Abstract:Iron content in gasification slag is second only to silicon and aluminum, which is expected to be a new breakthrough in the integrated application of gasification slag. Magnetization roasting is an efficient method to change the form of iron-containing phases as well as to enhance magnetic properties from slags. The magnetic variation of different particle size fractions of gasification slags (GS1, GS2) during roasting was investigated by the yield of magnetic ash particles. The magnetic transformation mechanism of iron-containing phases was revealed by the vibrating sample magnetometer (VSM), X–ray diffractometer (XRD), and scanning electron microscopy with energy-dispersive spectrometry (SEM–EDS). The results showed that the magnetic ash particle yield rose as the roasting temperature increased. When the roasting temperature was 750°C, the magnetic ash particle yield of each particle size fractions increased from 14%–21% (GS1) and 7%–18% (GS2) to 81%–99% and 29%–96%, respectively. Specially, the magnetic ash particle yield of 0.125–0.074 mm fractions increased from 21% (GS1) and 18% (GS2) to 98% and 94%, and the saturation magnetization increased from 1.80 emu/g (GS1) and 5.45 emu/g (GS2) to 10.25 emu/g and 8.23 emu/g, under the conditions of 750°C (roasting temperature), 30 min (roasting time) and 2.5 A (magnetic excitation current) when the gasification slag was roasted in air, a part of iron–containing phases was transformed from Fe(II) to Fe 3 O 4 and γ-Fe 2 O 3 , another part of iron-containing phases could be substituted into the feldspar and pyroxene minerals by homogeneous substitution. Furthermore, residue carbon combustion and gas diffusion lead to reduction of ash particle size, rough and porous surface, and increase of magnetization reaction sites, which can strengthen the mass transfer process and promote magnetic transformation of iron-containing phases in slags.

Insights into sulfur migration and transformation during the magnetization roasting of iron tailings and textile dyeing sludge

Study on the Migration and Release of Sulfur during the Oxidizing Roasting of High-Sulfur Iron Ore

Eco-friendly iron extraction from fe-containing copper smelting slag via reduction roasting with coal and magnetic separation: Experimental and mechanism insights

The enrichment and transformation mechanism of Pb and Cu in suspension magnetization roasting and magnetic separation from iron tailings

Recovery of iron from pyrite cinder by suspension magnetization roasting-magnetic separation method: Process optimization and mechanism study

Transformation of Arsenic During Realgar Tailings Stabilization Using Ferrous Sulfate in a Pilot-Scale Treatment.

Investigation of the smelting reduction mechanism and of iron extraction from high-iron red mud

Arsenic Removal and Iron Recovery from Arsenic-Bearing Iron Ores by Calcification-Magnetic Roasting and Magnetic Separation Process

Thermodynamics Evaluation and Verification of High-Sulfur Copper Slag Composite Agglomerate in Oxidation-Roasting-Separation-Leaching Process

Optimizing iron separation and recycling from iron tailings: A synergistic approach combining reduction roasting and alkaline leaching

Magnetization roasting characteristic and mechanism of gasification slag from coal-water slurry gasifier

Properties of flash roasted products from low-grade refractory iron tailings and improvement method for their magnetic separation index

Producing magnetite concentrate from iron tailings via suspension magnetization roasting: A pilot-scale study

Effect of Electroplating Sludge on the Iron Ore Sintering: Mineralization, Yield and Gaseous Emission

Experiments on effect of red mud-based slag on distribution of sulfur in liquid iron

Desulfurization Mechanism of Lead–Zinc-Bearing Hematite–Limonite Ore Through Oxidation Roasting Process

Recovery of iron from waste slag of pyrite processing using reduction roasting magnetic separation method

Insights into in-situ sulfur retention by co-combustion of dyeing sludge and wood sawdust

Study on Separation of Iron from Waste Slag of Pyrite Processing

Magnetic Properties and Washability of Roasted Suspended Siderite Ores

Pilot Study on a New Conveyor Bed Magnetization Roasting Process for Efficient Iron Extraction from Low-Grade Siderite