Abstract:The processes in far scrape‐off layer (SOL) and the plasma interaction with the first‐wall (FW) elements may notably affect the tokamak discharge, since they define fuel and impurity recycling, material erosion and redeposition, wall surface heating, etc. For a long time, the far SOL description in most plasma edge transport codes was insufficient or absent at all, and so particle and heat fluxes onto the FW (except divertor plates) were out of consideration. Recently some codes, for example, SOLEDGE and SOLPS‐ITER are upgraded allowing for the extension of the computational grid up to real walls and for corresponding account of the vacuum vessel shape and all in‐vessel elements. The new release of SOLPS‐ITER (the version 3.2.0) required a development of a new code data structure and new approach to numerical approximation of fluid equations compatible with unstructured non‐orthogonal computational grid. Intensive testing of the new code in different conditions is still required. In the present contribution, such a testing is performed for the EAST disconnected double null (DDN) L‐mode discharge. For the first time, the SOLPS‐ITER 3.2.0 modeling results with drifts and currents turned on are presented, and a comparison to former SOLPS‐ITER version (3.0.8) is performed. The far SOL transport and its effects on the discharge performance are studied by comparing the computational results obtained on several meshes which differ by their width in equatorial midplane. A single null (SN) one (with mesh width limited by distance to the secondary separatrix) was examined versus two DDN meshes (one with actual and one with artificially extended targets to make mesh wider) and a true unstructured (the widest) mesh. The notable difference in results obtained on different meshes appears in those places where plasma density does not vanishes at the computational domain boundaries. For the cases on true unstructured (the widest) mesh, the particle and heat fluxes onto central column, limiters, far SOL part of targets, dome umbrella and other EAST far SOL in‐vessel structures are calculated for the first time by SOLPS‐ITER, allowing assessment of the plasma interaction with those surfaces.

Characterization of SOL profiles and turbulence in ICRF-heated plasmas in EAST

Electric Probe Measurements at Edge Region During H‐Mode Discharges in KSTAR

Characterization of SOL Plasma Flows and Potentials in Alcator C-Mod

An Experimental Investigation of Blob Behaviors in Lower Hybrid Wave Dominant Heating Scenarios on EAST

The role of RF-Induced E×B flows in the mitigation of Scrape-Off-Layer convective transport during Ion Cyclotron Resonance Heating

ICRH Coupling Optimization and Impurity Behavior in EAST and WEST

Power Balance Investigation in Long-Pulse High-Performance Discharges with ITER-like Tungsten Divertor on EAST

Metallic Impurity Sources Behavior During ICRH in EAST

Performance Predictions of Rf Heated Plasma in East

An extensive analysis of SOL properties in high-δ plasmas in ASDEX Upgrade

Study of Electromagnetic Mode Contributing Inward Particle Pinch in the Scrape-off Layer During H-mode Discharge

First results of EAST edge modeling with SOLPS‐ITER 3.2.0 on Extended Grid

Disconnection of edge coherent mode between the outer midplane and divertor target in EAST H-mode plasma

Investigation of turbulence rotation in the SOL and plasma edge of W7-X for different magnetic configurations

EAST Ion Cyclotron Resonance Heating System for Long Pulse Operation

A new probe design to measure plasma properties and toroidal correlations on the EAST

Recent EAST Experimental Results and Systems Upgrade in Support of Long-Pulse Steady-State Plasma Operation

Observation of Central Toroidal Rotation Induced by Icrf on East

Experimental Study of Turbulence and Zonal Flow in Edge Plasmas of the HL-2A Tokamak

Overview of recent experimental results on the EAST tokamak

Observation of nonthermal electrons further acceleration and long-lasting associated with magnetic reconnection and turbulence bursting in tokamak plasma