Abstract:This study concentrates on the dynamic damage analysis of high‐temperature rocks subjected to different thermal shocks. Then the specimens were grouped and heated to 200°C, 400°C, 600°C, and 800°C, then were cooled by natural, water, and liquid nitrogen cooling. Ultrasonic detector tests, the split Hopkinson pressure bar experiments, and scanning electron microscope tests of the high‐temperature granite specimens under different cooling methods were conducted. The change in mechanical properties of high‐temperature rock after cooling treatments is getting increasing attention. However, only a few studies have been conducted on the dynamic characteristic parameters. Therefore, this study aims to perform a dynamic damage analysis of high‐temperature rocks subjected to different thermal shocks. Accordingly, the specimens were grouped and heated to 200°C, 400°C, 600°C, and 800°C, and they were cooled by natural, water, and liquid nitrogen cooling. Ultrasonic detector tests, the split Hopkinson pressure bar experiments, and scanning electron microscope tests of the high‐temperature granite specimens were conducted using different cooling methods. Subsequently, the change rules of dynamic stress–strain curves and properties were calculated, and the morphology and micromorphology of fragments were compared. Based on the outcomes, the thermal shock damage and impact damage evolution were evaluated and quantified. The findings revealed that when the treatment temperature increases, the dynamic peak stress and elastic modulus decrease, while the peak strain increases, and the effect of rapid cooling was more significant in the influence of rock dynamic characteristics. Moreover, when the damage factor is more than 0.51, the change of dynamic stress‐strain is accelerated, leading to the instability of the structure under the impact load. The research results are expected to provide an adequate theoretical basis for the development and utilization of geothermal resources and underground engineering applications.

Evaluating the thermal-cooling induced effects on the Ambela granite properties (from Pakistan) using experimental and image processing techniques

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Investigation of the effects of two different cooling treatments on the physico-mechanical and microstructural properties of granite after high temperatures

Cracking process and microstructural characteristics of granite under heating–cooling alternations

Analysis of physical and mechanical properties of granite under different cooling methods under high-temperatures thermal cycles

Impacts of different cooling methods on the dynamic tensile properties of thermal-treated granite

Thermal Damage Evolution of Granite under Different Thermal Conditions Based on Two-Scale Tessellation Via Discrete Element Method

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Influence of Cooling Speed on the Physical and Mechanical Properties of Granite in Geothermal‐related Engineering

Structural Properties and Failure Characteristics of Granite after Thermal Treatment and Water Cooling

Experimental Study on the Damage and Failure Characteristics of High-Temperature Granite after Liquid-Nitrogen Cooling

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Multiscale damage and thermal-stress evolution characteristics of rocks with thermal storage potential under thermal shocks

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Grain-based Coupled Thermo-Mechanical Modeling for Stressed Heterogeneous Granite under Thermal Shock

Experimental investigation on physical and tensile mechanical properties of granite after different heating/cooling treatments

Thermally Induced Variation of Primary Wave Velocity in Granite from Yantai: Experimental and Modeling Results

Mechanical test of granite with multiple water–thermal cycles