Abstract:The zero-sequence loop inherently exists in the structure of the three-phase open-end winding permanent-magnet synchronous machine (OW-PMSM) system with common dc bus, which provides the circulating path for zero-sequence current (ZSC) and consequently causes the torque ripple and extra system loss. Besides, the common-mode voltage (CMV), which can cause many negative effects, such as the bearing current and the failure of motor bearing, is another concern in the driving system. However, the simultaneous suppression of ZSC and the CMV control of the devices is investigated mainly in the application of the induction machine system and the multiphase OW-PMSM system, whereas it is ignored in the application of the three-phase OW-PMSM system, in which the suppression of ZSC is more complex considering the effect of flux linkage harmonic components. On this basis, this article proposes a strategy that can not only suppress the ZSC, but also eliminate the ripple of CMV in the three-phase OW-PMSM system. In the proposed method, the suppression of ZSC is achieved by synchronously adjusting the duration time of each phase within every control cycle based on the reference voltage of zero-sequence control loop, which can simplify the conventional rearrangement-based scheme. Furthermore, the duration time of each phase is distributed into each switch device of the two inverters, with the principle of eliminating the ripple of CMV. Consequently, both the suppression of ZSC and the CMV control can be achieved easily. Furthermore, the influence of dead time on the CMV control is analyzed, indicating that the CMV control is irrelevant with the dead time. Moreover, the effective modulation range of the proposed technique is analyzed. Finally, the experimental validation is conducted on a three-phase OW-PMSM system with common dc bus.

Current-balance Mode-based Unified Common-Mode Voltage Elimination Scheme for Dual Three-Phase Motor Drive System

Torque Ripple Suppression Control for Dual Three-Phase Permanent-Magnet Synchronous Motor

A Modulation Method to Eliminate Common-mode Voltage of Dual Three-Phase Motor

A Modified Carrier-Based PWM Strategy for Common Mode Voltage Elimination and Neutral Point Voltage Balance in a Unidirectional Three-Level Converter for AC Motor Drives

A Multipulse Pattern Modulation Scheme for Harmonic Mitigation in Three-Phase Multimotor Drives

Review on Pulse-Width Modulation Strategies for Common-Mode Voltage Reduction in Three-Phase Voltage-Source Inverters

Four-Module Three-Phase PMSM Drive for Suppressing Vibration and Common-Mode Current

Research of common-mode voltage elimination for open-end winding AC motor drive system

Model Predictive Current Control for Dual Three-Phase Permanent Magnet Synchronous Motor with Common-Mode Voltage Suppression

A Common-Mode Voltage Elimination Scheme by Reference Voltage Decomposition for Back-to-Back Two-Level Converters

A Method To Reduce Common-Mode Voltage Of Dual Three-Phase Motor Based On Tspwm

A Carrier-Based Pwm Method with Zero-Sequence Current Elimination for Multiphase Double-End Winding Drives

Zero-Sequence Current Suppression Strategy with Common-Mode Voltage Control for Open-End Winding PMSM Drives with Common DC Bus

A Simplified and Generalized SVPWM Scheme for Two-Level Multiphase Inverters With Common-Mode Voltage Reduction

Discontinuous PWM-based common-mode voltage suppression method for three-phase inverter

Direct Torque Control Schemes for Dual Three-Phase PMSM Considering Unbalanced DC-link Voltages

Modified SVPWM technique for CMV reduction in asymmetrical dual three phase induction machine drive

An active cancellation method for the common mode current of the three-phase PWM motor drives

Two Types of Common-Mode Voltage Suppression in Medium Voltage Motor Speed Regulation System Based on Solid State Transformer With Dual DC Bus

A new PWM strategy to reduce the common-mode voltage

A Dc Link Switch-Based Common Mode Voltage Reduction Scheme in Pwm Inverter Drives