Abstract:The methanation process, or Sabatier process, allows carbon dioxide and carbon monoxide to be hydrogenated into methane, which can be subsequently injected (once the gas grid specifications have been respected) into the gas network infrastructures already present in Europe. This process can be effectively adopted to convert captured CO 2 streams from power plants or hard to abate plants by using green hydrogen from renewable-driven water electrolysis. The technical aspects of concern in the methanation process are certainly the strong exothermicity of the process, with consequent possible generation of hotspots along the entire catalyst bed and the management of reaction heat through thermal recovery. These peculiar aspects influence the choice of construction materials and geometry of the methanation reactor, operating parameters, cooling system, type of catalyst/support and the initial conditions of the feed. In particular, the generation of hotspots influences the local kinetic reaction in the methanation reactor, the diffusional limits of hydrogen and carbon dioxide inside the catalyst and the chemical-physical characteristics of the catalyst bed. The present work reports a first scale-up of the Sabatier process, developed in Aspen Plus simulation environment, with the following characteristics: reactor size to process 925 Nm 3 /h, (750 hydrogen and 175 carbon dioxide), at 15 bar and 250 °C. After the implementation in the steady state, a dynamic simulation is performed to carry out a transient study of the entire plant. In particular, the attention is focused on the variation in the hydrogen load, produced by electrolysis from the energy surplus from renewable sources. Considering the variable nature of the power flow supplied to the electrolyser and therefore any shutdown and cold start-up phases of this equipment, the following load variation scenarios for the Power to Gas (PtG) system are simulated: −5%, +5% and −30 % molar flow rate of incoming hydrogen, compared to steady conditions used in the preliminary design of the equipment. The study highlights how the cooled reactor configuration is more performing and characterized by a lower number of reactors in series (2 reactors) when compared to the adiabatic configuration (5 reactors). Furthermore, in the cooled reactor configuration the control system is able to respond more quickly to load variations compared to that designed for the adiabatic case, although the latter is mostly adopted from the industrial viewpoint due to temperature control issues. Moreover, the control system manages to respond to load variations by bringing the values of interest (gas grid residual concentration of hydrogen and carbon dioxide, Wobbe index) into the target intervals.

Energy-efficient conversion of green hydrogen and carbon dioxide to methane

The calculation and experimental study of reactive sorption enhanced steam reforming of modeled biogas for hydrogen production

Optimization of the Ex Situ Biomethanation of Hydrogen and Carbon Dioxide in a Novel Meandering Plug Flow Reactor: Start-Up Phase and Flexible Operation

Bioconversion of carbon dioxide to methane using hydrogen and hydrogenotrophic methanogens

Improved biological methanation using tubular foam-bed reactor

Carbon Utilization Through Power to Gas and Oxyfuel Combustion Hybridization with Recycled CO2: Design and Preliminary Results

Exploring the potential of biological methanation for future defossilization scenarios: Techno-economic and environmental evaluation

Power-to-Gas: The role of chemical storage in an energy system with high shares of renewable energy

Power-to-Gas: Process analysis and control strategies for dynamic catalytic methanation system

Integrated biogas upgrading and hydrogen utilization in an anaerobic reactor containing enriched hydrogenotrophic methanogenic culture.

An overview of biomethanation and the use of membrane technologies as a candidate to overcome H 2 mass transfer limitations

Continuous Biological Ex Situ Methanation of CO2 and H2 in a Novel Inverse Membrane Reactor (IMR)

RESEARCH OF METHANE PRODUCTION PROCESS FROM BIOGAS AND PYROLYSIS GAS

A System for the Combined Carbon Capture and Utilization to Produce Renewable Methanol from Biogas

Biological upgrading of biogas assisted with membrane supplied hydrogen gas in a three-phase upflow reactor

Direct biogas reforming to turquoise H 2 and carbon material in a catalytic fluidised-bed reactor

Power and biogas to methanol – A techno-economic analysis of carbon-maximized green methanol production via two reforming approaches

Bi-reforming of Methane in a Carbon Deposit-Free Plasmatron with High Operational Adaptability

Flue-to-fuel: Bio-integrated carbon capture and utilization of dilute carbon dioxide gas streams to renewable methane

Hydrogen production from biomass through integration of anaerobic digestion and biogas dry reforming

Sustainable Biomethanol and Biomethane Production via Anaerobic Digestion, Oxy-Fuel Gas Turbine and Amine Scrubbing CO2 Capture