Abstract:The data from thermal simulation plays a significant role in understanding the deformation behavior and deformation mechanisms of materials, and provides guidance for the design of hot deformation processes. In this paper, thermal simulation experiments were performed on an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy, and the microstructure after hot deformation were characterized by Electron Backscatter Diffraction (EBSD) technique. The thermal simulation data and microstructural characteristics were analyzed and studied using machine learning technique: the Backpropagation Artificial Neural Network (BP-ANN) method, correlation analysis and K-means clustering analysis. A model for predicting not only flow stress but also dislocation density was established using the BP-ANN method, which exhibits good prediction accuracy. The R2 and AARE values are 90.19% and 6.87% for the prediction of dislocation density, and are 98.67% and 6.96% for the prediction of flow stress. Subsequently, correlation analysis was performed to investigate the relationship between energy dissipation efficiency η and deformation parameters as well as microstructural characteristics, revealing that energy dissipation rate is correlated positively with the content of dynamical recrystallization (DRX) and high angle grain boundary (coefficients of 0.90 and 0.82) and negatively with the dislocation density and the Zener-Hollomon parameter (coefficients of -0.98 and -0.97). Additionally, K-means clustering analysis was applied to study the relationship between the energy dissipation efficiency and softening mechanisms, it was found that the softening mechanisms changed with the variation of η value, dynamic recovery (DV), geometric DRX (GDRX) and continuous DRX (CDRX) dominated when η >0.38; DV, CDRX and discontinuous DRX(DDRX) dominated when 0.28< η <0.38; DV dominated when η <0.28. The results show that machine learning techniques are useful tools in mining thermal simulation data, and more information can be obtained than traditional data mining methods.

Predicting grain size-dependent superplastic properties in friction stir processed ZK30 magnesium alloy with machine learning methods

Excellent High‐Strain‐Rate Superplasticity of Fine‐Grained ZK60 Magnesium Alloy Produced by Submerged Friction Stir Processing

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

High Strain Rate Superplasticity in Al-Zn-Mg-Based Alloy: Microstructural Design, Deformation Behavior, and Modeling

Developing superplasticity in a magnesium AZ31 alloy by ECAP

Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system

Analysis of high-temperature deformation and microstructure of an AZ31 magnesium alloy

Room-Temperature Superplasticity in an Ultrafine-Grained Magnesium Alloy

Superplasticity of fine-grained Mg-10Li alloy prepared by severe plastic deformation and understanding its deformation mechanisms

Application Status and Prospects of Friction Stir Processing in Wrought Magnesium Alloys: A Review

Microstructural evolution and dynamic recrystallization model of extruded homogenized AZ31 magnesium alloy during hot deformation

Machine Learning Prediction of Aluminum Alloy Stress–Strain Curves at Variable Temperatures with Failure Analysis

Achieving high strain rate superplasticity in an Al-Cu-Li alloy processed by thermo-mechanical processing

Predicting Flow Stress Behavior of an AA7075 Alloy Using Machine Learning Methods

Room Temperature Strengthening and High-Temperature Superplasticity of Mg-Li-Al-Sr-Y Alloy Fabricated by Asymmetric Rolling and Friction Stir Processing

Study on hot deformation behavior and recrystallization mechanism of an Al-6.3Zn-2.5Mg-2.6Cu-0.11Zr alloy based on machine learning

Machine learning-assisted constitutive modeling of a novel powder metallurgy superalloy

Modeling of hot deformation behavior and prediction of flow stress in a magnesium alloy using constitutive equation and artificial neural network (ANN) model

Influence of ECAP Parameters on the Structural, Electrochemical and Mechanical Behavior of ZK30: A Combination of Experimental and Machine Learning Approaches

Microstructural evolution and constitutive analysis of Al-Mg-Zn-Er-Zr based on arrhenius-type and machine-learning algorithm

Study on Thermal Compression Deformation Behavior and Constitutive Model of Homogenized Mg–5Zn–1Mn Alloy