Abstract:Hot rolling of steels represents one of the most critical steps to achieve finished products with high surface quality. The increasing productivity added to the rising customer requirements result in more and more severe scheduling rules for the HSM. Strip surface aspect is very important in terms of HSM operation costs and productivity limitation. Among all surface defects, the most crippling comes from the oxide scale formed at the surface of the steel during the hot rolling, at the entry of the finishing mill (last part of the hot strip mill): the secondary scale, mechanical behaviour of which is still poorly known. The secondary scale may fracture under the stresses imposed by the successive rolling passes, and can be embedded in the steel strip surface: this defect is called "rolled-in scale defect". In addition, the extrusion of the subjacent metal inside the oxide cracks induces large local modifications of friction and heat transfer conditions. Consequently, a precise description of oxide scale deformation mechanisms is necessary to better define the boundary conditions in a roll bite and to better understand the initiation mechanisms of rolled-in scale defects. Our scientific objective is then to provide a realistic physical and numerical model to simulate the oxide scale flow in the roll bite and in particular, its damage. After the presentation of the industrial process and the context of this study, the physical and mechanical properties of the oxide scale in the finishing mill are investigated. We introduce the Forge2® finite element software, selected for this study to simulate the oxide scale behaviour in a finishing mill stand. The numerical developments performed to simulate the different kinds of oxide damage are described. Three mechanical tests have been selected to approach the solicitations undergone by the oxide scale at the entry of the roll gap, suspected to be critical for damage: the 4-point hot bending test, the hot tension test and the hot plane strain compression test. A numerical study is performed in parallel. Based on constitutive data obtained from these three mechanical tests, the mechanical description of a rolling stand is sufficient for satisfactory simulation of the industrial process.

Rolling Release Siege Engines: Teaching an Old Machine a New Trick

The swinging counterweight trebuchet. On scaling and optimization

Design and Evaluation of a Novel Self-Locking Quick Release Mechanism Featured by Heavy Load, Fast Response, and High Security

Wheeled Robots playing Chain Catch: Strategies and Evaluation

Replicating the rolling-sliding dynamics of cam-roller contacts in large-scale hydraulic drivetrains: A small-scale approach

Rolling pairs with shifting contact geometry: Design, development, and validation

Dynamics of a medieval missile launcher: the trebuchet

Design and Locomotion Analysis of a Novel Modular Rolling Robot

The Enfield Lock Barrel Mill of 1815 and Moves to Replace Musket Barrel Grinding by Turning c1780 to c1840

Research on a new hydraulic rolling shear shearing mechanism and its control system

A review of planetary roller screw mechanism for development and new trends

Design and Motion Analysis of a Reconfigurable Pendulum-Based Rolling Disk Robot with Magnetic Coupling

Configuration and kinematics analysis of locking-releasing mechanism for side-loaded lunar rover

Design and motion analysis of a new wheeled rolling robot

Performance Analysis of New One-Piece Iron Roughneck and Its Spinning Mechanism

The Gun and Corsia of Early Modern Mediterranean Galleys: Design issues and rationales

Kinematics and Performance Analysis of a Deployable 7R Overconstrained Single-Loop Mechanism for Aerospace Platform

Experimental study and numerical simulation of iron oxide scales mechanical behavior in hot rolling

Egyptian Ratscrew: Discovering Dominant Strategies with Computational Game Theory

Investigation on the Backlash of Roller Enveloping Hourglass Worm Gear: Theoretical Analysis and Experiment

Design and analysis of a hexagon rolling mechanism with a center-arranged actuator