Abstract:The zero-sequence loop inherently exists in the structure of the three-phase open-end winding permanent-magnet synchronous machine (OW-PMSM) system with common dc bus, which provides the circulating path for zero-sequence current (ZSC) and consequently causes the torque ripple and extra system loss. Besides, the common-mode voltage (CMV), which can cause many negative effects, such as the bearing current and the failure of motor bearing, is another concern in the driving system. However, the simultaneous suppression of ZSC and the CMV control of the devices is investigated mainly in the application of the induction machine system and the multiphase OW-PMSM system, whereas it is ignored in the application of the three-phase OW-PMSM system, in which the suppression of ZSC is more complex considering the effect of flux linkage harmonic components. On this basis, this article proposes a strategy that can not only suppress the ZSC, but also eliminate the ripple of CMV in the three-phase OW-PMSM system. In the proposed method, the suppression of ZSC is achieved by synchronously adjusting the duration time of each phase within every control cycle based on the reference voltage of zero-sequence control loop, which can simplify the conventional rearrangement-based scheme. Furthermore, the duration time of each phase is distributed into each switch device of the two inverters, with the principle of eliminating the ripple of CMV. Consequently, both the suppression of ZSC and the CMV control can be achieved easily. Furthermore, the influence of dead time on the CMV control is analyzed, indicating that the CMV control is irrelevant with the dead time. Moreover, the effective modulation range of the proposed technique is analyzed. Finally, the experimental validation is conducted on a three-phase OW-PMSM system with common dc bus.

Comprehensive Investigation of Overmodulation Methods with Low Current Distortion for Dual Three-Phase Motor Drives

Overmodulation Strategy for Seven-Phase Induction Motors with Optimum Harmonic Voltage Injection Based on Sequential Optimization Scheme

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

A Multipulse Pattern Modulation Scheme for Harmonic Mitigation in Three-Phase Multimotor Drives

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Current-balance Mode-based Unified Common-Mode Voltage Elimination Scheme for Dual Three-Phase Motor Drive System

Research on Techniques of Three-level Six-phase Synchronous Motor Driver

Air-gap and Yoke Flux Density Optimization for Multiphase Induction Motor Based on Novel Harmonic Current Injection Method

Computationally Efficient Overmodulation Methods for Synchronous Motor Drive Systems

Establishing Optimized Harmonic Injection Order of Sequential Overmodulation Strategies for Seven-Phase Induction Motors

An Overmodulation Method for PWM-Inverter-Fed IPMSM Drive with Single Current Sensor

Modified SVPWM technique for CMV reduction in asymmetrical dual three phase induction machine drive

Zero-Sequence Current Suppression Strategy with Common-Mode Voltage Control for Open-End Winding PMSM Drives with Common DC Bus

A Modulation Method to Eliminate Common-mode Voltage of Dual Three-Phase Motor

A Method Based on Phase-shifting Carrier for Reducing DC-link Current Harmonics in Dual Three-phase PMSM Drive under Open-phase Conditions

Integrated Control Strategy for Distortion Current Elimination of Fault-Tolerant Open-End Winding Permanent Magnet Synchronous Machine with Topology Reconfiguration

Four-Module Three-Phase PMSM Drive for Suppressing Vibration and Common-Mode Current

Model Predictive Current Control for Dual Three-Phase Permanent Magnet Synchronous Motor with Common-Mode Voltage Suppression

Comparative Study of Advanced Modulation and Control Schemes for Dual Three-Phase PMSM Drives with Low Switching Frequencies

Single Current Sensor Control for PWM Inverter Fed AC Motor Drives under Over-Modulation Mode

Design and Analysis of Universal Natural Fault-Tolerant SVPWM Strategy With Simplified Fault Diagnosis for Multiphase Motor Drives