Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The growing use of aluminum in a variety of industries is driving technologists to create practical and effective techniques and processes for joining aluminum alloys. The main aim of this artifact is to critically review and examine the maturity of welding for comparable and differing materials and also for cladding using Cold Metal Transfer. CMT, which stands for Cold Metal Transfer in the acronym, is a modified MIG welding technique. The CMT and its modes are used in similar and dissimilar welding of Al as well as its alloys of 2xxx, 5xxx, 6xxx, and 7xxx series, and with other materials is discussed in detail and compared with other joining methods. The recent advancements in this field with enhanced mechanical properties of Al alloys, as well as high-performance welding techniques, are discussed in this article. The mechanical and microstructural properties of weld like weld strength, microhardness, corrosion behavior, surface morphology, ductility, and fracture mechanism were used to assess the efficiency of the weld. The following aspects of weld bead surface consistency are investigated in terms of bead uniformity along the welding path, bead surface smoothness, and spattering strength. The effort is made to conclude the welding system which is free from all welding flaws, like gas porosity, spattering, and intermetallic formation, resulting in welded joints with the highest mechanical properties. CMT as an advanced welding approach has gained a significant attraction from researchers in investigating it for the cladding process. The geometric and microstructural properties of a clad-like microhardness assessment, and corrosion resistance analyses were used to evaluate the applicability of CMT in the cladding process.

Structural Analysis for Joining Dissimilar Thin Sheets with CMT (Cold Metal Transfer) Process

Joining dissimilar metals using cold metal transfer process: a review

A comprehensive survey on the cold metal transfer process in welding similar and dissimilar materials and for cladding

Interface Microstructure and Mechanical Property of CMT Welding-Brazed Joint Between Aluminum and Galvanized Steel Sheet

CMT welding-brazing of al/steel dissimilar materials using cycle-step mode

CMT Joining of AA6061-T6 and AA6082-T6 and Examining Mechanical Properties and Microstructural Characterization

Brief Review on Dissimilar Welding Using Cold Metal Transfer

Interfacial phenomena of cold metal transfer (CMT) welding of zinc coated steel and wrought aluminium

Experimental Investigation Of Joining The Metal/Polymer/Metal Composite Sheets By Clinching Method

Influence of Different Process Parameters on Microstructural and Mechanical Properties of Cold Metal Transfer Joining of DP 600 Steel and Al 5052 Alloy

The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel

MIG and CMT brazing of aluminum alloys and steel: A review

Calculation of the Intermetallic Layer Thickness in Cold Metal Transfer Welding of Aluminum to Steel

The Joining Behavior of Titanium and Q235 Steel Joined by Cold Metal Transfer Joining Technology

Microstructure and Properties of Dissimilar Butt Joints of Aluminum to Copper by Cold Metal Transfer with Preheating

Analisis Pengujian Tarik dan Sebaran unsur pada Pengelasan Aluminium – Mild Steel menggunakan Metode Cold Metal

Cold Metal Transfer Spot Joining of Aa6061-T6 to Galvanized Dp590 under Different Modes

Microstructural Evolution and Mechanical Properties of Ti Alloy/Stainless Steel Lap Joints during Cold Metal Transfer Technique with CuSi3 Filler Wire

Microstructures and Properties of Aluminum–Copper Lap‐Welded Joints by Cold Metal Transfer Technology

Optimisation of the Heterogeneous Joining Process of AlMg3 and X2CrNiMo17-12-2 Alloy by FSW Method

Aluminum alloy and galvanized steel CMT weld joints for lightweight automobile applications