Abstract:In this article, we present a novel solid biopolymer-based membrane (BPM) with sodium alginate (SA) as host material incorporated with an ionic salt, lithium chloride (LiCl). Solid BPMs are prepared using the solution casting technique and used as an electrolyte in the fabrication of solid-state Li-ion conducting battery and coin cell. The X-ray diffraction (XRD) method has been carried out to analyze the crystalline/amorphous nature of the membrane. A Fourier transform infrared spectroscopy (FTIR) study is done to confirm the complex formation between the host biopolymer and salt. The ionic conductivity of all prepared BPMs is measured using AC impedance analysis, and the membrane with the composition of 15 mol% of SA:85 mol% of LiCl exhibits a high ionic conductivity of 3.06 × 10 −2 S/cm. The glass transition temperature ( T g ) of the prepared BPMs is examined using differential scanning calorimetry (DSC), and the membrane of 15 mol% of SA:85 mol% of LiCl exhibits a decreased T g value of 54.33 °C. The thermal stability of the prepared membranes is studied using thermogravimetric analysis (TGA). Transference number measurement (TNM) is made to assure that the major charge carriers involved in transportation are ions. Using the highest ion conducting membrane as an electrolyte, a primary Li-ion conducting battery has been fabricated which results in an OCV of 1.91 V, and various loads are connected to observe the corresponding current drawn from the cell. A coin cell is constructed with the configuration of graphite (G) + tannic acid || 15 mol% of SA:85 mol% of LiCl || LiFePO 4 + G + pinch of highest ion conducting membrane, and the galvanostatic charge–discharge (GCD) analysis is carried out to analyze the rechargeable nature of the prepared membrane and the performance of the coin cell, whereas the cell has undergone charge/discharge process for 200 cycles and resulted with an energy density of 13.94 Wh/Kg, power density of 1111.11 W/Kg, and specific capacitance of 100.40 F/g, respectively. Graphical

Application of sodium alginate in Li-ion battery

Sodium Alginate Enabled Advanced Layered Manganese-Based Cathode for Sodium-Ion Batteries.

Sodium Alginate Binders for Bivalency Aqueous Batteries

Novel alginate-based binders for silicon–graphite anodes in lithium-ion batteries: effect of binder chemistry on the electrochemical performance

Performance study of sodium alginate (SA) with lithium chloride (LiCl)-based solid-state membrane as an electrolyte in electrochemical device application

Sulfated Alginate as an Effective Polymer Binder for High-Voltage LiNi0.5Mn1.5O4 Electrodes in Lithium-Ion Batteries

Investigations on Na-ion conducting electrolyte based on sodium alginate biopolymer for all-solid-state sodium-ion batteries

Rheological Properties of Aqueous Sodium Alginate Slurries for LTO Battery Electrodes

The effect of using alternative binders and second life graphite materials on the electrochemical performance of lithium-ion battery electrodes

Preparation of an Amorphous Cross-Linked Binder for Silicon Anodes

Exploring the feasibility of sodium alginate as a binder in aqueous zinc-ion batteries incorporating α-MnO 2 nanorod cathodes

Hydrophilic Binder Interface Interactions Inducing Inadhesion and Capacity Collapse in Sodium-Ion Battery

A Lignosulfonate Binder for Hard Carbon Anodes in Sodium-Ion Batteries: A Comparative Study

Alginate-Xylan Biopolymer as a Multifunctional Binder for 5 V High-Voltage LNMO Electrodes.

Cross‐Linked Sodium Alginate as A Multifunctional Binder to Achieve High‐Rate and Long‐Cycle Stability for Sodium‐Ion Batteries

All alginate-derived high-performance T-Nb 2 O 5 /C//seaweed carbon Li-ion capacitors

Cross-Linked Sodium Alginate–Sodium Borate Hybrid Binders for High-Capacity Silicon Anodes in Lithium-Ion Batteries

L-Cysteine Cross-Linked Sodium Alginate As a Binder with Strong Binding Force on Copper Foils to Enhance Sodium Storage Performance

A High-Performance Alginate Hydrogel Binder for Aqueous Zn-ion Batteries.

Aqueous Binders Compatible with Ionic Liquid Electrolyte for High-Performance Aluminum-Ion Batteries

Small Things Make a Big Difference: Conductive Cross-Linking Sodium Alginate@MXene Binder Enables High-Volumetric-Capacity and High-Mass-Loading Li-S Battery