Abstract:Ceramic materials with low thermal conductivity are critically important in applications such as thermoelectric conversion and thermal barrier coatings. Introducing the concept of entropy and its singular physical properties permits attainment of low thermal conductivity in ceramics, and the high-pressure synthesis conditions can also reduce the thermal conductivity of the synthesized samples by adjusting the micro-morphology. In this work, high-entropy (Sr0.2La0.2Nd0.2Sm0.2Eu0.2)TiO3 ceramics were synthesized by solid-state reaction at high temperature and high pressure, which significantly shortened the synthesis time. X-ray diffraction (XRD) results affirmed that high-entropy cubic perovskite ceramics can be synthesized using high temperature and high pressure. High-resolution transmission electron microscopy (HRTEM) results show that the multi-component cations are uniformly distributed at the A-site. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results show that the pressure provided by the synthesis method can effectively adjust the microstructure of the synthesized samples. Ultra-low thermal conductivity was obtained by synthesizing high-entropy samples under high pressure; the lowest thermal conductivity of resulting high-entropy (Sr0.2La0.2Nd0.2Sm0.2Eu0.2)TiO3 perovskite ceramics was 0.82 Wm−1 K−1 at the test temperature of 973 K, which is the lower value of perovskite strontium-titanate-based ceramics reported in the literature at present. The high-entropy perovskite ceramics prepared by this new high-temperature and high-pressure method also have good mechanical properties, with Vickers hardness of 10.05 GPa. This study provides a new synthesis strategy for the rapid and effective synthesis of perovskite ceramics with low thermal conductivity, which is a new method for the synthesis of high-entropy materials.

The effect of dual-sites high-entropy strategy on thermal conductivity of pyrochlore ceramics

Preparation and properties of high-entropy pyrochlore A2Ti2O7 with multi-elements at A site

Thermophysical and mechanical properties of dual-phase medium- and high-entropy rare-earth zirconate ceramics

Different Mechanisms of A-site and B-site High Entropy Effect on Radiation Tolerance of Pyrochlores

High-entropy titanate pyrochlore as newly low-thermal conductivity ceramics

High-entropy pyrochlores with low thermal conductivity for thermal barrier coating materials

Marked Reduction in the Thermal Conductivity of (la0.2gd0.2y0.2yb0.2er0.2)2zr2o7 High-Entropy Ceramics by Substituting Zr4+ with Ti4+

Design and synthesis of high-entropy pyrochlore ceramics based on valence combination

Synthesis of high-entropy La2B2O7 ceramics with non-equivalent principal elements in B-sites and their CMAS resistance performance

Preparation of high entropy ceramics with ultra-low lattice thermal conductivity using the high-pressure and high-temperature method

Structural evolution, synthesis mechanism and thermal conductivity of (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2Zr2O7 high-entropy ceramic prepared by concurrent chemical coprecipitation method

High-Entropy Pyrochlore A2B2O7 with Both Heavy and Light Rare-Earth Elements at the A Site

Heavily doped high-entropy A2B2O7 pyrochlore

Highly anti-sintering and toughened pyrochlore (Dy0.2Nd0.2Sm0.2Eu0.2Yb0.2)2Zr2O7 high-entropy ceramic for advanced thermal barrier coatings

Entropy-assistant High Insulation Pyrochlore for Capacitive Energy Storage

Influence of order-disorder transition on the mechanical and thermophysical properties of A2B2O7 high-entropy ceramics

Principal Element Design of Pyrochlore-Fluorite Dual-Phase Medium- and High-Entropy Ceramics

Unveiling the underlying mechanism of unusual thermal conductivity behavior in multicomponent high-entropy (La0.2Gd0.2Y0.2Yb0.2Er0.2)2(Zr1-Ce )2O7 ceramics

Unveiling the Underlying Mechanism of Unusual Thermal Conductivity Behavior in Multicomponent High-Entropy (la0.2gd0.2y0.2yb0.2er0.2)2 (Zr1-Xcex)2o7 Ceramics

Entropy-assisted Low-Electrical-conductivity Pyrochlore for Capacitive Energy Storage

Pyrochlore-fluorite dual-phase high-entropy ceramic foams with extremely low thermal conductivity from particle-stabilized suspension