, H-1323, H-2402, and H-1301, are used to suppress a fixed flame. The wooden samples, including a Dao Talisman board, a painting paper, and wooden chips, are placed in a chamber. Wooden chips consist of traditional and weathered samples (acting as the Chinese historic buildings). The concentration of gaseous products yielded from fire suppression are monitored by a gas-FTIR from ABB, and the surface analysis is conducted by a Quanta FEG SEM–EDX from FEI. It is observed that flame enhancement happens at the early stage of fire suppression and varies with fire agents. The amount of F-deposited on the wooden surface is positively correlated with a total amount of gaseous HF. The color change mechanism of the wooden surface is comprehensive, although the amount of HF is a leading factor. The influence of HF on color change depends on the amount of both gaseous H 2 O and HF. It is concluded that the value of L* of the traditional chip is much easier to be reduced comparing with weathered samples with the same wood grain. The reduction of $${\mathrm{b}}^{*}$$ b ∗ value of weathered samples is much larger than the traditional ones. It suggests the weathered chips show a color shift toward blue because of fire suppression. The present study hopes to provide a basic acknowledgment for the comprehensive understanding of secondary damage caused by fire suppression.

Fire suppression efficiency improvement and comparative analysis of flake black lead composite

Investigating the efficacy of expanded graphite/NaCl composite powder as an extinguishing agent for metal combustion suppression

Enhanced suppression of metal combustion processes using a compound expansible graphite extinguishing agent: Experimental study and mechanistic insights

Experimental Study on Performance of Bromotrifluoropropene/Zeolite 13X Composite Powders in Suppressing Gasoline Fires

Experimental Study on Fire Suppression Performance of Gas-solid Composite Powders in Tibet

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Synergistic Flame Retardancy of Linear Low-Density Polyethylene with Surface Modified Intumescent Flame Retardant and Zinc Borate

Improving the Performance of Fluoroprotein Foam in Extinguishing Gasoline Pool Fires with Addition of Bromofluoropropene

Comparative Study on Interfacial Properties, Foam Stability, and Firefighting Performance of C6 Fluorocarbon Surfactants with Different Hydrophilic Groups

Effect of zinc borate on the fire and thermal degradation behaviors of a poly(3-hydroxybutyrate-co-4-hydroxybutyrate)-containing intumescent flame retardant

Experimental Study of Suppressing Oil Pool Fire with Thinned Powder

Engineering Sulfonated Carbon Black for Flame-Retardant and Smoke-Suppressive Polycarbonate with Well-Preserved Mechanical Performances

Evaluating the Effectiveness of Complex Fire-Retardants on the Fire Properties of Ultra-low Density Fiberboard (ULDF)

Influences of 4ZnO · B 2 O 3 · H 2 O whisker based intumescent flame retardant on the mechanical, flame retardant and smoke suppression properties of polypropylene composites

The color change analysis of historic wooden remains after fire-suppression by fluorinated chemical gases

Experimental Studies on the Extinction of Methane/air Cup-Burner Flames with Gas–solid Composite Particles

The Combustion and Mechanical Properties of Guanidine Phosphate-Boron Compound-Silica Sol Composite Flame Retardant on Wooden Structure Building Components

Improvement of Water Mist Fire Suppression Performance with Composite Additives

Effect of Boron-Zinc-Aluminum-Silicium Compounds on the Fire Performance of Ultra-Low Density Fiberboards (Uldfs)

The preparation of ZIF-67 and its synergistic effect on fire performance of intumescent flame retardant polypropylene

Fire Performance of Ultra-Low Density Fiberboard (uldf) with Complex Fire-Retardants