Abstract:High-performance vertical vibration isolators are required in precision instruments and physical experiments to reduce the seismic noise, which limits the instrument performance and measurement results. For example, inertial references are needed in interferometric gravitational wave detectors and absolute gravimeters, in order to separate the useful signal from noise. Microseisms typically occur at around 0.07 Hz. The secondary microseisms occur at about 0.14 Hz. Buildings usually wobble at frequencies between 0.1 and 1 Hz. To reduce all these vibrations would require a spring-mass system with a resonance frequency lower than 0.05 Hz. The most commonly applied techniques use a passive vertical isolation system, which is easy to set up and cheap to build. However, to achieve low cut-off frequency, such as 0.05 Hz, there requires longer than 100 m static deflection for a simple passive isolator, which is impractical in most applications. An ultra-low-frequency active vertical vibration isolator, based on a two-stage beam structure, is proposed and demonstrated in this paper. Two beams are connected to a frame with flexural pivots. The upper beam is suspended from the frame with a normal hex spring. The lower beam is suspended from the upper one by a zero-length spring. The flexural pivots of the upper beam are not vertically placed above the pivots of the lower beam. With this special design, the attachment points of the zero-length spring to the beams can be moved to change the effective stiffness. A laser reflectometry is used to detect the angle between the two beams. A laser collimator, a mirror, a beam splitter and an optical detector are fixed to the upper beam, and another mirror is fixed to the lower beam. A laser beam from the collimator is directed to the detector via the mirrors and the beam splitter. The output of the detector is proportional to the angle between the two beams. The minimum detectable angle is 36 nrad. The angle signal is sent to a circuit to generate a control signal, which drives a voice coil mounted between the lower beam and the frame to maintain the angle between the two beams to a fixed value. The isolation system can achieve a natural period of 100 s by carefully adjusting the attachment points of the zero-length spring and the feedback parameters. This type of isolator has a simpler and more robust structure than the famous active vibration isolator-the super spring. The system is promising in applications such as precision instruments and experiments, especially in absolute gravimeters.

Active vibration isolation support platform for double crystal monochromator

Active Vibration Isolation of a Micro-Manufacturing Platform Based on a Neural Network

Bionic Design of Vibration Isolation System of Micro-manufacturing Platform

Hybrid Vibration Isolation in Electromagnetic Vibration Feeders

State Space Lqg-Based Active Microvibration Control Of Micro-Manufacturing Platform

Vibration Isolation Via A Scissor-Like Structured Platform

Active Low-frequency Vertical Vibration Isolation System for Precision Measurements

A compact actively damped vibration isolation platform for optical experiments in ultra-high vacuum

Design of a novel two-degree-of-freedom translational-rotation low-frequency vibration isolation platform

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

High performance passive vibration isolation system for optical tables using six-degree-of-freedom viscous damping combined with steel springs

Novel coarse and fine stage parallel vibration isolation pointing platform for space optics payload

Design Of An Active Low Frequency Vibration Isolation System For Atom Interferometry By Using Sliding Mode Control

Ultra-Low-Frequency Vertical Vibration Isolator Based on A Two-Stage Beam Structure

Control and experimental study of 6-DOF vibration isolation platform with magnetorheological damper

Investigation on a two-stage platform of large stroke for broadband vertical vibration isolation

Semi-active control of the electromagnetic negative stiffness mechanism in a double-layer vibration isolator

Micropositioning and microvibration isolation of a novel hybrid active–passive platform with two-axis actuator for optical payloads

System Integration and Control Design of a Maglev Platform for Space Vibration Isolation

Research on Active Vibration Isolation System of Sonar Platform

An adjustable anti-resonance frequency controller for a dual-stage actuation semi-active vibration isolation system