Abstract:Fluoride (F−) pollution in groundwater is an important environmental issue and capacitive deionization (CDI) holds promise for defluorination at moderate concentrations (e.g., 200−1,000mgL−1). However, existing electrodes suffer from the overlap of electrical-double-layer (EDL) and severe co-ion effects at low (e.g., <200mgL−1) and high sodium fluoride (NaF) concentrations (e.g., >1,000mgL−1), respectively, exhibiting poor salt adsorption capacity (SAC). Hence, a three-layer structured electrode, “membrane/carbon nanotube (CNT)/activated carbon (AC)” (CNT-MCE), was prepared through electrospinning CNT onto AC, followed by a polymer membrane coating. Compared to AC and membrane coated electrode, CNT-MCE with mesopore-dominated structure prevented EDL overlap, achieving a higher SAC of 40.8mgg−1 at 100mgL−1 NaF. At 1,500mgL−1 NaF, the positively charged CNT-MCE exhibited an improved SAC of 58.8mgg−1 by inhibiting co-ion effects. Meanwhile, CNT-MCE consistently demonstrated superb SACs at 200−800mgL−1 NaF and maintained excellent stability over a wide concentration gradient by inhibiting severe oxidation. Notably, CNT-MCE successfully decreased the F− concentration in simulated groundwater from 3.4 to 1.1mgL−1. Overall, our work provides an efficient strategy of electrode design to broaden the applicability of CDI for groundwater defluorination over a wide concentration gradient. Environmental Implication Exposing to groundwater with excessive fluoride will lead to serious damage on the ecosystem and human health. A novel three-layer structured electrode was prepared and used as anode in capacitive deionization for efficient fluoride removal from groundwater. With mesopore-dominated structure, positively charged surface and good conductivity, the prepared electrode could promote the formation of electrical double layer in the solution with low concentration of fluoride and inhibit co-ion repulsion effect in the solution with high concentration of fluoride, which exhibited the superb defluorination capacities over wide concentration gradients. Additionally, the prepared electrode showed outstanding defluorination stability by inhibiting serious oxidation.

Engineering porous biochar for capacitive fluorine removal

From MOF to Al/N-doped porous carbon: Creating multiple capture sites for efficient capacitive deionization defluorination

Enhanced electro-Fenton performance by fluorine-doped porous carbon for removal of organic pollutants in wastewater

Removal of fluoride using platanus acerifoli leaves biochar - an efficient and low-cost application in wastewater treatment

Efficient groundwater defluorination over a wide concentration gradient through capacitive deionization with a three-layer structured membrane coating electrode

Preparation of MOF/polypyrrole and flower-like MnO2 electrodes by electrodeposition: High-performance materials for hybrid capacitive deionization defluorination

Efficient phosphorus removal from ultra-low concentration wastewater by flow-electrode capacitive deionization

Biochar cathode: Reinforcing electro-Fenton pathway against four-electron reduction by controlled carbonization and surface chemistry

Biochar with inherited negative surface charges derived from Enteromorpha prolifera as a promising cathode material for capacitive deionization technology

[Adsorption Characteristics of Fluoride in Low-Concentration Water by Aluminum and Zirconium-Modified Biochar].

State-of-the-art of research progress on adsorptive removal of fluoride-contaminated water using biochar-based materials: Practical feasibility through reusability and column transport studies

Efficient Removal of Fluoride Using Polypyrrole-Modified Biochar Derived from Slow Pyrolysis of Pomelo Peel: Sorption Capacity and Mechanism

High H2O2 selectivity and enhanced Fe2+ regeneration toward an effective electro-Fenton process based on a self-doped porous biochar cathode

Boosting active sites of protogenetic sludge-based biochar by boron doping for electro-Fenton degradation towards emerging organic contaminants

Removal of Phosphorus Using Biochar Derived from Fenton Sludge: Mechanism and Performance Insights.

Performance of Fluoride Electrosorption Using Micropore-Dominant Activated Carbon As an Electrode

Utilization and value-adding of waste: Fabrication of porous material from chitosan for phosphate capture and energy storage

In-situ synthesis of UiO-66-NH2 on porous carbon nanofibers for high performance defluoridation by capacitive deionization

Zinc oxide nanosheet decorated self-supporting hierarchical porous wood carbon electrode for efficient capacitive deionization defluorination

Bamboo-Derived Low-Cost Mesoporous Biochar for Efficient Removal of Per- and Polyfluoroalkyl Substances from Contaminated Water

Recovery and reuse of floc sludge for high-performance capacitors