Abstract:The impact of plasma shaping on the properties of high density H-mode scrape-off layer (SOL) profiles and transport at the outer midplane has been investigated on TCV. The experimental dataset has been acquired by evolving the upper triangularity while keeping the other parameters constant. The scan comprises δ up values between 0.0 and 0.6, excluding negative triangularity scenarios. Within this study, a transition from type-I ELMs to the Quasi-Continuous Exhaust (QCE) regime takes place from low to high δ up . The modification of the upstream SOL profiles has been assessed, in terms of separatrix quantities, within the α t turbulence control parameter theoretical framework (Eich 2020 Nucl. Fusion 60 056016). The target parallel heat load and the upstream near-SOL density profiles have been shown to broaden significantly for increasing α t . Correspondingly, in the far SOL a density shoulder formation is observed when moving from low to high δ up . These behaviours have been correlated with an enhancement of the SOL fluctuation level, as registered by wall-mounted Langmuir probes as well as the Thermal Helium Beam diagnostic. Specifically, both the background and the filamentary-induced fluctuating parts of the first wall ion saturation current signal are larger at higher δ up , with filaments being ejected more frequently into the scrape-off layer. The midplane neutral pressure does not vary much between the two extreme δ up values, indicating that indirect effects of the change in geometry, linked to first wall recycling sources, should not play a significant role. The total core radiation increases at high δ up , on account of a stronger plasma-wall interaction and resulting larger carbon impurity intake from the first wall. This is likely associated to the enhanced first wall fluctuations, as well as a smaller outer gap and the close-to-double-null magnetic topology at high shaping.

An extensive analysis of SOL properties in high-δ plasmas in ASDEX Upgrade

Recent progress towards a quantitative description of filamentary SOL transport

An experimental investigation of the high density transition of the scrape-off layer transport in ASDEX Upgrade

Tokamak edge-SOL turbulence in H-mode conditions simulated with a global, electromagnetic, transcollisional drift-fluid model

Impact of divertor neutral pressure on confinement degradation of advanced tokamak scenarios at ASDEX Upgrade

Scrape-off layer (SOL) power width scaling and correlation between SOL and pedestal gradients across L, I and H-mode plasmas at ASDEX Upgrade

Inferring the scrape-off layer heat flux width in a divertor with a low degree of axisymmetry

The effect of plasma shaping on high density H-mode SOL profiles and fluctuations in TCV

Near- and far scrape-off layer transport studies in detached, small-ELM ASDEX Upgrade discharges by means of EMC3-EIRENE

MHD simulations of small ELMs at low triangularity in ASDEX Upgrade

Effect of local wall clearance on scrape-off layer electron density profiles in ASDEX Upgrade

Off-target gradient driven flows in 3D simulations of ADITYA-Upgrade tokamak scrape-off layer plasma transport

Influence of the magnetic configuration on the high-field side scrape-off layer at ASDEX Upgrade and the role of the secondary separatrix

Investigation of ELM-related Larmor ion flux into toroidal gaps of divertor target plates

Overview of ASDEX Upgrade results in view of ITER and DEMO

Dependence of divertor turbulence on plasma density and current in TCV

Flux-driven integrated modelling of main ion pressure and trace tungsten transport in ASDEX Upgrade

Plasma properties in the vicinity of the last closed flux surface in hydrogen and helium fusion plasma discharges

Pedestal properties of negative triangularitydischarges in ASDEX Upgrade

First SOLPS‐ITER simulations of ASDEX Upgrade partially detached H‐mode with boron impurity: The missing radiation at the outer strike‐point region