Abstract:This study theoretically investigates the temperature and velocity spatial distributions in the flow of a copper–water nanofluid induced by a rotating rigid disk in a porous medium. Unlike previous work on similar systems, we assume that the disk surface is well polished (coated); therefore, there are velocity and temperature slips between the nanofluid and the disk surface. The importance of considering slip conditions in modeling nanofluids comes from practical applications where rotating parts of machines may be coated. Additionally, this study examines the influence of heat generation on the temperature distribution within the flow. By transforming the original Navier–Stokes partial differential equations (PDEs) into a system of ordinary differential equations (ODEs), numerical solutions are obtained. The boundary conditions for velocity and temperature slips are formulated using the effective viscosity and thermal conductivity of the copper–water nanofluid. The dependence of the velocity and temperature fields in the nanofluid flow on key parameters is investigated. The major findings of the study are that the nanoparticle volume fraction significantly impacts the temperature distribution, particularly in the presence of a heat source. Furthermore, polishing the disk surface enhances velocity slips, reducing stresses at the disk surface, while a pronounced velocity slip leads to distinct changes in the radial, azimuthal, and axial velocity components. The study highlights the influence of slip conditions on fluid velocity as compared to previously considered non-slip conditions. This suggests that accounting for slip conditions for coated rotating disks would yield more accurate predictions in assessing heat transfer, which would be potentially important for the practical design of various devices using nanofluids.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is related to the heat transfer characteristics of copper - water nanofluids when flowing in the porous medium generated by a rotating rigid disk. Specifically, the researchers are concerned with: 1. **Influence of slip conditions**: Different from the traditional assumptions, this paper considers the cases of velocity slip and temperature slip between the nanofluid and the disk surface after the disk surface is polished. Such slip conditions are very important in practical applications. For example, the rotating parts of machines may be covered with coatings. Therefore, understanding the influence of slip conditions on fluid flow and heat transfer is of great significance. 2. **Influence of heat generation**: The research also explores the influence of heat generation on the temperature distribution. By introducing the heat generation term, the researchers can more comprehensively analyze the heat transfer behavior of nanofluids in porous media. 3. **Influence of nanoparticle volume fraction**: The researchers examine the influence of nanoparticle volume fraction on the temperature and velocity distributions. In particular, in the presence of a heat source, the nanoparticle volume fraction significantly affects the temperature distribution. 4. **Influence of porous media**: The researchers also consider the influence of the uniformity of porous media on fluid flow and heat transfer. By changing the porosity parameters of porous media, the researchers can evaluate the specific influence of porosity on the fluid temperature and velocity distributions. ### Main findings - **Nanoparticle volume fraction**: The nanoparticle volume fraction significantly affects the temperature distribution, especially in the presence of a heat source. - **Surface polishing**: Polishing the disk surface can enhance the velocity slip and reduce the stress on the disk surface. - **Velocity slip**: Obvious velocity slip will lead to significant changes in the radial, circumferential and axial velocity components. - **Importance of slip conditions**: Compared with the traditional non - slip conditions, considering slip conditions is more accurate for evaluating heat transfer, which is especially important when designing various devices using nanofluids. ### Application prospects The results of this research may be applied in fields such as turbine engineering, rotor - stator systems, rotating air filters, chemical engineering, centrifugal pumps and aerospace engineering, especially in cases where rotating disk coatings are involved in these fields.

Analysis of Heat Transfer for the Copper–Water Nanofluid Flow through a Uniform Porous Medium Generated by a Rotating Rigid Disk

Analysis of Error and Stability of Nanofluid over Horizontal Channel with Heat/Mass Transfer and Nonlinear Thermal Conductivity

Numerical Analysis of Thermal Radiative Maxwell Nanofluid Flow Over-Stretching Porous Rotating Disk

Numerical analysis of heat transfer and friction drag relating to the effect of Joule heating, viscous dissipation and heat generation/absorption in aligned MHD slip flow of a nanofluid

Thermal analysis of nanofluid magnetic flow on a rotating disk in the presence of radiation considering response surface method

Agrawal Axisymmetric Rotational Stagnation-Point Flow of a Water-Based Molybdenum Disulfide-Graphene Oxide Hybrid Nanofluid and Heat Transfer Impinging on a Radially Permeable Moving Rotating Disk

The parametric study of hybrid nanofluid flow with heat transition characteristics over a fluctuating spinning disk

Particle swarm optimization based numerical study for pressure, flow, and heat transfer over a rotating disk with temperature dependent nanofluid properties

Heat transfer analysis in magnetohydrodynamic nanofluid flow induced by a rotating rough disk with non-Fourier heat flux: aspects of modified Maxwell-Bruggeman and Krieger-Dougherty models

Significance of non-uniform heat source/sink and cattaneo-christov model on hybrid nanofluid flow in a Darcy-forchheimer porous medium between two parallel rotating disks

Numerical and statistical analyses of three-dimensional non-axisymmetric Homann's stagnation-point flow of nanofluids over a shrinking surface

Thermophoretic particle deposition in a nanofluid flow across a disc with non-fourier heat flux: An investigation using tangent hyperbolic model

The electrically conducting water-based nanofluid flow containing titanium and aluminum alloys over a rotating disk surface with nonlinear thermal radiation: A numerical analysis

Heat and mass transfer together with hybrid nanofluid flow over a rotating disk

Analysis of mixed convective thermal slip flow with nanofluid mixtures over a curved surface

Thermal radiation and heat source/sink influence on MHD heat transmission of copper (Cu)–aluminum oxide (Al2O3) Hybrid nanofluid flow with velocity and thermal slips along a stretching sheet

Computational analysis of radiative engine oil-based Prandtl–Eyring hybrid nanofluid flow with variable heat transfer using the Cattaneo–Christov heat flux model

Impact of hall and ion slip in a thermally stratified nanofluid flow comprising Cu and Al2O3 nanoparticles with nonuniform source/sink

Impact of autocatalytic chemical reaction in an Ostwald-de-Waele nanofluid flow past a rotating disk with heterogeneous catalysis

Numerical simulation of heat and mass transfer in magnetic nanofluid flow by a rotating disk with variable fluid properties

A comparative analysis of spherically and cylindrically shaped nanoparticles containing nanofluid flows over a permeable rotating disk affected by nanoparticles radius and nanolayer