Abstract:Previously reported staggered double vane (SDV) slow wave structure (SWS) traveling wave tube (TWT) gave electron efficiency as low as 3.4% at 220 GHz, which needs to be improved.One easy method to improve the electron efficiency and the output power is to reuse the spent electron beam energy, by resynchronizing electron velocity to the phase velocity of the terahertz (THz) signal at the second section of the TWT.In this article, we have modified the pitch of the SWS to realize the tapered phase velocity, which is for the first time, to our knowledge, applied to the SDV SWS at 220 GHz.By varying the geometry configuration, an optimized structure of tapered pitch SWS has been successfully developed.The results reported in this paper show a significant improvement of the output power, gain and electron efficiency.At 220 GHz, the output power has increased by about 65% with respect to the previous reported value reaching 111 W, and the electron efficiency has improved from 3.4% to 5.6%.In order to simplify the microfabrication process, an input/output coupler with E-plane bending has been designed, which can be fabricated by using only one mask UV-LIGA process. INTRODUCTIONWide-band high-power terahertz (THz) radiation sources developed by the vacuum electronics technology are attractive for many applications, such as high-data-rate communication, imaging and space applications [1][2][3][4].Traveling-wave tube (TWT) is one of the most important THz wave vacuum electronics devices due to its outstanding performance in bandwidth, power capacity (power per volume) and high output power.As the core part, a slow-wave structure (SWS) critically determines the performance of the TWT.In recent years, some studies have focused on staggered double vane (SDV) SWS in the terahertz and millimeter wave TWTs and back wave oscillators (BWOs) [5][6][7], which has a sheet electron beam tunnel.As well known, the sheet beam can theoretically provide a large current with small space charge field owing to the beam horizontal extensibility, which enables the TWT to generate high power for both millimeter and terahertz radiations [8,9].The SDV SWS was first designed by Shin et al. with operating voltage of 20 kV and current of 250 mA.They achieved an output power of 150 W at 220 GHz, but the current density was as high as 357 A/cm 2 , which is very difficult to be focused over a long distance of the tube.So, their sheet beam transmission was only about 73.6% [10-12], while the electron efficiency was only about 3%.Recently, Shi et al. improved the performance of the 220 GHz SDV TWT by introducing a newly designed periodical cusped magnet (PCM) system [13].With a current density of 200 A/cm 2 , a 100% sheet beam transmission was achieved in a 75 mm length drift tube.The output power was 67.28 W with the operating voltage of 25 kV and beam current of 80 mA.

Investigation of High Interaction Efficiency of Sheet Beam TWT Based on All-Period Optimization and Beam Bunching Analysis

Study on Efficiency-Enhancing Mechanism for SB TWT by Evenly Distributing SWS Impedance

A High-Power Sheet Beam Slow-Wave Structure of Traveling Wave Tubes

Beam-Wave Interaction and Electron Optical System Investigation for a W-Band Planar TWT

Enhancing Broadband Helix TWT Performance Using Hollow Electron Beam

Achieving Ultra-Wide Band Operation of the High-Power Sheet Beam TWT by Using Novel Double-Ridge Staggered Vane Structure

Study on Wideband Sheet Beam Traveling Wave Tube Based on Staggered Double Vane Slow Wave Structure

Square- and Rectangular-Ring Vertex-Bar Slow Wave Structures for High-Efficiency Wide Bandwidth TWTs

Investigation on Self-Excited Oscillation for Nonuniform Periodic Sheet Beam Traveling-Wave Tubes

PIC Simulation and Preliminary Experiment on a G-band Sheet Beam Traveling-Wave Tube

Study on an X-Band Sheet Beam Meander-Line SWS

An Elliptical Beam-Tunnel Sine Waveguide Slow Wave Structure for G-band Elliptical Beam Traveling Wave Tube

Investigation of Half Rectangular-Ring Helix Slow Wave Structure for W-Band Wide Bandwidth High-Efficiency TWTs

HIGH EFFICIENCY AND HIGH POWER STAGGERED DOUBLE VANE TWT AMPLIFIER ENHANCED BY VELOCITY-TAPER DESIGN

Design and Analysis of an Overmoded Slow Wave Structure for High Power Terahertz BWO

Research on W Band Step-Type Staggered Double Vane Slow Wave Structure Traveling Wave Tube

Study on the Ridge Loaded Azimuthal Supported Angular Log-Periodic Strip Meander Line Slow Wave Structure

An Arbitrary Staggered Multi-Vane Traveling Wave Tube Driven by Double Sheet Electron Beams

Study of A Log-Periodic Slow Wave Structure for Ka-Band Radial Sheet Beam Traveling Wave Tube

Design and microwave test of an ultrawideband input/output structure for sheet beam travelling wave tubes

Ka-band Dual Sheet Beam Traveling Wave Tube Using Supported Planar Ring-Bar Slow Wave Structure