Abstract:5 V-class LiNi0.5Mn1.5O4 (LNMO) cathode material is emerging as a promising cobalt-free alternative to meet the growing demand for affordable, high-performance lithium-ion batteries (LIBs). However, LNMO faces significant electrochemical challenges, particularly interfacial instability with commercial electrolytes due to its high operating potentials. This instability leads to the dissolution of transition metals and consequently electrode crosstalk, which severely deteriorates electrochemical performance. Surface coating is extensively investigated to reduce interfacial side reactions for enhanced cycling stability. Traditional methods typically require multiple steps, including dispersion, mixing, drying, and calcination, which can be time-consuming and complex. Additionally, the resulting ceramic coatings are often rigid and unevenly distributed due to lattice mismatches, potentially leading to poor interfacial contact and increased resistance. In this study, tetraethyl orthosilicate (TEOS) is proposed as a streamlined slurry additive to in situ form an ethoxy-functional polysiloxane (EPS) film on the surface of LNMO particles during electrode preparation. Post-mortem X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma (ICP) analyses reveal the crucial role of the EPS film in addressing interfacial instability issues. First, the EPS film serves as an artificial cathode-electrolyte interface (CEI) with a robust Si―O―Si bonding network, which is less vulnerable under high potentials. Second, the remaining ethoxy-functional groups in EPS scavenge HF by forming stable Si―F bonds, thereby suppressing the detrimental transition metal dissolution and crosstalk. Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) further confirm the stability of the EPS film and the enhanced structural stability of the modified LNMO. Galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS) results demonstrate that EPS reduces the overall impedance and improves ion diffusion kinetics by forming stable electrode-electrolyte interfaces. As a result, compared to the baseline, the optimized LNMO cathode exhibits significantly improved cycling stability in both half cells (84.6% vs. 51.4% capacity retention after 1000 cycles) and full cells when paired with commercial graphite anodes (83.3% vs. 53.4% retention after 500 cycles). This strategy, further validated under elevated temperatures of 50 °C and in pouch-type cells, is expected to pave the way for the development of next-generation high-performance LIBs.

Sulfated Alginate as an Effective Polymer Binder for High-Voltage LiNi0.5Mn1.5O4 Electrodes in Lithium-Ion Batteries

Alginate-Xylan Biopolymer as a Multifunctional Binder for 5 V High-Voltage LNMO Electrodes.

Ultra‐Low Alginate‐Based Multifunctional Composite Binders for Enhanced Mechanical, Electrochemical, and Thermal Performance of Li–S Batteries

Electrochemical study on nickel aluminum layered double hydroxides as high-performance electrode material for lithium-ion batteries based on sodium alginate binder

Investigation of Water-Soluble Binders for LiNi0.5 Mn1.5 O4 -Based Full Cells

A High-Performance Alginate Hydrogel Binder for Aqueous Zn-ion Batteries.

Sodium Alginate Enabled Advanced Layered Manganese-Based Cathode for Sodium-Ion Batteries.

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries

Rational design of robust and universal aqueous binders to enable highly stable cyclability of high‐capacity conversion and alloy‐type anodes

Sodium Alginate Binders for Bivalency Aqueous Batteries

Constructing a Binderless Carbon-Coated In2O3 Anode for High-Performance Lithium-Ion Batteries

A Lignosulfonate Binder for Hard Carbon Anodes in Sodium-Ion Batteries: A Comparative Study

Li0.5PAA domains filled in porous sodium alginate skeleton: A 3D bicontinuous composite network binder to stabilize micro-silicon anode for high-performance lithium ion battery

Polyacrylonitrile Based Triblock Copolymer Binder Enabling Excellent Performance toward LiNi 0.5 Mn 1.5 O 4 and Sulfur Based Batteries

Tailoring Electrode-Electrolyte Interfaces Via a Simple Slurry Additive for Stable High-Voltage Lithium-Ion Batteries

Aqueous Binders Compatible with Ionic Liquid Electrolyte for High-Performance Aluminum-Ion Batteries

Novel alginate-based binders for silicon–graphite anodes in lithium-ion batteries: effect of binder chemistry on the electrochemical performance

Stabilizing Zn2SiO4 Anode by a Lithium Polyacrylate Binder for Highly Reversible Lithium-Ion Storage.

Regulating the Molecular Interactions in Polymer Binder for High-Performance Lithium–Sulfur Batteries

Highly Elastic Block Copolymer Binders for Silicon Anodes in Lithium-Ion Batteries

Toward Greener Lithium-Ion Batteries: Aqueous Binder-Based LiNi0.4Co0.2Mn0.4O2 Cathode Material with Superior Electrochemical Performance