Abstract:The frictional strength and sliding stability of faults are crucial in interpreting earthquake mechanisms and cycles. Herein, we report friction experiments on basalt fractures, using a self-designed triaxial apparatus that allows direct shear of samples under coupled hydro-mechanical conditions. Velocity-stepping (VS) and slide-hold-slide (SHS) experiments are performed on both bare and gouge-bearing surfaces of Xiashan basalt subjected to cyclic shear velocities at 1-30 mm/s, effective normal stresses of 1-5 MPa, and pore pressures of 70-300 kPa. The measured basalt friction coefficients are in the range of 0.67-0.74, which is sensitive to gouge thickness, normal stress, and water. Specifically, a reduction in friction coefficient is observed with an increment in gouge thickness, normal stress, and pore pressure. Based on the microscopic observation of the pre- and post-shearing sliding surfaces, this weakening effect in friction coefficient can be attributed to powder lubrication. Furthermore, the VS test results reveal predominantly velocity-strengthening behavior at investigated slip velocities, and this velocity strengthening behavior does not appear to be influenced by variations in normal stress, gouge thickness, and water. However, changes in sliding velocity and normal stress can lead to a shift between stable and unstable sliding. Specifically, stable sliding is favored by high sliding velocities and low normal stress applied in this study. Finally, we analyze the experimental data by calculating the rate-and-state parameters using the rate- and state-dependent friction (RSF) theory. Importantly, the calculated friction rate parameter (a-b) supports the velocity-strengthening behavior. Both frictional relaxation (Dmc) during hold periods and frictional healing (Delta mu) upon re-shearing are linearly proportional to the logarithmic hold time, which may be attributed to the growth in true contact area with hold time. This study sheds light on the roles of sliding velocity, and gouge thickness in controlling frictional strength and stability of basalt fractures. (C) 2023 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Frictional Properties and Healing Behavior of Tectonic Mélanges: Implications for the Evolution of Subduction Fault Zones

Velocity and Temperature Dependence of Steady‐State Friction of Natural Gouge Controlled by Competing Healing Mechanisms

Quantifying Interseismic Volume Strain from Chemical Mass‐Balance Analysis in Tectonic Mélanges

The physics of fault friction: Insights from experiments on simulated gouges at low shearing velocities

Frictional properties of simulated chlorite gouge at hydrothermal conditions: Implications for subduction megathrusts

Two sides of a fault: Grain-scale analysis of pore pressure control on fault slip

Microphysical Model Predictions of Fault Restrengthening Under Room-Humidity and Hydrothermal Conditions: From Logarithmic to Power-Law Healing

Frictional Strength and Frictional Instability of Glaucophane Gouges at Blueschist Temperatures Support Diverse Modes of Fault Slip From Slow Slip Events to Moderate‐Sized Earthquakes

Unstable Sliding of Plagioclase Gouge and Deformation Mechanisms Under Hydrothermal Conditions With Effective Normal Stresses of 100–300 MPa

Frictional Strength and Sliding Behaviors of an Analogue Rock-Fault Structure: A Laboratory Study

Ultralow frictional healing explains recurring slow slip events

Frictional melting mechanisms of rocks during earthquake fault slip

Garnet fracturing reveals ancient unstable slip events hosted in plate interface metasediments

Path and Slip Dependent Behavior of Shallow Subduction Shear Zones During Fluid Overpressure

Frictional Properties of Natural Granite Fault Gouge Under Hydrothermal Conditions: A Case Study of Strike‐Slip Fault From Anninghe Fault Zone, Southeastern Tibetan Plateau

Evolution of Strength and Permeability in Stressed Fractures with Fluid–Rock Interactions

Transient evolution of permeability and friction in a slowly slipping fault activated by fluid pressurization

Seismic Versus Aseismic Slip: Probing Mechanical Properties of the Northeast Japan Subduction Zone

Experimental Investigation on Frictional Properties of Stressed Basalt Fractures

Laboratory observations of frictional stability and fault zone evolution under heterogeneous friction, rheology, and stress conditions

Physical state of water controls friction of gabbro-built faults