Abstract:The present experimental study assesses the mechanical properties of glass/carbon/glass hybrid composite laminates after being exposed to moisture in a deep freezer and elevated temperatures for extended periods. The top and bottom layers of the hybrid laminates are reinforced with glass fibre, and the middle layer is reinforced with carbon fibre using the epoxy matrix as a binder polymer material. The hybrid laminates were manufactured using the resin transfer moulding method, and their compressive and tensile properties were determined using a tensile testing machine. The storage modulus, loss modulus, and damping factors of all groups of laminates were identified using a dynamic mechanical analysis as a function of temperature and vibration frequency. The experimental results on compressive and tensile properties revealed slight variations when the hybrid laminates were kept at low temperatures in a deep freezer for extended periods. This might occur due to the increasing molecular crosslinking of the polymer network. As the testing temperature increased, compressive, tensile, storage modules, loss modulus, and damping factors decreased. This might occur due to the increasing mobility of the binder material. Particularly, the highest stiffness parameters were obtained at −80 °C/GCG (glass/carbon/glass) laminates due to the presence of a beta transition in the glassy region. The relationships between the glass transitions and the targeted frequencies were characterized. The values of the glass transition shift towards higher temperatures as the frequency increases. This might occur due to a reduction in the gaps between the crosslinking of the epoxy network when the frequency increases. The accuracy of the storage modulus results was compared with the empirical models. The model based on the Arrhenius law provided the closest correlation. Meanwhile, another model was observed that was not accurate enough to predict when gamma and beta relaxations occur in a glassy state.

Surface waviness of continuous fiber-reinforced thermosets – Experimental and numerical studies considering the viscoelasticity of the resin

Characterization and modeling of an epoxy vitrimer based on disulfide exchange for wet filament winding applications

Injection molding simulation of short fiber reinforced thermosets with anisotropic and non-Newtonian flow behavior

Numerical investigation of the effect of thermal gradients on curing performance of autoclaved laminates

Thermomechanical characterisation of reprocessable, siloxane-based, glass-fibre-reinforced vitrimers

Mechanical Behavior of GFRP Laminates Exposed to Thermal and Moist Environmental Conditions: Experimental and Model Assessment

Hygrothermal aging effect on the water diffusion in glass fiber reinforced polymer (GFRP) composite: Experimental study and numerical simulation

Empirical model for the effect of air humidity during manufacturing on the glass transition temperature of carbon fiber reinforced hot curing epoxy – a case study

High-frequency Optimally Windowed Chirp rheometry for rapidly evolving viscoelastic materials: application to a crosslinking thermoset

Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling

Numerical Study on the Effect of Matrix Self-Heating on the Thermo-Visco-Plastic Response of Continuous Fiber-Reinforced Polymers under Transverse Tensile Loading

Influence of Long-Term Moisture Exposure and Temperature on the Mechanical Properties of Hybrid FRP Composite Specimens

Optimizing Epoxy Molding Compound Processing: A Multi-Sensor Approach to Enhance Material Characterization and Process Reliability

Moisture Absorption/Desorption Effects on Flexural Property of Glass-Fiber-Reinforced Polyester Laminates: Three-Point Bending Test and Coupled Hygro-Mechanical Finite Element Analysis

Effect of rapid manufacturing on the performance of carbon fibre epoxy polymers

On the relevance of modeling viscoelastic bending behavior in finite element forming simulation of continuously fiber reinforced thermoplastics

Durability Study of Pultruded CFRP Plates under Sustained Bending in Distilled Water and Seawater Immersions: Effects on the Visco-Elastic Properties

Molecular simulation on the rheological properties of phenolic resins during crosslinking

Interface Controlled Micro- and Macro-Mechanical Properties of Vibration Processed Carbon Fiber/Epoxy Composites

Resin impregnation and interface property improvement of CFRP composite via modulating wettability of carbon fibers

Full-field investigation of dissipative mechanisms and thermoelastic inversion effects within glass-fiber reinforced polyamides subjected to low-cycle fatigue